The computer hangs after installing the latest updates

Similar Questions

• Computer hangs after installing windows updates...

  computer hangs after the installation of update.  Full system restore and the computer worked fine for a week. Has started having problems still... verified and automatic updates for windows have been downloaded and installed today. Confused about where to go from here. Help, please. Thank you!

  To be clear, the issue is not appeared since the updates have been installed one at a time, correct?

  KB2447568 is A compatibility view list update is available for Windows Internet Explorer 8:23 November 2010
  The KB updates a file in Internet Explorer.
  There is a small chance that Trend Micro has a conflict with the update. If this is the issue, then there would be more posts on this topic.
  This looks like a temporary glitch occurred.

  The only suggestion I would make is that when there are a bunch of updates, as there was in December, then it would be better to install the most complex by themselves.
  This would mean that changing setting Windows updates for "download updates for me, but let me choose whether to install them.
  For example, the cumulative update for Internet Explorer, KB2416400, would be installed last, and by himself.

  And, since you pick a time to install updates that have been previously downloaded, then you can install them in groups of 4 and If it is another problem caused by them or their installation, you will be able to refine specific update was the cause.

  Expert MowGreen Windows IT Pro - consumer safety

• The computer hangs after installing an update from McAfee.

  When McAfee performs an update on my computer, sometimes it takes turn off computer and do a reboot before they take effect.  Well, here's where the problems start.  When the computer turns back the cursor will not work, I have no way of online and even less off the computer.  I had to manually shut down the computer and restart with no luck there, too.  I had to resort to a restoration of systems even get the computer to work.  McAfee came with MSN I use and there has been no touble until last month of December.  Any help would be greatly appreciated.  I have dial to connect.
  Thank you very much!

  Original title: McAfee update

  Personally, I would recommend dumping McAfee and using a more reliable program such as Microsoft Security Essentials.  Except that if, you should contact McAfee and see why it creates so many problems for you.

• The computer hangs after installing XP Service Pack 3. I have an AMD Athlon 64 processor. Should what precautions I take before installing XP 3?

  I have an AMD Athlon 64 processor and have tried to install XP Service Pack 3 twice. After installation, my computer crashed and required a system restore. How can I install XP 3 without crashing?

  Steps to take before installing XP SP3:

  http://support.Microsoft.com/kb/950717

  XP SP3 FAQ "s".

  http://www.winsupersite.com/article/faqtip/Windows-XP-Service-Pack-3-FAQ

  Hope these helps.

• Win7 64-bit. After you have installed the MSRT tool my computer hangs at 0% when downloading updates...

  Hello

  I had my computer since Christmas and it has been updated very well, but the last update that it successfully was the removal of software malicious one.  Now there's a criticism published Jan 12 security update that will not update.  Once you click on install updates, it crashes just 05 full.  I left for 12 hours at atime.  It never changes.  I have treid update with the optional updates 3 there and no joy.  Once I got the error code 80240016.  I tried to stop and restart the update service in the command prompt and it said: the service could not be stopped.

  
  

  If I lacked nay info and you think you can help please ask.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  See the section "How to get help" of http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer?

  No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer? Have tried many times, keeps on coming it was not installed.

  See the RESPONSE of two 2 messages in this thread-online http://answers.microsoft.com/thread/0deeacb6-115c-419d-ac37-03ff8927b79c

  Tip: Start with Christian script execution.

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• Cannot start after effects CC 2015 or first CC 2015 after installing the latest updates?

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Hi Shawn,

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Update for Premiere Pro CC 2015 (9.2) and after effects CC 2015 (13.7) for a fix.

  Thank you
  Kevin

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.