Printing Tools

Similar Questions

• hp8620: tools of the printer

  I installed the printer using my pc Tower, next to the router and the printer is connected via an ethernet cable, I also have a laptop, I installed the printer drivers on it, how can I install printer tools from the CD on my laptop computer, without installation and connection of the printer again? and that would be a bad thing?

  Who are interested in the installation?  If the 8620 Officejet Pro is on the network, you would be able to enter the printer's IP address in the browser of your laptop.  This will open built-in Web Server (EWS printer).  From there, there is a Tools tab, which gives a number of options, including the information of product, usage reports, backup and restore settings, utilities and more.

  

• Example: Want 5532: print photos with red stripes through them

  I have a printer Envy 5532. If I print from an sd picture card print ok, copy a photo directly from the scanner prints perfectly, but if I print photos already stored on my computer they thin red lines randomly through them.

  Hello

  Thank you for your response. Now, I found that my problem was actually confused by a number of coincidences.

  I install the printer and run test print page & copied from the scanner and printing from an sd card until the problem of the "band" appeared. When I tried to print from a photo already stored on the computer, it was when he showed first really upward. I ran the Print Tool of doctor and no problems have been reported. Similarly, the printed test page seemed ok even though of course only small colored sections there. Finally, after running test after test, the ink ran out and I had to put in a new cartridge - Eureka! problem disappeared.

  I find, therefore, that I had a faulty cartridge that was causing the problem. I have since run a photo on the 'best quality' on Photo paper and it looks perfect. The high price of the cartridges, it was a costly exercise, but at least I'm now able to print my photos which is what I bought it for.

  Lagartija.

• Problem with network printing on HP C6180

  It is a strange... I installed the drivers from HP on a new MacBook.  HP printer tools can see the printer (we can see the web services of the printer and can see the status of printer ink) but when I go to print in Word... the document hangs in the coil.

  It seems to be a timeout issue... or a problem of communication... in these events should be... because I see the printer... I am at a complete stop on the way to get this impression of thing.

  Thanks for any help you can offer.

  What type of connection (wired or wireless) network do you use for your printer?

  You can browse internal printer tab Hello of Safari Web page?

  If you can browse your printer, then try to delete the print queue of the printer and add it again.  To do this, since your Mac system preferences, print and application.

  Best regards / Jim B

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• I have an Emachine and a Brother printer, cannot install the printer

  I have an Emachine with Vista, AVG security.   Had a Brother printer.  Printer has worked one day, wouldn't work next day.   Computer won't let me uninstall or reinstall, nor can I do a backup now.   Took and said it was the printer, the new printer, same story.   What is going on.   I am po'd when I call a number of aid and get some yahoo in India.

  Hello

  1. what exactly happens when you uninstall and reinstall the printer?

  2. you get any error message?

  3. how you try to install the printer drivers? (With the help of CD or by downloading the driver)

  4. What is the number of the printer model?

  5. What is the model number of the printer that you bought?

  6. How are you trying to backup?

  7. are you any errors during the backup?

  Please see the article mentioned below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001500/000009/faqp001509_000.html?reg=us&c=us&lang=en&prod=ql1060neus

  Please download the removal of printer tool suitable for the model number of your printer

  Click on the link below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001400/000038/faqp001438_000.html?reg=us&c=us&lang=en&prod=ql1060neus&cat

• OfficeJetPro L7680 print not Cyan (with no error message)

  Hello

  I have a HP OfficejetPro L7680 AIO.  It is 2-3 years.  It has original print heads and replaced the HP ink cartridges.  BLACK is XL ink, I'm starting to buy the XLs for other colors, but I generally by the combo packs for the best prices.  I use to use domestic (mainly documents/newsletters) and probably replace ink every 6 months.

  For the holidays, I was working on a Photo project for a neighbor, print a photo 8 x 11 (on paper until the final version was made).  AKA, I was printing a LOT of ink, MANY times in the day.

  The CYAN BLUE ink is low and must be replaced (as usual).  I replaced the INK with a cartridge (which may have been 6 + months since I buy the combo packs).  The saved printer of ink FULL and continued to print.

  Approximately of 10 runs later, BLUE printing stopped in the middle of the image.  I couldn't make it work since.

  I have:

  • Restarted the PC and printed in different applications
  • Different PC print
  • Print-out of Internet connections and USB
  • Printer unplugged (for 30secs) and rear plugged in.
  • Pull out/Pushed backwards in the ink cartridges and printheads
  • Ran printer tools: cleaning print head, head alignment, test Pages
  • Bought and installed a new cartridge Cyan XL
  • Print "several" more photos on paper & photo - in the hope of blocking are sorted?)
  • Left unplugged for 30 minutes and restarted (recently) printer

  Altogether, the printer displays no error message.  Prints documents still printer with work yellow, Magenta and black... just the Cyan is not printing.  At other times (for example when the ink is too low), the printer displays an error message and prevents any impression until the issue is resolved.

  What do you think happened?  Do you have any other ideas?

  The only things left that I can think of is that the ink line is blocked or the print head is blocked.  How can I check this before spending $ 70 for a new print head, which is a big investment without knowing if it will work.

  Thank you

  -Jason

  The print heads will probably be replaced. Just to be safe, go through the documentation below the link. To replace the print head, you need to contact technical support.

  http://support.HP.com/us-en/document/c01957673

• HP Photosmart Premium c309g-m is not a mirror image print option-help please

  After twice be uncoupled from the HP chat support, I landed here in this forum and need help please...

  The ability to print a mirror image is not anywhere in my printer tools/options. I need it to be able to print some iron

  images. I think the cat people couldn't help me and just hung up on me, they seemed confused as to what the problem is. Does anyone have an idea how to solve this problem, it is not a question on turn on or the other, he's not here to turn on Keller.

  Thank you

  Donna

  Check the iron-on package of ink specifications.   Make sure you use HP iron-on paper.

• HP Laserjet 1020 will not be printed. Don't market not even register on the print queue. Don't test print page

  My HP Laserjet 1020 is erratic for a few weeks now. Sometimes, sometimes not print. But before the print job would record at least and usually, but sometimes not print. I would like to move the cable to a different USB port & some time which would be worlk. Suddenly, it stopped printing altogether. I have uninstalled & reinstalled. Tried the doctor print tool (twice now) and now the print job does not record. I also replaced the cable with one of my other inkjet printer (which works fine) & which made no difference. The doctor says all printing tool's fine but when I try to print the test page it won't register as a print job in the queue. In my view, which covers it completely. As for having downloaded anything lately, I have download Teamviewer and Utorrent, but I'm sure it was faulty before you download those anyway. Hope someone can help me. Thank you

  Oh... it worked fine for 6 or so years I've had. Bought new. Don't tell me the ink is low or anything like that.

  Return to the Vista by default; problem now seems to be resolved. Thank you for your help.

• I can't print with my HP Officejet 6500 E709a

  This problem started about 2 weeks ago. Whenever I sent a foc file or an image to print, the printer made some sounds, the page load, tells me the message "print... "like nothing. The printer is blocked like that until I me fraustrated and cancel this task.

  I have a PC with Windows XP.

  I tried to uninstall and remove all traces of my PC HP software, download the latest installation software and re-installing the printer. One that I have completed the installation I tried to send a page to a test print, but it got stuck.
  I ran the HP doctor and tool which could not fnd to analysis any problem.
  I opened the printer tools and sent a page of statistics to print and which was printed successfully for some reason any.
  I took each cartridge and re-installed to ensure it is in place. All of them still have ink in them.

  Please advice, I am in the middle of an exam period and I really need my printer to work as soon as POSSIBLE.

  Thanks in advance

  Have you tried to replace the USB cable?

• Photosmart 6520 does not print

  I have a Photosmart 6520 printer that gives me an error message when I try to print something from online my HP chromebook. This problem started a few weeks ago, before that time, I was able to print. The error message I get on google cloud print Web site is: "error in the external employment service". I was just on the phone with HP tech support and they could not solve the problem. Anyone here know how to fix it?

  Hello bassplayinlady,

  Welcome to the Forums of HP Support!

  I understand that when you try to print via Google Cloud Print to the Photosmart 6520, you get an error "error in the external employment service". When you talked with HP Technical Support, troubleshooting steps did make?

  Are you able to print from the printer by any means, a copy, post, etc.? To print a self-test; Press Setup (wrench to the right of the screen of the printer) > tools > Printer Status Report.

  Try printing via ePrint and let me know if it works as well.

  Getting started with HP ePrint Mobile Apps<>

  Can't wait to hear back on your part.

• How could I FIND ON HOW to PRINT A ENVELOPE O WORDPAD on WINDOWS 7

  I installed Windows 7 on my desktop a lost my Microsoft works program so now I use Wordpad then how do I print an envelope on my printer with wordpad

  WordPad is very basic and does not include envelope printing tools.  If you want to try something more powerful without spending money, a possibility is OpenOffice.  It does not include envelope printing and other features: http://www.openoffice.org/

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• EPSON STYLUS CX4800 print the image comes out blue instead of the other colors

  Original title: printer

  Each time, I printed the picture comes out blue instead of the other colors, I have only blue. If I want to print a photo of family is blue spell. What can I do I have an Epson STYLUS CX4800

  Hello

  1. What is the color of ink cartridge in the printer?

  2. the problem occurs only in print images?

  You can search the print settings in the printer tool and select the color according to the requirement. Also make sure that the cartridges are properly ventilated and locked.

  Epson Stylus CX4800 all-in-One Printer

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQ&OID=58606&prodoid=56291067&FOID=63653&cat=30961&SubCat=30963

  You can watch the frequent question on the Epson Stylus CX4800 printer:

  Epson Stylus CX4800 all-in-One Printer - FAQ

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQs&OID=58606&prodoid=56291067

  Alternatively, you can contact Epson for more assistance on the same:

   

  Welcome to Epson support

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes&expansion=1000000

  Hope this information helps. If you need help with Windows, just tell me and we will be happy to help you.

• General photos of troubleshooting for print quality problems

  Click here to see the detailed description of the following topics for Diagnostic tools and maintenance to get the best photo prints.

  What is a quality Print diagnosis report?
  How to print a Diagnostic print quality report
  Potential problems that could appear in the report
  What to do if you see flaws on the report
  Example: Printing is spread?
  How to clean your print heads
  How to align your printer
  Find a printer HP Photosmart printer tools

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!