The CRA editor - Convert String in full

Similar Questions

• How to convert string to datetime in the transformation of the Ombudsman

  Hello

  I am getting error below when inserting the data in the database using the database.

  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: DBWriteInteractionSpec Execute Failed Exception." insertion failed. The descriptor name: [InsertPayload.XxohInsertStgTable]. Created by Exception [EclipseLink-3001] (Eclipse - 2.3.1.v20111018 persistence Services - r10243): org.eclipse.persistence.exceptions.ConversionException Description of the Exception: object [2015-09-14 15:19:51], class [class java.lang.String], couldn't be converted [class java.sql.Timestamp]. Inner exception: LINK. JCA-11636 couldn't convert Timestamp Exception. Cannot convert a string value in the xml file to a java.sql.Timestamp. Although the databases accept strings representing the timestamps in a variety of formats, the adapter only accepts strings that represent xml ISO dateTime format. The input value must be in the format XS: DateTime to iso 8601, i.e. YYYY-MM - DDTHH:MM:SS.sss - 07:00. Please see the logs

  In the transformation of the mediator, the Source element is a string

  < xs: element name = "CREATED_DATE" type = "xs: String" > < / xs: element >

  Target is of type dateTime

  < xs: element name = "Creation_Date" type = "xs: DateTime" minOccurs = "0" nillable = "true" / >

  To avoid the above error, I used < xsl: value-of select ='xp20:format - dateTime (/CREATED_DATE, "[Y0001]-[M01]-[D01] [H01]: [m01]: [s01]")'/ > in the transformation, but its does not work. The value is blank display after processing.

  Please suggest me how to solve this problem.

  Thank you

  Sunita

  Unfortunately, the format required by the dateTime format is YYYY-MM - DDTHH:MM:SS.sss

  You can use the substring, and on the entry's concat function to create YYYY-MM - DDTHH:MM:SS.sss

  See formatting string to date in BPEL

• Convert the object to a string

  Hey guys - I'm beating my head against the wall on this workflow I have been working on for a week and I was wondering if anyone can point me in the right direction.  Trying to figure out how to take the entry (VC:VirtualMachine) for an item in the workflow and convert it to a string (hostNameOrIP) to be used for the next item in the same workflow.

  Here's a bit of context:

  The global workflow is the copy of the file to the workflow comments followed by run a workflow of SSH in command.  The copy of the file to the comments using a parameter such as VC:VirtualMachine; However, I like to wear this VM name in the next part of the workflow but the command run SSH wants to format as a string.  It sounds stupidly simple, but I am challenging my brain on it.   Joined logic available to the workflow - I wonder if I need a scriptable between the workflow task two elements / nested that performs the conversion or is it possible to have the first nested workflow, the name as a string of output and then use an output for an entry?

  Yes, you need to set a variable.  It could be an output of your workflow or a script task, as you say somewhere in your workflow.  If your vm is named to match the host name, you can use something like vmName var = vm.name;  If you want to use the real host name or ip address, you must enter the vm.guest.hostName or vm.guest.ipAddress.

• convert the column to a string name

  pls help me.
  
  I need to know how can I convert the column to a string name because I can not insert the column name into my table.
  
  
  for matrix (SELECT nom_de_colonne
  OF all_col_comments@myDBLink
  WHERE UPPER (trim (table_name)) = "ROLEMATRIX")
  loop
  INSERT INTO myTABLE (myColumn)
  VALUES (matrix.column_name);
  end loop;
  
  
  my error:
  ORA-00984: column not allowed here

  which line you are confronted with error, because I've also tested this, his work on my side!

• Easiest way to convert Hex in full

  This problem is mainly to do with a hexadecimal string of full conversion.  The device, connected via a series output in the format 0A 00 hex connection, when he looking at in hexadecimal.  The first two digits correspond to the data, the last two are attached to separate data points.  what I'm trying to do is the last 2 digits of raster off so a 2, 00 becomes 2A and 2 then convert to integer format (42).  I came up with a method to do this, but it's very messy and may result in data loss.  I enclose my vi (8.2).  The large integer being subtracted is a constant that keeps rising for reasons that I'm not aware of.

  Another issue which I am coding via is the fact that sometimes a byte slips by, manufacture of 2-00 become 00BB or something of this format.  Is there a way to parse the string, whether the first two digits or the last two digits are valid and then separate the valid string?  In this code, it would be necessary allow the value 0000 to read 0.

  If there is confusion, here are some examples of data inbound and output desired

  0100 - 1

  A 0, 00-10

  0005 5

  000-11

  etc.

  Since you read 2 bytes, looks like you should be dealing with a 16-bit number. Cataloged to U16 rather I32 like you do now. And all of this manipulation of strings give the impression that you have found a string of ASCII characters in the format like '0' 'A' '1' 'B' rather than a string of 2 bytes of ASCII characters 0 and 1 b. Then you can divide the number of U16 and take the higher order byte.

  I can't explain why you would be having a byte per except slip if she has something to do with all this manipulation of strings you're trying to do.  But if it happens again, and you know a byte for each other are always zero.  Just take the high byte and add it to the low byte.  Since one is zero, it has no effect on the other octets.

  

• How can I convert String type to a Type of BinaryEntry?

  We must differentiate between the keys that come to the custom editor Erase method. So, we have added ' | ' at the end of the key as below
  
  key = "a"; Actual key which is cached
  
  If (//some condition)
  {
  newKey = "a" | newKey to differntiate
  getCache () .remove (newKey);
  }
  on the other
  getCache () .remove (key);
  
  Now, the call comes to our custom editor Erase method. Here, we must perform a different operation of the key which has ' | ' in there. So, we have added below code in the custom Erase method.
  
  public void clear (BinaryEntry binEntry)
  {
  Key of type string = (String) binEntry.getKey ();
  If (Key.Contains("|"))
  {
  You will need to do a DB here. Then,
  now, the key is "a |" We need to eliminate the "|" symbol and call the Delete method to delete the current key ('a') of the cache. So we added code below
  
  Replace string newKey = (nom_domaine_dns) ("|", "");
  
  Here, the problem is, key is of type String. But Erase method can take only BinaryEntry type. So, we tried this
  
  binEntry = (BinaryEntry) (binEntry.getContext () .getKeyToInternalConverter () .convert (key));
  
  Super.Erase (binEntry); but it dint work. The entry is not deleted from the Cache.
  
  How to convert key to type the string to BinaryEntry?
  
  }
  on the other
  {
  Super.Erase (binEntry);
  }
  }
  
  
  Can anyone suggest?

  Hello

  Yes, JK is right! I forgot that the remove() will remove the entry from the BackingMap. Another alternative would be to use the EP below:

  public class EP2 extends AbstractProcessor implements Serializable{
       private boolean isSynthetic;
  
       public EP2(boolean bln){
            this.isSynthetic=bln;
       }
       @Override
       public Object process(Entry entry) {
            BinaryEntry binEntry = (BinaryEntry) entry;
            if (isSynthetic){
                 //Synthetic Remove                    
  
                 // This is a bug and should evict entry and not call erase
                 //binEntry.remove(isSynthetic);   
  
                 //Alternative solution is to expire with a minimum delay of 1 ms
                 //This will call the store method so make a check of the original and new value and do nothing if they are same to avoid DB update
                          binEntry.expire(1);
  
            }else{
                 //Will hit the cache store
                 entry.remove(isSynthetic);
            }
            return null;
       }
  }
  

  Client side, make a call to delete as below:

  cache.invoke(key, new EP2(true)); // coherence eviction only
  
  cache.invoke(key, new EP2(false)); // for invoking erase()
  

  I hope this helps!

  See you soon,.
  NJ

• How to convert string to number in TS?

  Hello

  Anyone know how to convert string to number in TS?

  I couldn't find the Num() function.

  Thank you

  Val()

• change the format of a string

  Hi all

  Now what I'll do is to convert a string to an array.

  The string I got is shown on the photo as an attachment with my code.

  Of course, the table is not correct.

  I wonder if there is a way to change the format of the string without empty lines and concatenate each number after another.

  in order to have a correct table with my code.

  Or someone has idea to a new code for the conversion of a string like this in the table?

  Thank you

  Chao

  I think they are referring to something like this.

• What is the relationship of synchronization between the input MUX and the clock to convert DAQmx

  My application requires both long settling for the analog input.  I can slow down the clock to convert in order to increase the interval without but I would like to learn more about the internal synchronization and synchronization between the switching of input MUX and the clock to convert.  Data acquisition is USB-6225.

  Thank you

  Neville

  wet'nwild,

  You have reason in the observation that hold all the impulses of the event happening 180ns after convert rising edge clock, regardless of the period of the clock to convert.

  This is the process:

  1. the clock Convert generates an impulse to start the ADC conversion.

  2. a period of time (in your case, 180ns) after the clock pulse to convert, the complete signal hold impulses. This indicates that the data are "required" by the Active Directory Connector. It is now OK for the MUX switch to the next channel. It is important to note that the ADC conversion is not complete when the pulse hold full occurs.

  3. at this stage, the MUX will pass and the device will wait for the next clock pulse to convert for the start of the next conversion.

  In summary, this means that when you change the period to convert clock signal, the complete signal hold flashed always the same fixed amount of time after the edge of signal clock convert. The complete signal Hold'em is not a good indicator of break-in; the width of the period to convert clock must be waiting time indicator (which looks you determined you're previous posts). A good application for the signal keep complete would be for an application where there is an external multiplexer and the multiplexer needs a signal indicating that it is OK to switch the inputs.

  I hope that helps clear up any uncertainty that you have about how it works!

  Kind regards

  Aaron

• convert string to float

  Hello

  I would like to convert string to float. I have a text which float to string contents of the file number.

  for example:

  10,000 2 of. 1.32323 0000 these channels I would like to convert float or double number.

  Help, please!

  I use the string of spreadsheet in table vi and I need to properly adjust the format string.

  %.; %f

  Thank you all!

• Now get the "cannot open converter mswrd632.

  Getting this code on some but not all documents.

  Packerguy,

  Welcome to the Microsoft Answers community.

  To resolve this issue, an affected user can unregister the mswrd632 converter by editing the registry as follows:

  1. click on Start, click run, type regedit, and then click OK.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Text Converters\Import\MSWord6.wpc

  3. in the Edit menu, click delete.

  4. click on Yes.

  5. exit the registry editor.

  This change will actually unregister the converter and disable it for third-party applications and for Microsoft Office. Microsoft Office will use its own text converters to open these types of files.

  Please see more information about a security update 973904 KB .

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manager of the registry editor and the task does not not XP clean install

  Hi all

  I use Windows Xp professional. As soon as I installed Windows I wanted to see 'Task Manager' and 'the registry editor. But I'm not able to open these two applications.

  Whenever I try to run regedit or taskmgr I get this message "task manager / the registry editor" has been blocked by your system administrator.

  I tried a few methods such as downloading a file .vbs script that opens the registry editor and also tried to activate it in the gpedit.msc but I'm still not able to do it properly.

  Can someone help me on this please?

  Enable the Task Manager in Windows XP

  1. start Windows to your habit.

  2. click on 'start '. Then highlight and click on 'run '.

  3. Type "REGEDIT" in the text bar and press "enter."

  4 4 naviguer navigate in the registry, locate the following directory: "HKEY_CURRENT_USER-Software-Microsoft-Windows------CurrentVersion------Policies\ system.»

  5.right click "HKEY_CURRENT_USER", then click on 'New' from the context menu to include a new string. This is necessary only when the necessary directory is not present in the registry. By default, Windows XP Home Edition does not include the necessary directories chain.

  6. click on the part of the sentence "DisableTaskMgr" and delete it. It's the easiest way to do it, but it makes it harder to fix in the future. You will need to manually reenter the chain if you don't back up first.

  7 change the numbers in the Boolean section of the entry from one to zero. This will allow the Task Manager in Windows XP. Note that zero is essentially equivalent to a positive input in this regard, that the original string is a negative.

  8 change the string manually in the window "Run" from the Start Menu, without having to access the registry editor. Just type "REG add HKCU/v DisableTaskMgr /t REG_DWORD /d 0/f" in the text field and press "Enter"...

  Please do the above methods and even if it does not work with these processes then mail me... my mail is * address email is removed from the privacy *. am vijay... waitin 4 your rly... try it & IT... It is easy...

• How can I fix the problems with the registry editor in windows vista?

  My computer has been infected by a virus, and now I can't open the Windows Defender Security Center and Windows Firewall. I used Microsoft Security Essentials scan to remove the virus or virus. Now when I run a full scan it comes up clean, but I still have no firewall. I tried to fix this by using the registry editor. Once I got to the stage when I open the BFE (or any file) I get the message that the registry editor has stopped working. How can I fix it? I already tried the System File Checker, and he is unable to solve the problem. I also tried restore of the system several times without success.

  Try to do the same thing in Mode without failure.

  Steps to start safe mode.

  http://Windows.Microsoft.com/en-in/Windows-Vista/start-your-computer-in-safe-mode

• DB2 connection in the synchronization editor error

  I'm trying to configure a DB2 connection in the synchronization Editor. Even after I provide server, user name & password of the database is not editable:

  

  If I hit "Next", I get the following error, as the database is not specified:

  

  I tried the Extended mode, and specifying the values y. I go to the next screen, but get the following error in the screen "select partial patterns:

  

  I see several instances of the error is Windows Application logs (Event Viewer) from the synchronization Editor while I set up the connection. There are others where Pwd is replaced by Uid or Server:

  (Application 7.0 version 2015-08-23-009) The 'Pwd' property name is not recognized.

  System.ArgumentException: The 'Pwd' property name is not recognized.

  at IBM. Data.DB2.iSeries.iDB2ConnectionStringBuilder.set_Item (Word string key, Object value)

  at VI.CommonDialogs.DbDialogs.ConnectBaseDbControl.SetValue (String key, String value)

  VI. Projector.Database.Native.UI.Controls.ConnectDB2DbControl.txtPassword_TextChanged (Object sender, EventArgs e)

  to System.Windows.Forms.Control.OnTextChanged (ByVal e As EventArgs)

  at System.Windows.Forms.TextBoxBase.WmReflectCommand (Message & m)

  at System.Windows.Forms.TextBox.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Clues as to what I can hurt?

  Thanks in advance,

  Karyne

  Hi Karyne,

  DB2 connector with detection of schema only supports DB2 LUW (Linux, Unix, and Windows). This was made clear in the latest documentation.

  But you should be able to use the generic ADO.NET and IBM DB2 connector for i.NET provider to access the DB2 iSeries system database. You must write your own select queries and - if write support is neeeded - your own update script.

  https://documents.software.Dell.com/Identity-Manager/7.0.2/native-database-connector-user-guide-for-connecting-DB2-databases/native-database-connector-for-DB2-LUW-databases

• Convert String to DATE

  Hello

  There is a '20091002' chain, and I need to convert it to this day.

  20091002 is in format YYYYMMDD - the VARCHAR2 data type

  I need the above in DD/MM/YYYY - DATE datattype

  '20091002' (VARCHAR2) - 10/02 / 2009 "(DATE)

  Thank you

  Aman

  Hi, Aman,

  user13115886 wrote:

  Hello

  There is a '20091002' chain, and I need to convert it to this day.

  20091002 is in format YYYYMMDD - the VARCHAR2 data type

  I need the above in DD/MM/YYYY - DATE datattype

  ...

  You are contradicting yourself.  All dATEs have the same format, and it's nothing like YYYYMMDD or DD/MM/YYYY.

  If you need a DATE, use TO_DATE:

  To_date (str, 'YYYYMMDD')

  but it will not be in the format MM/DD/YYYY

  If you want to convert a string into a format to another string in another format, and then use the string manipulation functions to reorganize secondary channels, for example

  REGEXP_REPLACE (str

  '(\d{4})(\d{2})(\d{2})'

  , "\2/\3/\1".

  )

  or

  SUBSTR (str, 5, 2) | '/' ||

  SUBSTR (str, 7, 2) | '/' ||

  SUBSTR (str, 1, 4)

  but it will not be a DATE.

  If you were certain that str contains valid data, then you can call TO_DATE to convert a DATE and then call TO_CHAR to convert the DATE to a string in the format MM/DD/YYYY.  I do not recommend, because it is likely that the strings would not be valid.  It's one of the reasons why you should use DATEs to store the date information.