The clock animation

Hello

I just created a demonstration project of a single analog clock animation http://www.ideasintime.co.UK/ANI.html

What I would like to achieve is to also have a digital clock just below. So when you hover over the analog clock, the animation starts for two clocks. When you roll off the animation stops which leaves the time displayed exactly the same on the two clocks.

So basically the two clocks are running simultaneously (accelerated)

Any ideas how I could do this?

Many thanks and best wishes,

Damien

Hello Damien,.

I'm sorry that I wasn't able to move for a response earlier. We welcome you to have somewhere with Actionscript!

"I hope that I'll have to create a digital display of the minutes and hours, image by image. When you roll off the power, and the animation stops, the analog and digital clocks MUST be read the same hour. Is there an actionscript which would speed up the process? »

In my view, that a timer would probably work for you. For example, to use the following code, you would create two dynamic text on your scene titled "txtHour" and "txtMinute" fields to display the hour and minute respectively.

The following code would then be dynamically fill these fields of text at the present time and minutes based on periodic timer events.

var myTimer:Timer;

var intHour:int = 1;

var intMinute:int = 0;

function init (): void {}

display the current time in the time text box

txtHour.text = String (intHour);

initialize the timer to trigger the timerHandler 12 times a

Second, for a total of 60 times

If you want to trigger an event once per second for 60 seconds

you would use (1000, 60) instead

myTimer = new Timer (83.33, 60);

create listern to event for the timer event

myTimer.addEventListener (TimerEvent.TIMER, timerHandler);

create event listner for timer full

myTimer.addEventListener (TimerEvent.TIMER_COMPLETE, timerCompleteHandler);

start the countdown

myTimer.start ();

}

function timerHandler(e:TimerEvent):void {}

intMinute = intMinute + 1;

txtMinute.text = String (intMinute);

}

function timerCompleteHandler(e:TimerEvent):void {}

intHour = intHour + 1;

txtHour.text = String (intHour);

If (intHour + 1< 12)="">

intMinute = 0;

myTimer.reset ();

init();

}

}

init();

As for the problem of masking, is it possible in your design just make solid spiral? In this way, it overlay you the spiral above the background (body clock), the body will not show through.

Good luck!

Tags: Adobe Animate

Similar Questions

  • clock animation help

    Hello, I have to make a special clock animation. Can you let me know if my next method sounds right, or if I have to use another program or technique?

    I use an old clock (bitmap) image, he will have an hour hand and a minute hand. the minute hand passes 59 times and the hour hand will change 11 times. who is 649 images before the image starts again!

    If the hour hand and the minute hand split into separate layers, it will only be 70 separate images. If I do change 59 frames with the minute hand layer and the layer of the hour hand remains the same. Then I was going to copy and paste all frames of 59 minutes, but change the layer of the needle of the hours for the next hour. I was going to repeat this process until I arrived at 11:59.

    animated GIFs can even make 649 frames? what it will be fairly simple in fireworks? or do I have to use flash? Flash with bitmaps seems fair. I prefer to do a gif animated since all browsers show it (like the iPhone)... and cs3 has the ability to flash - like now.

    Thanks for any advice you may have! Forgive me if I am crazy!

    Thank you all! I'll see about flash, too (no offense, fire Fireworks!). It would be nice to do effects mouseover to the hour and minutes Flash instead of the clock ticking to an animated gif.

    Oh and amy is a good idea! that will keep the size of the file down. at first, I thought "duh", Hey Hey. but then I did read your post and I realized that I can have 3 separate images on the page.

    I use absolute positioning with CSS, and the order of the images doesn't matter, because the they are all transparent and that they do not overlap. the file of the minute hand will be always great, but it won't 59 frames, not 700 frames. I was a fool before man. This way is much better.

    If there is no waiting for the image of the minute hand, hour hand and the background load really fast in the meantime.

    Thank you again alex, pjr and amy...

  • format of the clock after upgrading to IOS 10

    After the upgrade to IOS 10.0.2on my iphone 6 s the clock passed using two points using a format point.

    Language and region are still like before upgrade: Norway.

    I tried to change in various other regions which, to my knowledge, uses the same format of the clock, but there is still a point. Is there another way to change this?

    Hi, ferdinanden!

    Thank you for reaching out by Apple Support communities. From your post, I understand that your clock is not displayed as expected in the iOS 10. Rather than see a colon, showing time as 07:32, you see just one point, displaying the time as 7.32. I would be happy to offer help!

    There could be a few different things going on to cause this, and change your region has been a great first step to understand that and fixing it. Given that this did not help, try the following steps. Before you start, use this article to create a backup of your iPhone: How to back up your iPad, iPhone or iPod touch

    1. Replace it with another under settings > general > language and region. See if that allows you to adjust the way in which the clock is displayed. If so, revert to the language of your choice and see if she spends exactly the point again.
    2. Make sure that the value is automatically enabled under settings > general Date & time
    3. Restart your iPhone by following the steps here: restart your iPad, iPhone or iPod touch
    4. Reset your iPhone settings in settings > general > reset > reset all settings. This will not delete your personal data (such as your photos/videos, contacts, calendar of events, etc.) but it can reset it customizable settings (as the wallpaper / brightness, alert sounds/ringtones, the Date and time settings, etc.) to their default values. It will also remove saved passwords and Wi - Fi networks and all previously used settings APN or VPN.

    Have a great day!

  • What happened to the clock app in the iPad?

    I used to use the clock application in my iPad while you sleep as a kind of a large wall clock.

    I just had open the app, tap on the clock I need, and he immediately enlarged its display and occupy the entire screen.

    After that 10 updated iOS, the clock app is different in this regard and I can't enlarge the clock by all means.

    Is it just me or the clock app came from changes (other than the bed/alarm thingy)?

    Hope to have it back to know the time so only on my bed

    Hello

    Go to app store download world clock.

    See you soon

    Brian

  • iOS 10 - How do I get the clock to display the seconds?

    Recently updated my iPhone iOS 10.0.1 6s.

    After a power failure, I was re-creation of different clocks and discovered that the "Clock" Apple app displays more seconds in the "WorldClock" pane In addition, I can't change for the clock faces 'analog-style' in this application. The application icon has a small second hand in the home screen, but it's pretty hard to use when you try to put clocks in the second. Any thoughts?

    As far as I know, the clock of the world cannot do that, which is a pity. I wonder why they decided to remove it. Perhaps he used too much energy to the battery?

    Thank you for pointing out that the application icon displays the seconds hand, I never noticed that before.

    It is discussed by the Parliament, but the only solution which they suggest is to get an application:

    in the new iso standard 10 analog world clock update?

  • Behavior of the clock with iOS 10

    After the upgrade to iOS 10.0.1, I discovered that the clock keeps causing my iPhone 6 restart. It is reproducible.

    Simply click on the application of the clock, check your alarm. One of my detectors is snoring. Then finally the phone resets. On other forums, the clock shows a background dark void before it causes the phone go in to reset. Until I am aware of a solution, I'll have to use my alarm of third party application.

    P.S. Siri requesting it to set the alarm Gets the same result, after that it crashes and then apologizes for not be able to do.

  • Move the clock on iOS (iPad) to lock screen 10

    I just updated my iOS 10 iPad

    and now when I turn my iPad. Landscape of the clock on the lock screen moves to the he left.

    help help that ASAP can it change in the Middle?

    I don't think you can. I searched my iPad and the manual and you cannot see anything on the clock moving.

  • Why the clock on my calendar seems to be working at the time of the West Coast, while my ThunderBird is defined and works well at the time of the coast is?

    Ladies and gentlemen:

       I recently started using Calendar add-on to Thunderbird. My test event entered okay. But, my invite showed up on my colleague's PC with meeting time 3 hours late. That is, my meeting time is 11:00 Eastern time. But, he got the time as 14:00 which was 11:00 West coast time. I checked my "Calendar" tab view. There is a tell-tale sign that a red horizontal line that appears to follow my PC's real time clock but lagging 3 hours behind. So far, I could not find how to synchronize them.

       My PC was used on the West coast for several years before I brought it to the East coast a few months ago. Since then, my Thunderbird appears to run fine with the clock setting changed to the East coast time zone. Could there be any kind of memory somewhere that took my numerical 11:00, but recorded it by tagging as a West coast time zone entry?

    Abe (2015-10-11 11:54)

    Make sure that you do not have the correct time zone set lightning (calendar).

    In the top right of the Thunderbird window, click the menu button > Options > Options > calendar > general tab > zone

  • Why the clock it is not on the home screen?

    Hello. I have a phone of Hamachi, with version 1.1.0.0 - prelease and the first screen the search bar Adaptive app. Can I move this search bar to the left screen and get a clear screen with the clock without locking the phone? Or add a new screen, second here and add the clock?

    Thanks in advance.

    The clock was removed as a widget on the home screen and moved to the upper right. I think you may have seen a 1.0.1 version or earlier.

    1.1 no longer has the clock on the homepage. It wasn't Alcatel; It's a change of function at the point 1.1

  • I would like to be able to display the clock on my computer

    When I run Mozilla it takes my screen and I would still be able to see the clock in the bottom right of my computer screen. How to allow me to see my clock?

    I think that your Firefox is full screen, return to normal press F11

  • I can't get the move animation to automatically trigger the next slide

    Hello

    New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

    Pointers or help with this would be really appreciated.

    Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

    the value of the drop of Transition start automatically

    Enter an amout for the delay, if any

  • The clock on Apple Watch display

    He calls a watch but you do not see the clock because the screen went black all the time. How cool would it be if the clock remain to the watch without having to press a button or tap the screen?

    He called the "Apple Watch" but without the clock is so cool!

    We are users like you

    Please give your comments to http://www.apple.com/feedback

  • Change of the clock at the start of Vista

    My girlfriend has a HP laptop. The other day, that she told me that his computer was taking a long time to start, stuck on a black screen. She said she has stopped and restarted, it and when it restarts, the clock changed the time. I didn't know if it was a question with what whether or not? Anyone know?

    Hello DammagedEddie,

    If it changes at EACH start/stop, it could be battery RTC, not in possession of his office... but if it doubles only happened once or twice... check the TIME ZONE and all TIME settings... make sure that its all natural

  • How can I change the time on the clock?

    I use a computer setting Windows7 and cannot find instructions
    for setting the clock.

    If you have changed DST advanced in most of the United States / Canada change should happen automatically (FALLBACK). Change your settings by right clicking on the clock at the bottom right and choose "Adjust date/time" (Windows 7)

    Under "change the time zone, indicate if change you time for daylight saving time.»

  • Add-ons Manager will not open watch just the loading animation

    Try to look and check out the modules using the Manager of modules as follows:
    Tools - modules leading to new tab opening, but all that is displayed is the loading with the timer animation icon. I've now left on for more than 45 minutes before writing this information.
    The problem arises after the upgrade from Version 4 to Version 5 earlier this year.

    I had this problem a few hours ago. It acts like the Add-ons Manager is "stuck" loading all Extensions and Plug-ins.

    Try this "correction". (It worked for me.)
    Restart Firefox in Mode safe (go to help-> restart with modules disabled...)
    In Safe Mode to display the Manager of modules again. It should take over.
    Verify that you can see the list of Extensions and Plug-ins.
    Manager modules, additional check updates.
    "Restart Firefox to return to" normal ".
    Start the add-on Manager.
    It should load normally.

Maybe you are looking for

  • iOS date shown in the mailbox

    Hello I would like to know if the date specified in each email in the list content of mailbox messaging App, refers to the creation or the last modification date. As in the example attached. Thank you.

  • If I spend 10.8.5 to El Capitan, will I still be able to sync my iPhone Contacts locally 4

    Locally, can I synchronize Contacts and calendar with iTunes between MacBook and iPhone 4 with OS x El Capitan - NO iCLOUD?

  • Speedport W921V ix2-2

    Hello for a while, I try to activate my personal cloud on my NAS ix-2. I tried to do as described in textbooks (which are not too useful). I already got it to the point where my 2 ix2 thought the installation was ok (but I still lost this configurati

  • Acer Predator XG270HUOMIDPX - how to set 144 Hz?

    3 months ago I bought this monitor - Acer Predator XG270HUOMIDPX. When I plugged the operating system does not recognize the at 144 Hz to 60 Hz. refresh rate I had to put a resolution to 2560 x 1440 on 144 Hz. Even after a fresh install of the OS (Wi

  • Computer crashes when you use the RunAs service.

    The computer stops responding completely after using the RunAs service. Microsoft Word hangs intermittently so. I checked for bad RAM and malware. I think an OS reinstall will fix this problem. It is Windows XP SP3. It's a Dell.