The details of the selected marker

Hello

I can't get the selected marker cordinates when pressing the button legend attached photo.

The only thing I get is focusedId.

I want to get Lat and Long coordinates to transmit in RouteMap applicant.

Any ideas?

I found the solution.

QString ApplicationUI::getDataFromPin() {
    QString points=mapView->geoUri();
 return points;
}

And then you get the two coordinates to a string.

Tags: BlackBerry Developers

Similar Questions

In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

You are welcome

Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

I am trying to set up a window to the top-

-follow the instructions of top to select a backup disk - I did

-Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

-in the past, this disc has been used ONLY as a backup disk

-When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.

-I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."

-Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".

-l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.

-When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?

(I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"

Original title: Back Up system - disk and check

Since this is a secondary drive chkdsk/r can be run without having to reboot. Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ». This will cause no harm. Although not strictly necessary, I recommend you to reboot once completed the disk check. This will solve any problem related to the file handles.
If chkdsk/r reports bad sectors, you should replace the disk.

the detailed report based on the selected value
Hello experts,

I use 10g obiee.

I have a requirement were on the dashboard there are 4 guests say product, region, year, color.

All are select muli-value prompt.

on the dashboard, there is a synthesis report that reflects the value according to the selected data from the command prompt. His work so far.

Now below the customer wants a link that has the title of 'detailed report '. When they click the hyperlink, they want to see detailed but it show only the values selected in the command prompt.
They claim as detail as there are more number of columns found in the report detail than the summary report following.

Can we can suggest me how to achieve in 10g.

Thanks a lot for your help.
Hello

Just add your detailed report to the dashboard as a link or an Image and keep the required columns, you are invited into the report. It should work.

Thank you
Gerard

How can I find the music marked with an exclamation point in my itunes library?

How can I find the music marked with an exclamation point in my itunes library?

Hello there rdgernnr!

I certainly don't want to find the songs that show the "!" and get them to play correctly. If you have not yet done it, read this article: If you see an exclamation point next to your items in iTunes - Apple Support

More precisely:
Correct the path of the media file

Follow these steps to help find the correct location of the file iTunes media:
1. In iTunes on your Mac or PC, select the song, album, movie, or television show that has the exclamation next to him.
2. In the MenuBar at the top of your screen, computer or at the top of the iTunes window choose Edition > read the information.
  If you are using Windows and you don't see the menu bar, Learn how to turn it on.
3. When you see a message asking if you want to locate the file, click search.
  - If you know the location of the file, point to it iTunes and try to read your content.
  - If you do not know the location of the file, search for it:
    Mac: Press ⌘ and space control your keyboard, and then type the name of the movie title, app, song, album or artist.
    Windows: Press the Windows on your keyboard, and then type the name of the movie title, app, song, album or artist. If your keyboard does not have a Windows key, press the Escape (Esc) and control (Ctrl) on your keyboard.
  - If the file is on a network drive or external, plug on the volume of disk or external network.
  - If you find your objects in the trash or recycle bin, restore them to their previous location:
    Mac: Control-click or right-click on the item and choose put back.
    Windows: Right-click on the item and choose restore.
4. Once you retrieve the file, use Get new Info to locate the file, and then point iTunes to the correct location.
See you soon!

Safari does not start, or crashes on the selection

My Safari now plays too much upward. It does not start at all. Hangs on the selection, with the message that "Safari quit unexpectedly. " Click open to open the application again. This report will be sent to Apple. "I'm using now Firefox - I studied several sites and other problems of sounding similar, deleted the files they suggest, allowed, caches, cookies, removed 3rd party software, (I think it's where my problem started this afternoon, my mobile phone operator, Vodacom detailed billing report requires the software titled 'ecrypt' for open invoices, and started crashing when I tried to open a.) I eventually trashed the software, but to no avail...) and did what you suggested to the person above. I got the following results:

Step 1. I signed out and signed him as a guest - user will understand - works Safari very well! Then I logged as Clive Lake, and it crashed immediately, would not start or start and with the same message...

Step 2. I rebooted in safe mode after unplugging all devices: No go I'm afraid... I tried several times and I'm actually still in safe mode.

It would seem that something I did in my profile caused the problem.

Any advice about where to go from here would be appreciated.

Concerning

Clive L.

iMac (21.5 inch, at the end of 2013)

OS X v10.11.1

3.1 GHz Intel Core i7

16 GB 1600 MHz DDR3

NVIDIA GeForce GT 750M 1024Mo

Run the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Step 1

For this step, the title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name, may appear in the log. Anonymize before posting.

Step 2

In the Console window, select

DIAGNOSIS AND diagnostic USE information reports ▹ user

(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

I know that the report is long, perhaps several hundred lines. Please report all this anyway.

If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

Please do not post other types of diagnostic report - they are very long and rarely useful.

When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Remove the check mark a ring or an Enum control

This was requested previously by others, but I've seen a complete response. For a control ring (or enum), a check mark appears next to the current item / selected when you open the menu drop down. Is there a way to remove the check mark? I would like to just a menu drop-down regular and unadorned.

A similar feature exists for context menus in LabVIEW using the terminal "checked" to the "Set Menu Item Info" feature. Is there something like this for the drop-down lists of the rings and enumerations?

I am aware that a combo box doesn't have these marks, but the drop-down list box is undesirable because it does not open the dropdown menu unless you directly click the drop down arrow. Think of almost any online form you had to fill out and you probably encountered a drop down menu like that I try to recreate, for example:

Thank you!

Never actually noticed this check until you brought it to the top! A hack that you might try is to change the drop-down list box control, so that the button that goes down the list covers all of the control. You can make transparent and "bring to front", so that if the user clicks on the box, the menu drops down. You can add a small triangle black, just to make it obvious to the user that it goes down.

Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

My Boot.ini file at this time was:

[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

I looked towards the top of this help page, but for now I'm unlucky:

http://support.Microsoft.com/kb/314477

(The next steps I took by throwing from the Windows CD and go into the repair console)

I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

He gave me something like:

[boot loader]
Timeout = 5
default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
"signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

I've also marked the partition on the D: as active (in computer management), but it did not help me.

I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

Could a clean install two HDD help? I hope I won't have to do...

Someone has an idea?

PS: I'm not such an advanced user so I need a solution step by step, thanks!

Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

(except I've had the first installation already done).

Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

Error when you try to add a song to Windows Movie Maker: the selected file is not valid or is corrupted.

Sometimes, when I add a song to Windows Movie Maker it does not work.

When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

Help, please

When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

Help, please

2 responses on itunes and Windows Media Player (WMP) are:

1.

RE: iTunes and WMP - MusicBridge

Found this on the web. I can't vouch for it. Use it at your own risk.

Excerpt:
iTunes is not compatible with Windows Media Player. iTunes is - like Apple-very protective of any product and does not like to share. So, you have to force off iTunes and WMP.

To do this, you can use this sloppy program: MusicBridge.
The description of its creator:
MusicBridge allows people who use both iTunes and WMP on the same machine to keep their libraries in sync. MusicBridge offers a variety of synchronization options so that you can manage your collection of music in the media player, or both. MusicBridge duplicates of meta-data between Windows Media Player and iTunes, it does not copy the physical files between applications.

Version 2.0.1 is a bug fixing release.

Best thing: it's free.
http://download.CNET.com/MusicBridge/3000-2141_4-10530687.HTML?tag=mncol;psum

2.

courtesy of musiclover101:

http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff

convert the songs in your iTunes library to a format that Windows Media Player can understand

You can convert the songs in your iTunes library to a format of Windows Media Player can understand - (I tend to use mp3). This can be done inside of iTunes itself. If the songs in your iTunes library were purchased in the iStore and were purchased in the plus version (indicated by a small sign above the price of a song +), then they are DRM free, so they can be converted easily. However, if the songs were not purchased in the format more, you can convert them for 30 cents each. I highly recommend that you do as the plus version of songs are premium quality - and since they are DRM free, you can use them in almost all applications and you can burn them to CD and play almost anywhere. All the songs on the iTunes store are now version more, so you don't have to worry about searching for them in the future.
To convert songs to Windows Media Player can understand, open iTunes, and then do the following:
1. click Edit, preferences, and go to the general tab
2. click on the button "import settings".
3. change the "import using" at "MP3 encoder".
4. click OK and go back to your music library
5. choose the list view and select the first piece of your library
6. scroll all the way to the last song in your library
7. press the button SHIFT key, then click the last song to select all the songs in your library
8. click on "Advanced" and then "Create MP3 Version."
9. your songs should start to convert and according to how many songs do you have in your library, this could take some time
10. open Windows Media Player and press F3 or click file, add it to the library

11. click on OK - Windows Media Player should start to search for songs on your computer and after that he finished the search, you should find the songs in your library in your Windows Media Player to iTunes library.

NOTE: This method will not work unless you have purchased iTunes songs or if you have converted the songs iTunes more for each 30 c

For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

I have a microsoft wireless keyboard4000 when I try to use the question mark I get / can you tell me what the problem with it I was getting with a line above.

I have a microsoft wireless 4000 keyboard when I try to use the question mark I get / can you tell me how to fix

or what is the problem, I received an e with a line above.

Hello

1. what was your keyboard last working fine?
2. you remember to make changes on your computer recently?

Try the steps and mark for the question below.

a. click the Start button, type region and language and press ENTER.
b. click the keyboards and languages tab.
c. click Change keyboards.
d. in the pop-up window, click Legeneralonglet.
e. under default input language, select English (United States) - US or any another language you use generally.
f. click on the OK button.
g. click OK button region and language.

I hope this helps.

Thanks and greetings
Umesh P - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Box "Always use the selected program to open this kind of file" is grayed out out__cant change file association for any type of file

I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help

Hi VikkHckrz,

1. you remember to make changes to the computer recently?

Method 1:

You can consult the following KB article and run the fix it tool available and check if you can assign file association.

When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

http://support.Microsoft.com/kb/950505

Also check out the link:

http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

After running the fixit so check the option is grayed out or not.

Method 2:

If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps.

a. Click Start, type regedit in the search box and press ENTER.

b. navigate to the

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

(c) in the right side of the screen, double click on "NoFileAssociate".

d. change the value of "NoFileAssociate" from 1 to 0.

e. exit the registry editor and restart the computer and check.

Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

For more information about how to back up and restore the registry, follow the steps from the link below:

http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

See the selection in the image selected when the use of invokeFilePicker() second time

Hello

I use invokeFilepicker() to select images to my Gallery.

The code I'm usign is like that, and it works fine.

function openFilepicker() {
// filepicker options
var details = {
mode: blackberry.invoke.card.FILEPICKER_MODE_PICKER_MULTIPLE,
type: [blackberry.invoke.card.FILEPICKER_TYPE_PICTURE],
viewMode: blackberry.invoke.card.FILEPICKER_VIEWER_MODE_GRID,
sortBy: blackberry.invoke.card.FILEPICKER_SORT_BY_NAME,
sortOrder: blackberry.invoke.card.FILEPICKER_SORT_ORDER_DESCENDING
};
blackberry.invoke.card.invokeFilePicker(details, function(path) {
patharray = path;
//blackberry.system.setWallpaper('file://' + path);
showToast('Wallpaper changed!');
var tempChose = selectedPhotosDiv();
$('.chat-input-container').prepend(tempChose);
},
// cancel callback
function(reason) {
showToast("cancelled " + reason);
},
// error callback
function(error) {
if(error) {
alert("invoke error " + error);
} else {
console.log("invoke success ");
}
});
}
function showToast(msg) {
blackberry.ui.toast.show(msg);
}

Now after selecting images and choice made, I want to again select some pictures more.

So here, I want to make the selected alreay images selected.

I already have the list of the table that is selected, but I don't know how to make the selection.

Waiting for more

Thank you

Hi there, I took a quick glance through the docs:
https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.Invoke.card.filepickeroptions.html

And AFAIK, the API will not lets you specify a file to be highlighted when the selector is presented. You could present this as a JIRA / fiction asks through the developer Issue Tracker.

Selector - return and displaying the selected value

Hello all, I have problem with selector which is connected to the simple XML through XMLDataModule.

Definition:

{} Selector
ID: piCountry
Title: qsTr("Country:") + Retranslate.onLanguageChanged
dataModel: {XmlDataModel}
Source: "states.xml".
}
pickerItemComponents:]
{PickerItemComponent}
type: "ListItem".
content: {container
{Label
text: pickerItemData.title
}
}
}
]
onSelectedValueChanged: {}
var piCountry.dataModel.data = selectedItem ([0, selectedIndex (0)]);
Console.log("Selected>"+SelectedItem.Text)
}

}

STATES. Model XML:

...

1. I can't achieve good get selected value based on the index selected. After Exchange of selected value, the error message appears:

ERROR: UIObjectPrivate::notifyMessage: unable to set the focusIsDelegatedToColumn property
ERROR: UIObjectPrivate::notifyMessage: unable to set the focusedColumn property
some > undefined

2. is it possible to display the value selected in the selector bar (after choosing and collapsing)?

Thanks for any idea, I have been addressed in the morning but no reasonable results so far.

Thank you.

Karel

Looks like you're missing the good at the end, add a ".title' in there like this:

var selectedItem = piCountry.dataModel.data([ 0, selectedIndex(0) ]).title;

Here is an example of a complete code of a similar selector to select a State, and also has a method to set the value of an external call and a method to change the title, once the switch has been reduced (must cover your 2nd question).

/* Copyright (c) 2014 BlackBerry Ltd.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 *  Created on: May 5, 2014
 *  Author: Mark Sohm
 */

import bb.cascades 1.2

Picker {
    property string stateValue: ""
    id: siteStatePicker
    title: "State"
    kind: PickerKind.Expandable
    dataModel: XmlDataModel {
        id: stateModel
        source: "../xml/US_States.xml"
    }
    pickerItemComponents: [
        PickerItemComponent {
            type: "state"
            content:
            Label {
                id: stateLabel
                text: pickerItemData.name
            }
        }
    ]
    onSelectedValueChanged: {
        siteStatePicker.stateValue = dataModel.data([0, selectedIndex(0)]).name;
    }

    onExpandedChanged: {
        if (!expanded)
        {
            siteStatePicker.title = siteStatePicker.stateValue;
        }
    }

    //Used to set the selected state.
    function setState(state)
    {
        for (var count = 0; count <= 49; count++)
        {
            if (state === stateModel.data([0, count]).name)
            {
                siteStatePicker.select(0, count, ScrollAnimation.None);
                siteStatePicker.stateValue = stateModel.data([0, count]).name;
                siteStatePicker.title = siteStatePicker.stateValue;
            }
        }
    }
}

It's xml data.

Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

Original title: Install windows 7 on GTP style partition

Nice day

I try to install windows 7 on my laptop but there is a massege

Say cannot install windows on the selected drive cos it's GTP

Partion of style, I was using before windows 8 but then format

My hard drive please guide me on how to archive this because only through

I'm really frastrated

Hi Nnrmalata,

1. you are trying to install 32-bit or 64-bit Windows 7?

2. What is the brand and model of your computer?

Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

For more details, refer to this link:

http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

(a) start from the Windows 7 DVD

(b) click on install now

(c) in the configuration screen, click Custom (Advanced)

(d) click on drive Options

(e) select the partitions to format

(f) click on Format - this will erase EVERYTHING on this partition

(g) create a new partition, and then select a partition to install Windows on.

(h) follow the on-screen instructions and install Windows.

Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

You can check the link for reference:

http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

If above did not help, please refer to the steps in this link.

Note: Backup your important data to an external drive

Change a Table of Partition GUID drive on a main boot drive

http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

[JDev12c, ADF] How to get the value of a field from the selected line in af:table and...

Hallo,
I want to double click on a line of an af:table to call a page that displays a form (based on a View object) with the details of the selected line.
I need to go to the second page the value of a field on the line that is selected on the first page.
How can I do this? In particular, how can I get the value of a field from the selected line? How can I call the second page on double-click on the af line: table?
Thank you
F.

Why would user, you need to pass a value of the line to the shape?

The framework selects the line you want to display in the form. All you have to do is to show the form with the selected line. It is the framework automatically as long as you use e vo even the same data control.

Timo

Post edited by: Timo Hahn
And the handling double-clicks is described here http://www.oracle.com/technetwork/developer-tools/adf/learnmore/56-handle-doubleclick-in-table-170924.pdf

The details of the selected marker

Similar Questions

Correct the path of the media file

Maybe you are looking for