The default user ID Admin/password deletion

Similar Questions

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• Show only the default user name and password

  Hi all
  
  I want to just display the default usernames and passwords. Can I do this?
  
  Thank you!
  Dan.

  Try this,

  SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);
  

  Note:-some of us who have done more than a CREATE CONTROLFILE and observe what is happening know that V$ DATABASE. CREATION is not 'Date of the creation of the database'.
  It's actually "date of creation of the * controlfile."

  Source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

• Default user name and password on Stor.e Tv

  Hey,.

  I just bought a 2 TB stor.e TV set and switched all my files on it, I am trying to access the network and it asks me a username and password but I never put a!

  Do anyone knows the default user name and password OR do you know how I can create a?
  Also has there NEVER been an update of firmware for this thing?
  Best thing I can say, is that there has not been since 2010.

  Any help is greatly appreciated!

  Bravo guys,.
  John.

  To my knowledge the TV StorE is not secured with any passowords.
  I think you should try to Stor.E TV to factory default value.
  To do this, you must go to configuration-> General Setup-> default.
  But if it fails, and the store TV is not able to start, then this may be a malfunction of the equipment.

• I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

  I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

  "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

  Try to clear your Cookies for this Web site.
  
  Tools > Options-> life privacy - Cookies = the button show Cookies.
  
  You must use the custom settings for history at the top of this tab to see the View the Cookies button.

  Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

  Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
  When you are finished click Close.

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• How to enable the Quick Launch bar for all profiles (for example, the default user)

  I need to configure XP to the Quick Launch bar is activate without worrying who logs in (for example, to add the parameter to the default user profile).  How can I accomplish that?  Tweak registry?  If Yes, what?

  Thank you!

  Hello asdf234234,

  Please post your question in forum Windows XP TechNet as they manage all domain related issues.

  See you soon

• How to customize the default user profile in Windows 7?

  I changed all my preferences for how I want the start menu, background etc to look at, and I wish that every new user to have the same look. Can I change the default user profile?

  Can of course. Try this:
  1. turn your environment exactly as you wish.
  2. restart the computer in Mode safe.
  3. log on as an administrator.
  4 rename the c:\Users\Default user c:\Users\Default User.org folder
  5. rename the folder c:\Users\Phil c:\Users\Default user (assuming that "Phil" matches your profile folder).
  6. give everyone read access to c:\Users\Default user
  7. create a new account, and then sign under this account to test.

• Customize the default user profile in Windows 7

  Hi all

  "With our XP pool view we could make all our customizations you made to the image of the master then go in" System Properties "->"Advanced"->"User profiles"and copy the profile of the user of the model in the folder"Default User"hidden under"C:\Documents and Settings"and all new domain users who have logged in our pool of non-persistent linked clone would get all the customizations... nice and easy.

  With Windows 7, the option to copy the profile is grayed out. To work around this problem, we found that we could use sysprep and that it points to a file with the option < CopyProfile > unattend.xml and need customizations, realize you the local administrator and copy them into the C:\Users\Default user profile. Here is the command that we would run

  C:\windows\system32\sysprep\sysprep.exe/OOBE/redemarrer / generalize /unattend:c:\scripts\unattend.xml

  Subsequently he will reactivate the local administrator account, but it worked well... until we realized that we could only run sysprep about 3 times and then we would have a limit trying to rearm! Has anyone found an easy way to customize the default user profile without falling on these issues?

  We tried to make as many customization we can with group policy, but we seem to have hit a wall

  We use free software called DefProf made by ForensiT.

  http://ForensiT.blogspot.com/2010/09/changing-default-profile-on-Windows-7.html

• Delete the default user folder

  I recently bought a new laptop and give my old one to my son. I would like to change the user folder by default of my name to his, but am unable to do so. I created a new folder of the user with his name and copied all the default files and folders inside. The old folder of the user who was my original default folder is empty, but when I try to delete, the message window indicates that windows is 14.3 GB of content recycling and then did not finish remove it because it indicates also the folder is open and in-use. I'm afraid that my old (default) user folder and the new are linked somehow, and if I managed to remove an old, I can finish to remove all. Can someone help me complete the process correctly?

  Sorry, you're going to have about it the wrong way. The "Default" folder is a model that is used for all new accounts. Do not delete and and you should not change it unless you know exactly what you are doing. When you create a new account (for example, 'John') and log in under him for the first time then what follows is done automatically:

  1. A profile file c:\Users\John is created.
  2. The content of the default folder is copied to c:\Users\John.

  There is no need to make a copy. Let Windows do its job instead!

• FDMEE - delete the default user settings

  Hi all

  We have some users who have selected the default POV members in FDMEE.  What we discovered is that user settings are priority on the application settings and system and do ensure that the user is always stuck on the POV that they put the first day by default.  They can define a different value by default each month, but I don't see the point if we update the adjustment system each month worldwide for them.  Please correct me if my understanding is not correct.

  I want to be able to clear the default values for the user and I ask not to put more.  Rather than upgrading security and giving all users access to the 'user settings' so that they can remove manually, I wonder if there is a way easier and more automated.  I can see with the following query parameters.  Could erase these files without any harm through SQL, or is there a better way?

  THX,

  Mike

  Query:

  SELECT PROFILE_OPTION_NAME, LEVEL_ID, LEVEL_VALUE, PROFILE_OPTION_VALUE

  FROM dbo. AIF_PROFILE_OPTION_VALUES

  WHERE LEVEL_ID AS "1010"

  Results of the sample:

  PROFILE_POV_PARTITION 1010 testuser 26

  PROFILE_POV_PERIOD 1010 testuser 2014-07-31

  PROFILE_POV_CATEGORY 1010 testuser 1

  You don't need to bother erased. In the Control Panel options: just the Global Mode of POV Yes Application user settings & POV POV if present will be ignored.

• Cannot remove the old user account (admin)

  I'm on a MacBook Pro 15 "the retina with OS X Yosemite 10.10.5.

  I have two admin accounts, an 'old' I do not use and a more current that I use.

  I want to delete the 'old' admin account, but I get an error message: "cannot delete user... account error backup in the home folder for this user."

  Here are the steps I followed:

  1. System Preferences-> users and groups

  2. click on unlock icon; authentication with username and password

  3. click on the 'old' user account and click on the button "-" to remove it.

  4. Select the option "save the home folder in a disk image", then click on remove the user

  5. for the moment, he says 'delete account '.

  6 then I get the error message.

  I know that I could choose the second option (in step 4), but I really want to move the old files of the user users users/Deleted.

  Any advice or ideas would be greatly appreciated

  

  The first thing that comes to mind is the following: is there enough room for the disc to be created image and put in files? The files are not moved from the reader to the disk image, they are copied. Then for a time in the account to be deleted files will be on the computer two times. The second thing that comes to mind is that there is a directory of the hard drive problem. If you do not have enough space and is my first problem, start the recovery partition and use the directory of disk to repair the drive. And the third thing that might be the cause of the problem is a bad file that cannot be copied to the disk image. It will be difficult to understand because basically, you will need to open each file to find the one that is perhaps incorrect.

• Stored user names and passwords, deleted on reboot

  We recently opted for IBM Thinkpad T410 at work running XP with all the latest updates/patches.  Most of us have problems mapping network drives to another domain.  When you restart, you are prompted to enter your password again to explore the mapped drive.  Passwords are not saved even if you have checked the reconnection to the connection option when you drive mapped (and added the specific domain username/passwd).

  I solved the problem on my machine by changing the value of the \DeferFlags HKEY_CURRENT_USER\Network\ key "driveletter" from 1 to 4.  In addition, I changed the subkey to HKEY_CURRENT_USER\Software\Microsoft\Protected Storage System Provider to inherit the permissions of its parent (giving him admin instead of simply the rights of system access).

  I do not know which of the above has solved the problem on my machine but my discs now connect automatically and I can see the disk/username in the stored usernames and passwords.

  I tried the same changes on a colleagues machine and it did not work!  Whenever it restarts it is prompted to enter a password again.  In addition, the reader/user name disappears from the stored usernames and passwords even if I grabbed manual is here and then restart (have not tried command line entry net use).

  Just as surprising is if I delete all mapped drives, verify that they have been struck from the register, and then remap them and choose reconnect at login option, they will be always created with the DeferFlags set to 1.  I have to manually change for 4 (my understanding that 1 = does not record the pass, 4 = save)

  I searched high and low... found loads of people facing a similar problem... but not a solution.  Help would be greatly appreciated

  Hello
   
   
  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question on the TechNetWindows XP Service Pack 3 (SP3) category.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove the default user in Windows 7

  Some of the original user files became corrupt, in order not to lose all the files, we have created a new user on the same computer.  Now, when we remove the user name and files, original when the computer restarts, we cannot go back... He asks a password with a completely different name we have.  Where and how do I change the system for the new user to the default value and remove the old?  Thank you

  I wrote a longer version of the recommendation that Frederik Long has given you and then deleted because I'm not sure that I fully understand your situation.

  If you can get into Windows, then follow the advice of Frederik long.

  If you are unable to Windows, what do you see when you start the computer?  In other words, don't you see the Welcome screen with one or more of the icons for user accounts?  If there is only one icon and it's a 'completely different' user name this is the old name you deleted?  If not, what is?

  You have a Windows 7 system repair disc or a Windows 7 installation DVD?