How to get the system user-defined font

Similar Questions

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to get the system time?

  I want to get the system of unit of bb and information of AM/PM time. Can someone give me some code examples? Thanks in advance.

  Time system is stored as a number of milliseconds from an arbitrary date s in the past. You get this time using System.currentTimeMillis)

  You can extract the various components of the agenda of the time using the Calendar class.

  You can also create a SimpleDateFormat object to format this time for display.

• How to get the top users page?

  Hello

  How to build the top users page with which users are more recently logged_in to the application? Similar to the picture here

  

  --

  Thank you.

  Venky_prs wrote:

  How to build the top users page with which users are more recently logged_in to the application? Similar to the picture here

  

  Create a report of region using a query like:

  select
      user_name
    , max(access_date) most_recent
  from
      apex_workspace_access_log l
  where
      authentication_result = 'AUTH_SUCCESS'
  and application_id = :app_id
  group by
    user_name
  

  Use of the ' 16 hours ago" number / Date Format MOST_RECENT column.

• How to get the system on disk vs download upgrade

  I'm trying to upgrade the system 10.8.5 to El Capitan. I'm pretty slow - Wildblue - on access to the internet and my screen shows that it will take 10 hours to download. Ouch, which will use a large part of my available bandwidth for the month.  HOW can I GET the upgrade of the system on the disk to install it manually?  Thank you!

  You can not. Take your MacBook Pro to a place that has a faster internet connection.

• How to get the system tray at the bottom of the monitor

  I found that the system tray icons had moved to the right side of the monitor. How do I get back them down

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• How to get the system during the report generation time?

  Hello
  I develop a model in which I am required to display the data of the current year only. Is there a method by which I can get time system (from which I extracted the year)?

  Hello

  If your model is rtf you can add a template field "Date" with the "yyyy" format mask, or add a form field with and same format mask as precedent.

  Kind regards
  Colectionaru

• How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winserverDS

  It will be useful.

• How to get the Subvi (the virtual path is in .exe) reference in Run Time System

  Hello world

  The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.

  More details:

  Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.

  After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi

  So, how to get the reference of the Subvi in Run Time System?

  I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.

  In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.

  Thank you

  chenyin

  That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.

  The dynamic call should be used in a user control, but some parade can avoid problems.

  It depends on why you use dynamic calls...-online 2 main ways:

  -Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer

  -Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.

  In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.

  So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.

  Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...

  Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)

• How to get the values of page jspx (view layer) to the custom method defined in AM

  Hello
  
  I have 1 text field and 1 submit to homepage.jspx. When I click the button submit, it will call the custom method defined in the 'Module of the Application' java class (ApplicationModuleImpl.java). Can I know how to get the value of this text field in this custom method.
  
  I used the getter and setter method, however it didn't work as it is defining the value correctly, but get method returns null. Its not allowing to use FacesContext. Could someone please tell me how to get the value of the text field to this custom method (that is, using ADFContext,... something like that)
  
  Thanks in advance

  User,
  you have mixed up something here. Bean (as you did) cannot use the module of the application. They belong to different layers.
  I suggest you to look at some first tutorials (http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm) or watch the developer guide http://docs.oracle.com/cd/E16162_01/web.1112/e16182/toc.htm and take a look at some of the videos http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html

  Timo

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

  Vista Ultimate 64-bit

  How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

  Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

  Hello

  If you want to start directly on the desktop?

  How to automatically connect at startup in Vista
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Or

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  =========================================

  Start - Control Panel - Power Options - upper left - require a password on wake up
  tick her do not require a password - save the changes.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin

  original title: admin password.

  I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.