HP Pavilion g6t - 1 d 00: cannot find command of Kit Recovery Option

Similar Questions

• HP Pavilion g6t - 1 d 00: cannot find the Ethernet drivers

  I have a HP Pavilion g6t - 1 d 00 Mobile (product #-A1J17AV;) Series # 5CG217015R) with Windows 7. The operating system has crashed so I reinstalled a fresh copy of Windows 7 (64-bit) on my computer.

  The HP support site is not all the drivers for the Ethernet wired network adater. The Device Manager has the Ethernet controller, PCI Device, network controller and peripheral other SM Bus controller listed under, and he says there is no driver installed for these devices.

  In addition, all the other drivers on the HP support site are for Windows 8, nothing for windows 7. I tried to install the wireless broadcom and intel drivers (I don't know which one I have), but they no longer work.

  Could you please tell me where I can get the correct drivers?

  Thank you.

  Neel

  Hello:

  Here are the drivers you need for the:

  SM Bus controller: Install first this driver and restart the PC.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp55095.exe

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55040.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55038.exe

  Since your computer laptop is a CTO model, there may be several different model wireless cards which might have been installed on your PC.

  Please view the ID of the hardware for the network controller (which is the wireless card needing a driver).

  To find the hardware ID, click on the network controller device in Device Manager.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the item at the 2nd (hardware ID).

  After the first string of characters you see in the window.

  Also, here is the link to the page of the W7 driver for your laptop.  It has all the drivers and the software you need except for the controller driver smbus I have a template with similar equipment.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1D00-notebook-PC-series/5186811/model/5214422

• BlackBerry Smartphones BB Bold 9930 cannot find the battery under device options saving Mode

  I have a BB Bold 9930 with OS v7.1.0.163 and I can't find the battery under device options saving Mode. I was told that I needed to update my device to a newer version, after around .3xx software do not know that. But when I try to update my device through BlackBerry Web page software or Office Manager, they both tell me that my device software is up-to-date. How can I update my device software to a newer version on OS 7.1?

  OK, I thought that you must have some higher than 7.1.0.342 BONES to get the battery in watch mode on your output device. Apparently Viva has not published a more recent OS you already have.

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  See the link below to download it and follow these simple instructions.

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=C6BFF625BDB0393992C9D4DB0C6B...

  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  Note: Some users may be concerned they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Please read more information about it here: http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html

  BlackBerry Handheld Software v7.1.0.1189 (Multilingual)

  Package Version: 7.1.0.1189
  Composed of:

  • Applications: 7.1.0.355
  • Software platform: 5.1.0.288
  • File name: 9930AMEA_PBr7.1.0_rel1189_PL5.1.0.288_A7.1.0.355_C _Spire_Wireless.exe
  • File size: 207,62 MB

• HP Pavilion g6-1322se Notebook: [SOLVED] cannot find/install the appropriate network controller driver

  Hello

  I installed Windows 7 64 bit as a SECOND OS on my laptop, everything goes very well with Windows 10 a.

  On Windows 7, the Netowrk controller driver is missing and I can not connect to Internet via Wifi.

  I manage to find a suitable driver for my network controller (don't know if it's Broadcom and Realtek).

  I tried to install a large number of them, and finally, it fails with the error:

  ["0" error and the installation program cannot contiune]

  Product name:

  Laptop HP Pavilion G6-1322se

  Hardware ID:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Any suggestions?

  Concerning

  Hello world

  I found a solution for this. I downloaded the driver appropriate from this link:

  http://support.HP.com/my-en/drivers/selfservice/swdetails/HP-Pavilion-G6-1300-notebook-PC-series/5186808/model/5218300/swItemId/ob-95652-2

  After extraction, it will start the installation, and the error appears again. Nevertheless, follow these steps after the error:

  1. Locate the file extraction. [You can see address during extraction after clicking on the downloaded file.]

  2. go to the Device Manager, right-click on the network controller and click Update driver software.

  3. choose to do it manually. Find the folder of extraction [I mentioned earlier].

  4. made!

  * Do not forget that, in order to get the best driver, you should IDENTIFY YOUR PRODUCTS AUTOMATICALLY by the HP Web site and then go to its pilots!

  Concerning

• Pavilion dv7 - 1247cl - network controller - cannot find a driver for it

  I have wireless on my Pavilion dv7 - 1247cl.  HP wireless Assistant says its disabled in Device Manager and the 'network controller' is disabled.  So I guess that's my wireless card?  I can't find a driver to allow him.  I tried the Broadcom and Atheros drivers and none worked.  I do not know what card is installed and there is nothing to identify what I can see in the Details tab in Device Manager.  Any help would be greatly appreciated.

  I am running Windows Vista 32 bit.

  Hello:

  I looked at the model of wireless card that your laptop has from the list of parts, and it is the driver, that he needs.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

• HP Pavilion 23g a pc while: cannot find my webcam on my hp all in one 23 pc g

  I can't seem to locate and activate my webcam on my new hp all in pc

  How to get to use this webcam and or the camera of my screen?

  Help, please

  OK test

• How do to change the Mouse/touchpad options Aspire E5 (521-610p)? Cannot find beyond the base pointer options.

  Just a new Aspire E5 for my girlfriend and can't see how to change the options of touchpad (for example, sensitivity, scroll to settings, etc). On my V3 571 G acer from the base of the mouse options I can go in "momentum" to change various options but do not seem to have (or cannot be found) this option on the new E5... any advice. I'm sure it's something obvious that I'm missing.

  If there is I have yet to discover, I was looking for other options for about a month myself, now. Synptic precision touchpad, unlike elan touchpad, looks more like a MacBook touchpad with native gestures and the integration of the OS.

• Cannot find OS in system recovery mode

  Try to repair/recover my laptop ASUS F5R running Vista Home Basic.

  When I try to start, I get the message "BOOTMGR is missing".

  The recovery of Microsoft disk, I downloaded does not work - I get to the part where he seeks the OS but can't find it. I then get isntructed to load for disk drivers hard but don't know which file it is from the utility disc.

  ASUS technical support were not much help.

  There is no free legal copy available for download.  You will need to find someone with the drive and take long enough to do the installation.  Otherwise if the manufacturer won't help you with the recovery Partition or recovery discs (and they should) then you need to replace the software.  Frankly, if the didks of recovery do not work, I'm not sure that an Installation of Vista genuine disc will do better.  You may have a bad hard drive (or other hardware) which must be repaired or replaced (in which case you will need to take to a reputable computer shop for Diagnostics repair and repair)-despite the ability to install other operating systems and make them function.

  Here is Microsoft's policy on replacement software: http://support.microsoft.com/kb/326246.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion running Vista system crashes then it said 'cannot find Windows.

  I have a HP Pavilion otherwise very satisfied with Vista and installed Service Pack 2. Lately, unfortunately, the machine often accidents / crashes. Sometimes, the problem is resolved after you restart Windows. But more often, when I try to reboot normally, or via Ctrl/AltDel or removal of complete power, an error message appears back, indicating "cannot find Windows. I think I have a problem of HARD drive and/or a little defective internal power connections. But since I still have a lot of free space on the HARD disk, I prefer not to scrap it. However, if it 's the drive itself that has a problem, I would consider that replace it with a new one. Anyone out there with some thoughts on this?

  Hello

  ·         Since when are you facing this problem?

  ·         What is the code or an exact error message you get?

  ·         Remember to make changes to your computer before this problem occurred?

  Method 1:

  I suggest you to refer to the article below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  I suggest you follow the article from the link provided below and solve the problem:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Hope this helps

• need help... I cannot find ati mobility radeon hd 6470 software for my hp pavilion 1115tx g4

  need help... I cannot find ati mobility radeon hd 6470 software for my hp pavilion 1115tx g4

  Hi Pinpogi,

  The drivers arehere. Select the driver AMD and read the information to ensure that it is for the good installed onboard graphics also.

  Best regards

  ERICO

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• HP Pavilion Notebook - 15-p164: could not find the list of drivers

  I get the message "cannot find the list of drivers for your product.  Since the installation of the driver for my GPU, I get the BSOD "thread stuck in device driver".  I make sure that I have all the correct drivers.  Thank you.

  @Aljoli

  Two systems in this category...

  HP Pavilion Notebook - 15-p164ca (ENERGY STAR)

  and

  HP Pavilion Notebook - 15-p164nr (ENERGY STAR)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Ran repair and now recovery cannot find the OS to fix it.

  Damaged operating system.  Ran repair and now recovery cannot find the OS to fix it.  When I try the installation option, I get an error message that it can't find install.wim.  Operating system has been installed on a HP Pavilion a6600f and I have the product key, just not Vista 64 bit to enable more.

  * original title - corrupt OS. Ran repair and now recovery cannot find the OS to fix it. When I try the option to install I get an error message that it cannot locate install.wim*

  Hi agc409,

  Please see the following HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=IE&DocName=c00881405

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think