error 2558 with open data storage express vi.

Similar Questions

• path of the file to open data storage

  Hi all!

  Now I am using open data storage blocks, write data and data storage to store and retrieve data from result nearby. For the issue of file path, before I

  Set the path of data by double clicking on the block 'open data storage' and inserting the location of the file in the indicated place, and it worked!

  Now since I made a stand-alone application of this program and use it on other computers, the location of the file that I inserted in the block of open data storage is not

  no more valid in the other PC. So I modified my source code by connecting a 'journey of the current vi' to the node of the file path of the open instead of data storage block

  insert inside the block and this does not work! During the race he displays an error in the data writing block saying that the refnum of storage is not valid!

  I wonder why I couldn't specify the path of the file like this. Kind to allow me to specify the path of the file in the path of the vi?

  Thank you!

  Chao

  You need to account for that path changes when integre integrated application, take a look at this example.

  https://decibel.NI.com/content/docs/doc-4212

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Storage Vmotion with separate data storage drives

  I have a virtual machine that has 3 virtual drives.  Two of them are in a single database, the third on another store.  It was actually added to this machine virtual from a virtual machine crashed, so its stored in a different folder as well.

  What happens if I have storage vmotion this client vsphere guest?  It move all disks and consolidate them in the vault, I chose?

  I've searched the forums, but couldn't find this scenario.  Sorry if this has been asked before I'm sure it is.

  Billy

  Yes that's correct.

• Receive error message when calculating the two fields with different date format

  I'm more familiar with SQL Server and Oracle, then after a search online without success, I ask here.

  I use developer PL/SQL with DB Oracle 11g Release 11.2.0.2.0 Enterprise 64-bit

  MyTable:

  ID_Number VarChar2

  Date of Date_Received

  Select ID_Number,

  Date_Received,

  To_Date (substr (ID_Number, 1.6), "YYMMDD") SentDate,.

  Date_Received - NumDays To_Date (substr (ID_Number, 1.6), "YYMMDD")

  FROM MyTable

  Where substr (ID_Number, 7.3) in ('ABC', 'ABD')

  and length (Trim (translate ((substr (ID_Number, 1,6)), '0123456789',' '))) a null value

  ID_Number Date_Received SentDate NumDays

  131002ABC1654106 10/16/10/2013-2013 14 2

  131004ABD8813899 4/12/2013-4/8/2013 4

  131014ABD1844832 10/16/10/14 OF 2013-2013 2

  Sometimes the first 6 characters in the ID_Number aren't the numbers and length (Trim (translate deletes records))

  I want just the records where NumDays > 2

  I tried to put the request in a subquery and using where NumDays > 2 outside.  I also tried using the calculation directly in the Where clause.  Without it in Where clause it works very well, with him in a place, I get the following error:

  ORA-01931: Date format picture ends before converting all of the input string

  
  

  I don't know how to put the two dates in the same format.  I tried to declare the format without result.  I don't understand how I can calculate in the selection, but do not use the same calculation in Where clause.

  Thank you for your help.

  Hello

  SQL is a language to describe the desired results.  How the system gets these results belongs to you don't have much say about which conditions will be applied when.

  One place where you can control the order of things is a CASE expression.  When you say

  CASE

  WHEN condition_1

  THEN expression_1

  END

  You can be sure that expression_1 will be evaluated only when cond_1 is set to TRUE.

  Try something like this:

  WITH got_sent_date AS

  (

  SELECT id_number, date_received

  CASE

  WHEN the TRANSLATION (SUBSTR (id_number, 1, 6)

  , 'x' 0123456789 '.

  , 'x'

  ) IS NULL

  THEN TO_DATE (SUBSTR (id_number, 1-6)

  , "YYMMDD".

  )

  END AS sent_date

  FROM MyTable

  WHERE (id_number, 7, 3) SUBSTR ("ABC", "ABD")

  )

  SELECT id_number

  date_received

  sent_date

  , date_received - sent_date AS num_days

  OF got_sent_date

  WHERE date_received > sent_date + 2

  ;

  If you would care to post some sample data (CREATE TABLE and INSERT statements) and the results desired from this data, I was able to test this.

  Of course, you'll still errors of execution if id_number starts with 6 digits, but they do not have to be valid, for example '131100' or '130229'.  This is one of the reasons why the date information storage in VARCHAR2 columns are a bad idea.  To work around this problem, see

  https://forums.Oracle.com/message/4255051

• I want to buy a flash with lightning connector data storage.

  I want to buy a flash with lightning connector data storage.

  I'm between Transcend JetDrive™ Go 500 and iXpand SanDisk Flash Drive.

  What do you suggest me? Do you have another?

  My first priority is speed and iOS app use of data transfer.

  Hello

  To get the advice of a large sample of existing users of each product, you could more usefully read ratings on Amazon.com and reviews of products.

  If your questions are not answered there, you can also post a question of your choice.

• receive the error message with every new open tab

  Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

  At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

  There are two error messages which read:

  [JavaScript application]
  evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass.

  [JavaScript application]
  Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  So I clicked on help > troubleshooting information and choose Reset Firefox.
  Now I get a new error message with every new tab open.

  [JavaScript application]
  Error: syntax error

  Please tell us how to do this.
  Thank you
  JudyLeeThurber

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url
  4. Double click on the first result, a new window should now display.
  5. Type of topic: newtab in the area.
  6. Click ok and load a new tab. It now works of mireille?

• Documents and data with all the storage on iPhone

  A few days ago I tried to send an email with a large attachment. However, it has not been send so I deleted my account from my iPhone. Once I did, I got a message saying that almost all of my storage has been exhausted. I checked to see and I have about 5 GB of available 64 GB. I connected my iPhone to my computer to check which took all this space and 45 GB of my space is being taken up by the Documents and data. I deleted the old messages, imported pictures to my computer and erased, erase my history on safari, check on iCloud, and allows to remove most of my apps that I have read that the removing applications and later re - download. I've also updated to iOS 9.3. It helped very little. Documents and data is now only 43 GB instead of 45 GB. Before that happened, I got about 50 GB of free and now I just 5 GB free after it happened.

  What else can I do to clear more of Documents and data? Should I restore my iPhone to one of the backups that I recorded? Should I take my iPhone at the Apple Store because it happened so suddenly and randomly?

  On the phone, go to settings App > general > storage & use iCloud > manage storage (in STORAGE). Who will provide a list of what applications use data and in what quantity. Tapping on the app with you give the amount of data, the application contains (less himself) and in most cases the ability to delete the application, if you wish. You will not necessarily have to delete the app.

  Once you have completed all the actions, try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, actually iTunes sync erases some of this possibility.

  One last thing, if you have installed whatsapp, there is a known problem cases that it runs in fairly large amount of data storage.

• Data storage 3.5 "Toshiba Canvio problem with permanent fade.

  Since I started using the Toshiba Canvio 3 TB 3.5 "external data storige disc he found himself a strange faul which makes it difficult to use.

  Data storage, for example when I use it to watch a video file off and then it start immediately again to go back... It can happen to the breast of a movie 20 times and it is very annoying because you never know when the judgment will happen...

  How to fix this please?

  Hello

  In my opinion it is not very easy to say why the external HARD disk automatically turns off while watching a movie. But this issue does not seem that there might be something wrong with the settings or software.
  Of course, some tools are available and installed on the HARD drive as the NTI Backup Now EZ software but I n t think that this could affect the playback of the movie. However, this software supports and automatic backup function and you can change how often your backup intervenes (hourly, daily, weekly, etc.). So try to disable this setting for testing purposes.

  Fact is that this 3.5 HARD drive must be connected to a power adapter and HARD drive supports the USB 3.0 interface but it s backward compatible with USB 2.0.

  I put t know what are the USB ports you have used for the connection of HARD drive, but I recommend you test all the USB ports taken in charge by the PC.

  Last but not least, it could be possible that there is a hardware problem simple HARD drive

• Opening of attachments with a dat extension

  Windows Mail - can NOT OPEN parts JOINED WITH the DAT EXTENSION.

  Windows Mail - can NOT OPEN parts JOINED WITH the DAT EXTENSION.

  the .dat files are used by programmers to store data.
  Suggest that you inform the sender to avoid sending attachments in formats of .dat files.
  Meanwhile, save it on your computer...
  1.) If you have Excel, see if you have a bit of luck to open it in Excel.
  2.) If you know it's an accessory photo, save the attachment already saved and change the type of file in png or jpg format.  If you know that it is a document, then chabge it in .doc format.

  This is an interesting online Extractor. Check it out.
  Viewer online winmail.dat attachments:
  http://www.winmaildat.com/

  t-4-2

• How to open .dat WP51 with Vista?

  I have Windows Vista, and it should be up to date.

  I need to access two WP51 documents that were sent to me.  We got a .dat extension, and the other has an extension .read.

  I was prompted to "set associations...". "but when I went to the appropriate place to do this, nor read extensions or .dat generated on the long list of extensions on the page"associate a file type... ". ».

  It is essential that I have access to these documents.  I can't find anything when I googled "How to open .dat wp51" (except odd links to pages of pirate...)

  If anyone can help, I'd appreciate it.  Please keep your instructions as lay people as possible.

  Hi AnnieElle,

  Looks like there are two parts to your question:

  (1) open a file read:

  Just to clarify, you have tried to open the file read extension in a text file? (Opening the .dat file perfect word would fail to open as a .txt file)

  (2) open a WordPerfect file with .dat extension:

  Basically, the idea would be to open the file in WordPerfect or open it in a word perfect reader. It would be really better to know which version of this file may have been because they have different extensions depending on the version of Word Perfect.

  Reference (for more information on what file extension fit the WP version the .dat file came from):

  http://en.Wikipedia.org/wiki/WordPerfect

  How do you get the file to read at this point would be to change to the extension of the WP program it has been generated to go and then open the form in WordPerfect format or Word Perfect player. For example, to change the .dat by .wp extension and open it.

  If it does not, the file is of a type, we cannot recognize or likely unreadable or corrupted.

  Hope this helps,

  Steve <> Microsoft Partner

• I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable

  I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable. Sometimes, reinstall drive. I do not have the windows CD. Can I download the original Windows on android phone and the transfer

  You can download and create a bootable copy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?tab=question&status=unanswered

  then

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• Getting started with Open manage the essential problem of Server Data Sources

  I installed a server for and with Open Manage Server Essentials... discovered my network and found a lot of good servers... 1 server has a green check mark and you can see in the Data Source, it uses the administrator of the server with the Version 7.1.0. I downloaded the OMSA node in 7.4.0.2 on another server, etc. SNMP installed and the server is located with a gray question mark and the data source is an Agent of Version 2.0 of Windows Hardware... is anyone has any advice how to handle? And want to install server after the server to see it in OME centrally on a single management server...

  Sorry for my bad English and thanks for all the info.

  Thomas

  OK, so make sure you check out the first installation tutorial in the console of the OME.

  1. you must on the box, so 7.4 OMSA's fine.

  2. be sure that you did the necessary SNMP parameters in the box of the OMSA (services.msc, SNMP, accept any host paackets - or use the ip address).

  3. you can use the tool for troubleshooting Dell desktop OME to test SNMP connectivity to the server with OMSA on it.

  4. I think that the FAQ (delltechcenter.com/ome) contains some tips in the discovery section (3.4)?

  That should make us started.

  Thank you

  Rob

• Error: The lines of data with unmapped dimensions exist for period "1 April 2014".

  Expert Hi

  The below error when I click on the button Execute in order to load data in the area of data loading in 11.1.2.3 workspace. Actually, I already put in the tabs global mapping (add records of 12 months), mapping of Application (add records of 12 months) and map sources (add a month "1 April 2014' as the name of period with Type = Explicit mapping") in the service of the period mapping. What else should I check to fix this? Thank you.

  2014-04-29 06:10:35, 624 [AIF] INFO: beginning of the process FDMEE, process ID: 56
  2014-04-29 06:10:35, 625 [AIF] INFO: recording of the FDMEE level: 4
  2014-04-29 06:10:35, 625 [AIF] INFO: FDMEE log file: null\outbox\logs\AAES_56.log
  2014-04-29 06:10:35, 625 [AIF] INFO: user: admin
  2014-04-29 06:10:35, 625 [AIF] INFO: place: AAESLocation (Partitionkey:2)
  2014-04-29 06:10:35, 626 [AIF] INFO: period name: Apr 1, 2014 (period key: 4/1/14-12:00 AM)
  2014-04-29 06:10:35, 627 [AIF] INFO: category name: AAESGCM (category key: 2)
  2014-04-29 06:10:35, 627 [AIF] INFO: name rule: AAESDLR (rule ID:7)
  2014-04-29 06:10:37, 504 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)
  [JRockit (R) Oracle (Oracle Corporation)]
  2014-04-29 06:10:37, 504 [AIF] INFO: Java platform: java1.6.0_37
  2014-04-29 06:10:39, 364 INFO [AIF]: - START IMPORT STEP -
  2014-04-29 06:10:45, 727 INFO [AIF]:
  Import of Source data for the period "1 April 2014".
  2014-04-29 06:10:45, 742 INFO [AIF]:
  Import data from Source for the book "ABC_LEDGER".
  2014-04-29 06:10:45, 765 INFO [AIF]: monetary data lines imported from Source: 12
  2014-04-29 06:10:45, 783 [AIF] INFO: Total of lines of data from the Source: 12
  2014-04-29 06:10:46, 270 INFO [AIF]:
  Map data for period "1 April 2014".
  2014-04-29 06:10:46, 277 [AIF] INFO:
  Treatment of the column mappings 'ACCOUNT '.
  2014-04-29 06:10:46, 280 INFO [AIF]: data rows updated EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 280 INFO [AIF]:
  Treatment of the "ENTITY" column mappings
  2014-04-29 06:10:46, 281 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 281 [AIF] INFO:
  Treatment of the column mappings "UD1.
  2014-04-29 06:10:46, 282 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 282 [AIF] INFO:
  Treatment of the column mappings "node2".
  2014-04-29 06:10:46, 283 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 312 [AIF] INFO:
  Scene for period data "1 April 2014".
  2014-04-29 06:10:46, 315 [AIF] INFO: number of deleted lines of TDATAMAPSEG: 171
  2014-04-29 06:10:46, 321 [AIF] INFO: number of lines inserted in TDATAMAPSEG: 171
  2014-04-29 06:10:46, INFO 324 [AIF]: number of deleted lines of TDATAMAP_T: 171
  2014-04-29 06:10:46, 325 [AIF] INFO: number of deleted lines of TDATASEG: 12
  2014-04-29 06:10:46, 331 [AIF] INFO: number of lines inserted in TDATASEG: 12
  2014-04-29 06:10:46, 332 [AIF] INFO: number of deleted lines of TDATASEG_T: 12
  2014-04-29 06:10:46, 366 [AIF] INFO: - END IMPORT STEP -
  2014-04-29 06:10:46, 408 [AIF] INFO: - START NEXT STEP -
  2014-04-29 06:10:46, 462 [AIF] INFO:
  Validate the data maps for the period "1 April 2014".
  2014-04-29 06:10:46, 473 INFO [AIF]: data rows marked as invalid: 12
  2014-04-29 06:10:46, ERROR 473 [AIF]: error: the lines of data with unmapped dimensions exist for period "1 April 2014".
  2014-04-29 06:10:46, 476 [AIF] INFO: Total lines of data available for export to the target: 0
  2014-04-29 06:10:46, 478 FATAL [AIF]: error in CommMap.validateData
  Traceback (most recent call changed):
  Folder "< string >", line 2348 in validateData
  RuntimeError: [u "error: the lines of data with unmapped dimensions exist for period" 1 April 2014' ""]

  2014-04-29 06:10:46, 551 FATAL [AIF]: COMM error validating data
  2014-04-29 06:10:46, 556 INFO [AIF]: end process FDMEE, process ID: 56

  Thanks to all you guys

  This problem is solved after I maped all dimensions in order of loading the data. I traced only Entity, account, Custom1 and Custom2 at first because there is no source map Custom3, Custom4 and PIC. After doing the mapping for Custom3, Custom4 and PKI, the problem is resolved. This is why all dimensions should be mapped here.