The computer back to the setting factory

Similar Questions

• my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  Hello

  Recuva worked for posters that have been in your same situation here

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• U2415, return to the setting factory?

  How good and accurate is it? It seems exceptionally well to me naked and untrained. I also Colormunki Display as well. So, I could go further if it would improve even more?  I'm not going to lie. I ran Colormunki Display to try. Brightness was set at 29, to 120cd. Factory has been meteoric upstairs. The image seemed a bit improved? How can I explain. Richer looking colors, etc. Placebo effect?

  Reference "says" Dell as its monitros U are calibrated to an average error below a value of factory, I think it's 3 deltaE (no claim on which version: 76, 94 or 00)

  It is an average error, there are values above and below the average value. For example, white, you can get a white 'color' (255,255,255) far enough away from the D65 (internet & white video standard) to be noticieable, but means error keeps under spec.

  A sRGB screen could be ouse out of the box, so white and gray ramp (under no color management environment) shows a neutral color, alias "without color". If you like it... it's an sRGB display, no calibration is required, but the only way to test is to measure.

  With widegamut displays as WG CCFL (U241, U2711) or new GB - LED Dells (U2413.. etc), a correct measuring device IS REQUIRED, with all manufacturers (dell, nec) display. Meter better today for this type of photography poster is i1DisplayPro colorimeter. It is by far more accurate than the spectrophotometers Xrite low costs such as i1Pro2 (or lower spec'ed brothers).

  A display of colormunki sharing material and accuracy with i1Displaypro, BUT:

  -It is 5 x slower

  -CANNOT use it to calibrate in-house ALL monitor (dells GB - LED, NEC, Eizos..) because blocked Xrite drivers to do, and these companies use the colorimeter manufacturer drivers.

  Xrite - software for Munki Display * s * u * k * s *, but not as good as ArgyllCMS i1Profiler comes with i1Displaypro. My advice with calibratabe screens not hardwre like yours is to use ALWAYS ArgyllCMS and its DispcalGUI interface.

  You have an sRGB IPS WLED display, then you MUST USE WLED spectral correction with calibration software. "Spectral correction '' is a way to make precise measurements with this high performance colorimeters and is independent of actual spectral sensitivities of YOUR unit. "Correction of matrix" do not have this feature, so if posible use 'spectral corrections' (BDUS o CCSS files in the Xrite or ArgyllCMS naming convention)

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• After putting the computer back to factory settings, there is no internet connection in XP

  I just put my moms old computer back to the factory setting and mounted a new ethernet card. His ISP is Virgin Media, which you do not receive a disc for. Usually, it connects via a wireless D.Link router and its operating system is Windows XP. When I try to connect to Internet Explorer, I get "cannot display the webpage:." Any suggestions please?

  Thank you

  Debs

  Hi, Deborah17,

  I would say to contact Virgin Media for assistance with wireless - according to this they have a rom installation

  How to manually configure my wireless router cable Windows

  http://help.virginmedia.com/system/selfservice.controller

  If you are experiencing network connectivity problems in Internet Explorer, the first thing to do is to make sure that all cables are connected. Then open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair (if you use Windows Vista) or solve problems (if you use Windows 7).

  If the problem persists, see the following articles:

  • Network connection problems
  • How to troubleshoot network connectivity problems in Internet Explorer
  • The problems of Internet connection
  • Internet Explorer error "connection timed out".
  • Why is my Internet connection so slow?

  I hope this helps.

• If I put my computer back to factory settings, will it get rid of the virus?

  If I put my computer back to factory settings, will it get rid of the virus?

  If I put my computer back to factory settings, will it get rid of the virus?

  In * most * cases, Yes.

• DV7-7240US: HP Recovery - cannot reset to the original factory HP setting

  Recently, my original Windows 8 has been updated to a new version of Windows 8.1. It was an automatic update of my laptop, I didn't. The next day, I discovered that the system was very slow and freezes in some places. I can not even restart or shut down the computer. It forced me to press and hold the power button to stop and restart the machine. It took some time for my machine load and start the window; Sometimes, it took about 30-40 minutes. This incident has happened very frequently, I have to turn the machine on too often. Now, I got the message when he was loading: diagnostic Systems, error disc, press the auto repair. "Then he started scanning it says on the screen: ' disk scanning error. This process may take longer than an hour. "He was allowed to return to 8.1 Windows for the first time. Then, the windows was frozen again. I forced to turn off and turn on the machine too many times, this machine was hooked during the scan disk error. He showed the scanning process 0% throughout the night I left the machine. I can't load the window again. Therefore, I have to go to the F11-system setting, keyboard language was loaded on the screen. Then I chose us. The next screen, I clicked on troubleshooting, HP Recovery, restore the system. It did not work. Then, I selected Reset to the original factory setting. He asked to make a backup of the file. I chose the automatic backup of the file, and then move forward. The backup process has crossed at 63%, then the pop-up error: error ffffffff15, data code = 6. I tried to go back and backup file again, it gave me the same error. Then, I tried to reset the system to the initial factory setting without saving the file. I clicked on the warning message about all of the hard drive will remove if I proceed. Then I got an error and can not proceed with other measures. I then tried to reset the systems with USB I created HP Recovery Manager after buying the machine. "When I tried to restore the initial factory setting, it gave me an error message:" the target drive is not connected. "I don't know what to do now. I guess, I need HP Recovery DVD or HP's USB flash drive in order to restore the factory setting of windows 8. I don't have the recovery disk when I bought my HP laptop. I even created one with USB, copy of the record of HP recovery support, but it still doesn't work. Help, please! It's really frustrating.

  Yes, you got the error code indicates a bad hard drive.

• How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  This setting should be preserved, once you set it... so I'm not sure why you have to define every time...

  Then... Make sure that you put on ALL the tools of the art of logic in the preferences of LPX...

  Otherwise... you may need to reset the prefs of LPX... Put all the Tools Advanced again and the other preferences you have set... and see if that fixes things for you...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!

• How can I keep my computer back to 'place' after that I put it manually using the 'list '?

  How can I keep my computer back to 'place' after that I put it manually using 'list '. There must be a master setting, but I was not able to understand it yet. I have to do this every time I open a file.

  I checked "remember to display each file settings" under "Tools - Folder Options," but it does no good.

  * original title - cannot set the defaults.* view

  Hey, Wesley!

  I tried some time ago, and it will do no good. I returned periodically to ensure that it was not unchecked, but he didn't.

  Someone posted a response that a registry key has been corrupted and offered instructions on how to fix it. I ran utility troubleshooting, but that has not helped and was about to try to change the registry, but the message seems to have disappeared.

  I tried to reinstall Windows on Windows, but the installation stalled after starting the system successfully. He must have done something right, because each window remains now as I put it, so my problem seems to have disappeared.

  Thanks for your interest. If someone asked me, I would recommend refreshing Windows to solve the problem.

  Best,

  Bob

• biometric: How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?

  How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?  When I walk away from my computer for more than 3 minutes... I have to re-do move my finger.

  If you mean every 3 minutes you get disconnected so your finger is to open a session back, right click on the desktop, select Personalize downstairs, and then in the new window click on screen saver or turn it off or set the number of minutes and make sure "on Resume, display logon" is NOT selected. If it happens again every 3 minutes, return to customize, select this time power options and change the time it takes for the screen to be able to something higher.

• Question about backing up the Lenovo factory

  Hi, I have an E530, I have a question about the Lenovo factory back, I'm a little unsure of the difference between the bootable media and just backup data.

  Is the bootable media just the equivalent to a disk of windows 7?

  the option data backup all currently installed on your laptop?

  I tried with the two checked options the other day and I got to the point where he solicited for disc DVD - RW 6 so I cancelled because I didn't know how much in total he would do, would be nice if he told me so I could better prepare.

  Also, if I was ever to use the data disks, would you boot from the startup disk you did first then also boot from CD 1 of the data disks?

  Hi James,

  We create these disks to customers of all time.  In our case we have Win 7 Pro, pre-loaded.  Win 8 discs are already included with the device.

  The process of factory recovery disks will create a set of disks [the E530 in the USA, to 4 DVD - Yes it would be nice to know how much to advance] will allow you to restore your machine out of the box.  The first disc it creates is a boot disk - you start from this when you start the recovery process - that's all it is. No file data/images for the restore process.  Other disks contain image files needed for restoration.  This does not save the user data. It is a different process.

  Since you started & cancelled the process, I'm not sure that it will allow you to re - burning the discs.  Because of the MS license restrictions, you are allowed to burn discs once.  We got all the way on the last drive and had the process fail [we don't know why - maybe bad disc?] and we cannot redo records because he thinks that we have successfully created their.  So, we have to call Lenovo support and ask them to send us a set of disks in Windows 7.

  I hope this helps...

  Al

• EU I scammed by onlinetek, which are the correct authorities their report and who can help me to recover my computer back to normal.

  Indians kept constantly calling and convinced me to sign up and they would protect my computer for a fee (which I paid by credit card), they were very convincing even had control of my cutsor. After many attempts to communicate with them in different ways, I got no response at all, my computer will not update anything and goes very slow, which report to aand who can help me to get my computer back to normal, I've never had any problems until I signed up with them, they are very good even show your computer infected files on your computer, I'm not good with computer stuff so any help would be appreciated.

  Thank you

  First, contact your credit card company / bank and have to cancel your card for a new. You have made a serious mistake.

  Then reformat and reinstall the operating system on your system.

• need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  Most OEM computers have a partition on the hard drive, that allows to give it bought as provided.  Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup.  Look quickly at the first screen that appears, and you could see the key that you press.  Otherwise, go to your computer manufacturer's website and download the manual for your computer.  Instructions must be there.

  HTH,
  JW

• Return to the default (factory) setting for a zip (compressed) file

  Involuntarily, I changed the setting to opening a compressed folder (zip), and now all of my compressed folders display the logo of the program windows Word. I'm trying to undo that and not any program used to open a compressed file. I want to have all other files compressed in the computer returns to its initial position, too, as they have all changed. Any help, I can't get there. I went in the extensions folder and found the zip extension and it shows that the Word window will open all zip files. The only choices that I seem to have is nothing that I want, I am not having any specific program open a zip file. Thank you

  Hello

  I would like you to perform a system restore to undo changes made-

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Note: Perform a system restore will cancel all changes made on your
  computer earlier. You may also lose unsaved information as well. Proceed to your
  own risk.

  Let us know if it works for you.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]