The cursor does not work correctly, difficult to control! Help, please!

Similar Questions

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• Signature "by the account" does not work correctly

  Features: iPhone 6 iOS available 9.2 41.1 GB

  I have configured and you can send from multiple e-mail accounts (6 including iCloud) on my iPhone.

  My problem: the signature "by the account" feature does not work correctly. I enable this feature, create distinct signatures, choose to send other than the default e-mail account. However, the default signature in the message, followed two copies of the signature on behalf of which I want to send the message below. I deleted and readded to each email account and of the signature, but find the same result.

  Having this problem as well, or very close.  I can't get the HTML signatures to work (IE, appear) when

  I sent mail from an account that has a.

  This question to a while back in older iOS and has been fixed, now it's back...

  I often crash parameters when you try to paste a HTML signature in place and when

  I have a y arrive, it does not show in the email project.  When I add a text character

  at the signing, he sometimes shows up.  Very erratic...

• WMI does not work correctly. I need help fixing mine

  I have a program that has access to my WMI to keep my access key activated and it does not work.  I have windows 7 64 bit and need help please.

  Hi Youtoo54,

  ·         What is the name of the program that you are facing this problem with?

  ·         You receive an error message or error code?

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: You try to perform the following troubleshooting steps and check if it helps:

  Check the State of the WMI service start-up

  1. click on start, type "services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on the service "Windows Management Infrastructure.

  3. make sure that the startup type was set to "Automatic" and the service status is "started", otherwise, if it please change start type and click on the Start button to activate this service.

  Method 3: If the problem persists, let us register the WMI components.

  Save the WMI components

  a. click the Start button, and then in the "Search" box, type CMD.

  b. in the list above, under 'Programs', then right-click on CMD which appears above and choose 'run as administrator' and click 'continue'.

  c. in the open window, type the following commands one by one and press enter after each command:

  CD /d %windir%\system32\wbem

  for %i in (*.dll) do RegSvr32 %I s

  for %i in (*.exe) do %i/regserver

  Note: The WMI Tester window may appear, it is normal, and we can move forward to close.

  d. restart the computer and check if you receive errors.

  Let us know if that helps.

• Webcam does not work for Windows 8. Help, please.

  Hello

  I use the webcam on my laptop a bit, but recently, it has been in place. He decides little when he wanted to work. However, last week it stopped altogether. I went into Device Manager to try to understand what could be the issue but my phone shows No imaging devices!

  My phone is a Samsung NP350EC A0CDX.

  Can someone help me please get my webcam working again, because it is very important, and I can't afford to buy one that will clip on my laptop as a substitute.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• my scrolling does not work on my laptop? Help, please

  my scrolling does not work without the key and hold. Help, please?

  Hello

  · What is the operating system installed on the computer?

  · What is the number and the model of the laptop?

  · Will there be any changes made on the computer before the show?

  I suggest you to access manufacturer's website and check if there is the latest drivers or patches published for touchpad that you can install for your laptop.

  See: to update or change a device driver: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/devmgr_changing_drivers.mspx?mfr=true

• Headset microphone does not work on Aspire E14. Help please?

  I bought a laptop Aspire e14 and a headphone (GE Voip stereo headset 98974), but the headset microphone is not detected by my laptop.  I tried other headphones, but the microphone still does not work. I updated the driver but it still does not work.

  Device Manager does not detect the other microphone.

  

  Helmet has a single 4-pin socket.

  Help, please.

  Thank you

  Anne

  EUREKA!

  I managed to solve the problem!

  In case you are experiencing the same, this could work:

  1. pull upward the TASK MANAGER. Under the "Startup" tab, check if the Realtek HD Audio Manager is disabled. If so, right-click on it and then click on 'enable '.

  

  2. search for "Realtek HD Audio Manager" and click on it.

  

  3. on the Microphone tab, check that the microphone is not on mute and click the icon of the folder on the right side

  

  4. Once you click on the folder on the right side, a pop up as will appear and you will need to make sure that the box is checked as the image below:

  

  5. now, plug your headset device and you should see a pop-up message like so... and check on the option button "HEADPHONES".

  

  Now you can test the microphone using sound recorder or Skype.

  It worked for me and I felt so helpless.

  I even tried Acer support cat and the person has not yet asked troubleshooting and just told me to bring the product to a service centre

  I hope this helps!

  Thank you

  Anne

• WiMAX Motorola USB modem does not work with my laptop. Help, please.

  My clear USB modem worked for a year and a half and now it will not.  It does not work on my desktop PC.

  A clear employee told me that it is a problem with my laptop.

  Can someone help me?  I do a system restore?

  I have a wireless modum and my Presario CQ50-130US will not accept the connection.  I called the provider, and they say that all systems are a 'go' at their end.  The problem is with my laptop.  I didn't let any guarantee.  Any suggestions?

• Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

  Since a few days I can hardly use Lightroom more. A few minutes after you start Lightroom, it becomes extremely slow. The cursor will also each where I don't want that. If I'm looking for a photo it stops on any other photography. When I close Lightroom I and start it again I can use it for 3 or 4 minutes without problems, but it starts again. If I open it in Adobe Photoshop Lightroom Photographers I have no problem. It is fair to Lightroom. I hope someone can help me.

  What tasks you perform in these "minutes"?

  Specifically, you do a lot of brushing or healing spot?

• Crop tool suddenly does not work correctly... Help

  I have CS4 and my crop tool still worked perfectly until yesterday, when I tried to crop an image and he cropped the ENTIRE image.  I can't culture anything without him doing that.  What happens here?  I'm an Illustrator and I need to crop my images somehow and save the different file types and sizes so it's very important and urgent.  Please help if you can.  Thank you.

  It of a bit hard to tell from your description, but try the following

  and see if it helps:

  Make sure you have all the values entered in the options toolbar

  for the width, height and resolution. Otherwise, use the clear button.

  

  If it still does not, try to reset the photoshop preferences:

  Hold down the shft + alt + ctrl keys at photoshop startup keys, hold down the

  until a dialog box appears asking you to reset the parameters file, click Yes.

  MTSTUNER

• BlackBerry Smartphones my "BOLD" does not work from... Help, please

  Hello, I have a Blackberry 9000 "BOLD" device. last day, when I changed my SIM card & put the battery on the starting point, is not starting at all.

  When I put the battery, the red light is on during approximately 10 seconds (without flashing, right now) then after a few seconds the white screen comes with the loading circle... and then set turns off and the red lights again.

  Its like light - red > white screen > light > white screen >...

  I tried many times, but it does not solve. I removed the battery for hours more, also same result. I connect it to the pc with USB, but it does not and PC also does not find the device. BlackBerry Desktop Manager failed to connect with him. How to fix it... Please help me... I have a lot of data in it. In any case, I have to start for once...

  The red light still flashes? Do you see anything on the screen?

  Try to reload the software on the BlackBerry using the article below.

  KB10144 - how to force detect the BlackBerry smartphone using the Application Loader

  Thank you

• My first does not work... NEED HELP PLEASE!

  Hey!

  I really need help!

  I downloaded the cloud adobe creative pro adobe 2015 first cc and when I start it upward

  error "Adobe Premiere Pro could not find capable video game modules

  Please update your video display drivers and repeat"appears.

  
  

  I don't know what to do...

  
  

  my graphics card is the Strix OC ASUS GTX 970

  and my processor is the intel core i7 6700 K 4.0 Ghz

  
  

  I checked my graphics card drivers and they was up to date.

  I tried many things, but none of them works!

  My operating system is Windows 10 Pro 64-bit

  P.S adobe software all work in my computer perfectly fine... only the first dosen't work...

  
  

  hope you will reply quickly...

  It's important!

  Have a nice day ():
  

  try to disable linkscanner and shield online because they block adobe a reason any. You can also try adding exclusion lists.

• Data error (cyclic redundancy check) and the disc does not work correctly

  Original title: I installed the mainly broadcasts music on this disc many times without probs, now I get "data error (cyclic redundancy check)".

  I installed it now mainly music programs of this pile of disc of times with no probs, I get the error message "data error (cyclic redundancy check)" on all the programs on this disc, when I put the disc in the drive of my pc seems to be a bit slower than normal too. one of the programs is fruityloops 8, if I click on install, but click on fruityloops 8 engine I get ' ZipMsgXX.res is probably not related to the executable string ID missing is 11036' as I have 6 fruity, I thought that it could install using Installer 6 fruity but it wont... someone help...

  Hi shaunrollett,

  Control of cyclic redundancy or CRC errors, usually occur when copying data to a CD or DVD. The error may indicate a bad block, a damaged disc or a hardware problem.

  You can check whether or not the CD works in another computer.

  You can try to run the Fixit mentioned in the link below and check if it helps to reolve the question:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problem

  Hope this information is useful.

• Clicking on web links embedded in the email does not work correctly

  With FF3.6 and earlier versions when you clicked on a link in an email, the focus would turn to the FF window with a new tab open to the linked web page. With 4.0 when you click window link a launches new FF, reduced to a minimum and it is on my homepage instead of the page in the link. My email client Thunderbird 3.1.9, my OS is Linux/Fedora 14.

  It works for 9.01?

• Execute advanced action does not work in Captivate 9. Help, please!

  Hello

  I created a simple questionnaire and use to execute advanced action if students take the test, a new slide is displayed. To fail back to the quiz. Here is the screenshot of what I put in place. I think I followed the correct instructions, but whenever I tried it in preview mode, it doesn't. After the last slide in the quiz, he continued to go to the next slide. Thank you!

  

  

  You choose the wrong system variable. I guess you want to check the score, not the maximum score?

  Use cpQuizInfoPointsscored or cpInfoPercentage. Here is another link where you can download a descriptive table with all system variables:

  System variables in Captivate 8/9 - Captivate blog