The connection data storage series

Similar Questions

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• LabVIEW allows you to sort the raw data of series

  I have an FPGA that is programmed to dump all its bytes of memory containing the tensions, currents, temperature etc. when a serial is estabilished with LabVIEW.

  I know how to connect in series, check all the bytes in the serial port and read the data to the serial port (using VISA).

  What I have to do now is so through what is currently playing.

  If it's reading the data in a sequence of 24 (16-bit) integers sent with the least significant bit first. I need to sort each integer and display in decimal form. How can I do this?

  sout23 wrote:

  How to actually extract each individual value. For example, the first value would be Vout second wine, etc and I want to display each value separately?

  I would do something like that.

  

• Understand the marker data storage

  If I import a camera in project source element and give him some pointers, how do I get these markers to stay with the clip as well as if (months) later if I import this camera clip media source file in project B, the markers that I previously applied appear?

  Where is this marker information stored?

  Is there a correct workflow to ensure that it is still the case?

  Thank you

  MtD

  No official documentation that I can find. If you Google ' first 'element marks' xmp ', you will get some shots that could be instructive.

• How to get the ip address of the data storage device

  Hi all

  I developed a project now and you need to distinguish a virtual machine is saved to the device local ESX or remote network storage device.

  I found the data store object in which the virtual machine resides by vi sdk, but could not find the address of the device that includes this data store.

  How to get the ip address of the coding data storage device, which includes the virtual machine? I need your help.

  Thank you in advance.

  How do you try to make a query. Storage devices provides a logic unit number no, there is no IP address for it.

  You can check the same for the storage on vCenter view

• error 2558 with open data storage express vi.

  I have the appropriate Tektronix installed plugin and when I use the Open Data Storage Express to create new vi *. WFM file I get error-2558 indicating that my system does not have the software installed to support the file type. I use the 2015 SP1 version. Anyone else see this problem? What am I mising here?

  I can't find an easy way or direct to do. There may be a way to convert a file that is saved in a different format if you can find (or create) a file converter. What is your ultimate goal for writing a. WFM file? This will be used by a device that only recognizes. WFM files?

• Rejected... We found that your application does not follow guidelines iOS of data storage,

  Where and how can I fix it?

  We found that your application does not follow the guidelines data storage iOS , which is required by the App Store Review Guidelines .

  
  

  In particular, we found that of the launch or download content, your application stores 3.54 MB. To check the amount of data is to store your application:

  
  

  -Install and run your application

  -Go to settings > iCloud > storage and backup > storage management

  -If necessary, press "view all applications.

  -Control the storage of your application

  
  

  The iOS data storage guidelines that only content that the user creates using your application, for example, documents, new files, changes, etc., must be backed up by iCloud.

  
  

  Temporary files used by your application must only be stored in the directory/tmp. don't forget to delete the files stored in this location when the user quits the application.

  Data that can be re-created, but must persist for proper functioning of your app - or because customers expect it to be available for offline use - must be marked with the "do not back upward" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the backup of the file. For CFURLRef objects, use the kCFURLIsExcludedFromBackupKey attribute.

  You submit an application kiosk, right? This error is still under investigation, but the current solution is to create SD (1024 x 768/768 x 1024) coverage of the images for your renderings folio HD (2048 x 1536) and try again.

  More info here:

  http://forums.Adobe.com/message/4730637#4730637

• How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  Hello

  Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• path of the file to open data storage

  Hi all!

  Now I am using open data storage blocks, write data and data storage to store and retrieve data from result nearby. For the issue of file path, before I

  Set the path of data by double clicking on the block 'open data storage' and inserting the location of the file in the indicated place, and it worked!

  Now since I made a stand-alone application of this program and use it on other computers, the location of the file that I inserted in the block of open data storage is not

  no more valid in the other PC. So I modified my source code by connecting a 'journey of the current vi' to the node of the file path of the open instead of data storage block

  insert inside the block and this does not work! During the race he displays an error in the data writing block saying that the refnum of storage is not valid!

  I wonder why I couldn't specify the path of the file like this. Kind to allow me to specify the path of the file in the path of the vi?

  Thank you!

  Chao

  You need to account for that path changes when integre integrated application, take a look at this example.

  https://decibel.NI.com/content/docs/doc-4212

• "Storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "

  I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point.  Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "  There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">

  Hi rebick,.

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  • When was the last time it worked?
  • Remember to make changes to the computer recently?

  First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above does not resolve the issue, I would say that you create a new user on the computer account.

  Log on to the new user account and check if you can create a system restore point.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one embedded data storage device HP series 7300

  A printer HP 7300 Series contains an embedded data storage device? If so, this is where and how you disable it?

  Hello

  No, there no on-board storage device such as a HARD disk:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=391181&prodTypeId=18972&ObjectID=c00216799

  It has a card reader (right side) and the internal RAM. Disbabling RAM that the printer may not work at all.

  Kind regards.

• Series Qosmio X 870 - who knows the launch date

  Hey guys,.

  No one knows the actual launch date of the X 870 Series br?
  I found that it was supposed to be in June, but the series is not found - got it no stores or it is present on the official website of Toshiba - only the old x 770 series.

  Thank you!

  Hello

  The PSPLXE Qosmio X 870 series is already available in Europe:
  http://EU.computers.Toshiba-Europe.com/innovation/series/Qosmio-X870-series/1122167/

  I have found a few online merchants who provide the Qosmio X 870-124

• Unable to connect data Explorer to the server InsightCM

  Installed InsightCM without error, connected to the cRIO-9048 and collecting data.  -machine x.x.x.2

  Data Explorer installed without error - machine x.x.x.3 InsightCM

  When to launch Data Explorer get a very bland pop error - up 'impossible to connect to the server of CM OR insight on ' - host name is the host of x.x.x.2.

  A. I executed the following this link http://zone.ni.com/reference/en-XX/help/374419A-01/cmanlsmain/server_connect/

  1. Ask a server administrator to check that NEITHER InsightCM Server is running.
  
  
  2. Make sure that you are connected to a Windows account with permission to access the server directories where NI InsightCM Server stores data files. To check this, ask a server administrator for the location of the network data files, and then try to navigate there in Windows Explorer.
  
  
  3. Ask a server administrator if the NI DataFinder server is running. If the DataFinder server is not running as a service, or if the credentials for the run as service at expiration, the DataFinder server stops and the data Explorer cannot connect.
  
  
  4. If an error indicates that the provision of the equipment is not configured, ask a server administrator to set the page of material available in the Systems Manager.

  B. I checked all the obvious places.

  1. low firewalls completely on the two hosts

  2. network connectivity between two hosts

  3 netstat - na | find "6342' on the hote.2 - it is listening.

  4. ...

  Looking for suggestions on how to troubleshoot (or point out something obvious, if I missed).

  Just need a log file or track of something with a little more substance other than the pop-up.

  Any suggestions are appreciated.

  Thank you

  Danny,

  I reinstalled as an administrator and can now connect to the server InsightCM.

  Thanks for the help and for the additional steps on how to ensure that the registration process is complete.

  Appreciate the prompt response.

  Thank you

  -Beck

• The irregular sample in PDM data storage

  I have a request where I capture data (DAQmx) waveform of several cards of analog interface as I am data capture irregularly timed to an Ethernet network.

  The irregular data comes in as an array of values from layer to about 250 Hz with each sample set precisely time-stamped.  Synchronization between the sample is so important so that these data cannot be stored as a waveform.  It should be kept as an array of pairs of channels/timestamp or timestamp value / (array of string values).

  DAQmx data, of course, are given waveform with only the timestamp and necessary delta departure.

  Then, there are suggestions of popular community (recommended ways) of:

  1. Set a TDMS file for irregular data
  
  
  2. Create a single TDMS file for irregular data and DAQmx waveform data in a common format

  Thank you

  XL600

  In this case I used my first string be 'Time' and it is stored as an array of timestamps, where every hour is a value on this index to another channel.  There is a function in the LabVIEW on waveform palette which will take a waveform and generate all the times associated with the values Y.

  Oh and so I usually have a new group for each sampling frequency, then you might have DAQ as a group at a rate that is regular, and there a Time column, and another group might be called the series that has a column of data and time to a non-regular rate.