The directory structure and using the correct syntax when using models of liquids and 'include '.

Similar Questions

• What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  TexasApexDeveloper wrote:

  Variable binding is preferred: P23_ID you can also use & P23_ID. (variable substitution notation).

  Bind variable and static text substitution references are not interchangeable. For example, static text substitution references cannot be used in allocation targets:

  :P23_ID  := 'foo';  -- valid
  &P23_ID. := 'bar'; -- syntax error (or something weird or sinister due to SQL injection)
  

  Substituting static text references should be avoided in SQL and PL/SQL code because of the risk of behavior topic SQL injection and / odd error because of values containing quotes, etc.

• Not finding the correct syntax for the select statement

  Hello
  
  The following statement works very well and gives the expected results:
  

  prompt
  prompt Using WITH t
  prompt
  
  with t as
    (
     select a.proj_id,
            a.proj_start,
            a.proj_end,
            case when (
                       select min(a.proj_start)
                         from v b
                        where (a.proj_start  = b.proj_end)
                          and (a.proj_id    != b.proj_id)
                      )
                      is not null then 0 else 1
            end as flag
       from v a
      order by a.proj_start
    )
  select proj_id,
         proj_start,
         proj_end,
         flag,
         --
         -- the following select statement is what I am having a hard time
         -- "duplicating" without using the WITH clause
         --
         (
          select sum(t2.flag)
            from t t2
           where t2.proj_end <= t.proj_end
         ) s
    from t;

  As an academic exercise, I wanted to rewrite the above statement without using the WITH clause, I tried this (amongst dozens of other tests - I hit a mental block and cannot understand):
  

  prompt
  prompt without with
  prompt
  
  select c.proj_id,
         c.proj_start,
         c.proj_end,
         c.flag,
         --
         -- This is what I've tried as the equivalent statement but, it is
         -- syntactically incorrect.  What's the correct syntax for what this
         -- statement is intended ?
         --
         (
          select sum(t2.flag)
            from c t2
           where t2.proj_end <= c.proj_end
         ) as proj_grp
    from (
          select a.proj_id,
                 a.proj_start,
                 a.proj_end,
                 case when (
                            select min(a.proj_start)
                              from v b
                             where (a.proj_start  = b.proj_end)
                               and (a.proj_id    != b.proj_id)
                           )
                           is not null then 0 else 1
                 end as flag
            from v a
           order by a.proj_start
         ) c;

  Thanks for the help, much appreciated.
  
  John.
  
  PS: The DDL for table v used by the above statements is:
  

  drop table v;
  
  create table v (
  proj_id         number,
  proj_start      date,
  proj_end        date
  );
  
  insert into v values
         ( 1, to_date('01-JAN-2005', 'dd-mon-yyyy'),
              to_date('02-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 2, to_date('02-JAN-2005', 'dd-mon-yyyy'),
              to_date('03-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 3, to_date('03-JAN-2005', 'dd-mon-yyyy'),
              to_date('04-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 4, to_date('04-JAN-2005', 'dd-mon-yyyy'),
              to_date('05-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 5, to_date('06-JAN-2005', 'dd-mon-yyyy'),
              to_date('07-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 6, to_date('16-JAN-2005', 'dd-mon-yyyy'),
              to_date('17-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 7, to_date('17-JAN-2005', 'dd-mon-yyyy'),
              to_date('18-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 8, to_date('18-JAN-2005', 'dd-mon-yyyy'),
              to_date('19-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         ( 9, to_date('19-JAN-2005', 'dd-mon-yyyy'),
              to_date('20-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         (10, to_date('21-JAN-2005', 'dd-mon-yyyy'),
              to_date('22-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         (11, to_date('26-JAN-2005', 'dd-mon-yyyy'),
              to_date('27-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         (12, to_date('27-JAN-2005', 'dd-mon-yyyy'),
              to_date('28-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         (13, to_date('28-JAN-2005', 'dd-mon-yyyy'),
              to_date('29-JAN-2005', 'dd-mon-yyyy'));
  insert into v values
         (14, to_date('29-JAN-2005', 'dd-mon-yyyy'),
              to_date('30-JAN-2005', 'dd-mon-yyyy'));

  select c.proj_id,
         c.proj_start,
         c.proj_end,
         c.flag,
         --
         -- This is what I've tried as the equivalent statement but, it is
         -- syntactically incorrect.  What's the correct syntax for what this
         -- statement is intended ?
         --
         (
          select sum(t2.flag)
            from (select a.proj_id,
                         a.proj_start,
                         a.proj_end,
                         case when (
                            select min(a.proj_start)
                              from v b
                             where (a.proj_start  = b.proj_end)
                               and (a.proj_id    != b.proj_id)
                                   )  is not null then 0 else 1
                         end as flag
                    from v a
                   order by a.proj_start
                 ) t2
           where t2.proj_end <= c.proj_end
         ) as proj_grp
    from (
          select a.proj_id,
                 a.proj_start,
                 a.proj_end,
                 case when (
                            select min(a.proj_start)
                              from v b
                             where (a.proj_start  = b.proj_end)
                               and (a.proj_id    != b.proj_id)
                           )
                           is not null then 0 else 1
                 end as flag
            from v a
           order by a.proj_start
         ) c;
  

• Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Transferred to DPS forum.

  You must configure the pages of appropriately for the target device. For iPad, it is 1024 x 768.

• What is the correct syntax for the use of a variable in an ad-hoc query?

  Hi all
  
  I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.
  
  So I thought I'd use a variable for this.
  
  Then, I built this type of SQL statement for only a small subset of records:
  ----------
  variable number recNumber;
  exec: recNumber: = 1;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).
  
  In any case, I also tried this one:
  ----------
  CREATE SEQUENCE seqCounter;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)
  
  Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?
  
  Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?
  
  Thank you muchly

  If you want to add a unique number to a column, then it would be:

  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
  WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
  

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct syntax to a PDF form file name in the subject line of an e-mail. Doc Javascript?

  The name of the file is not part of any form field. The name of the file will be also unique whenever the form is used. I also want the name of the file that will be followed by the expression 'evidence' returned by the customer, as in:

  Topic: Proof of Papa Murphys SALEM 8 - 30.pdf returned by the customer

  Here is my existing script, but I need to know the syntax to get the PDF file name added in the subject line.

  this.mailDoc ({bUI: true, cTo: "[email protected]", bassujetti: "proof returned by the customer", CMSG: "attached is the signed evidence.}) Please send to the graphics dept '});

  I'm not very familiar with Javascript so have tried to reconstitute it.

  Unfortunately, there is only so much you can google to get a working solution, I would suggest that you get at least a little familiar with JavaScript (there are a lot of good tutorials and books available). If you want an introduction to Acrobat JavaScript, have a look here: Beginning JavaScript for Adobe Acrobat

  There is a property of the document object that returns the name of the file. You can read the property of Doc.documentFileName here: DC Acrobat SDK Documentation

  In the simplest implementation, you can use this to enter the file name in the subject line:

  this.mailDoc({bUI: true, cTo: "[email protected]", cSubject: this.documentFileName,  cMsg: "Attached is the signed proof. Please forward to the graphics dept"});
  

  If you want to add more information that just the file name, you will need to assemble your subject line by using variable elements and string constants. Something like this works:

  this.mailDoc({bUI: true, cTo: "[email protected]", cSubject: "The filename is " + this.documentFileName,  cMsg: "Attached is the signed proof. Please forward to the graphics dept"});
  

• What is the correct syntax for function in SQL expressions filters?

  Hello
  
  I want to build a report that looks at the last dates 4 snapshot.
  I got every snapshot using this filter date
  
  Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (7 - dayofweek (current_date) + 2), current_date)) has
  now the second would:
  Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (6 - dayofweek (current_date) + 2), current_date)) B
  a third
  Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (5-dayofweek (current_date) + 2), current_date)) C
  a 4th
  Snapshot Date. "' Snapshot date" = TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (4 - dayofweek (current_date) + 2), current_date)) D
  
  for simplicity let's call filters A, B, C, D
  so, my sql expression should be something like the snapshot Date. "" Instant Date "in 'A', ' B', ' d ', 'C '.
  I tried to combine the underside, with hooks and comma separated, without brackets, with single quotes and without, but I always get a syntax error.
  
  Snapshot Date. "" Instant Date "in TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (7 - dayofweek (current_date) + 2), current_date)).
  TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (6 - dayofweek (current_date) + 2), current_date)).
  TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (5 - dayofweek (current_date) + 2), current_date)).
  TIMESTAMPADD (SQL_TSI_WEEK-10, TIMESTAMPADD (SQL_TSI_DAY, (4 - dayofweek (current_date) + 2), current_date))
  
  He doesn't seem to like the function IN either.
  Any idea?
  Concerning
  G.
  
  Published by: user6185307 on October 27, 2009 08:07

  Take each of these filters and union in your report of responses.

  In this way, filter you up to exactly the last 4 days.

• The file converted for my site has errors in its design mode when you preview. I can't do these items appear in the correct position when you preview? And everything worked perfectly yesterday but the file converted don't? Answers to tha

  My site was working yesterday in the 2014 muse but once converted 20141 a couple of points, the same ones-on all pages are on-site during preview. I tried a number of things to fix this but can't seem to solve the problem?  All responses to this topic?

  Please send the file to [email protected] and indicate the specific elements that exhibit this behavior. A screenshot highlighting the elements on the page may be useful for the diagnosis more far.

• What is the correct syntax to hide a div on the scene within two nested symbols?

  Hi everyone, I recently started using Adobe Edge and had some prior experience with Flash.

  I have a button with a click inside two symbols action that should hide a symbol placed on the stage, which in turn is the symbol of the mother.

  I tried to use the following code, but it did not work:

  SYM.$("STEP1"). Hide();

  Thank you!

  Nuno

  You must get the symbol in order to play, and in the above code, you access its handle jQuery (and not get the symbol). Try this instead:

  sym.getComposition () .getStage ().getSymbol("Step1").play ("Step1_fade");

  HTH,

  Joe

• What is the correct syntax for it?

  Hey guys

  If...

  trace (rowsHolder.getChildByName("MC"+newStr).y);

  .. .correctly outputs it coordinate with (in this case) mc001, how out the coordinate y of a clip called item_base_mc that is located in the timeline of mc001?

  trace (rowsHolder.getChildByName("MC"+newStr).item_base_mc.y);

  .. .save me an error display object.

  I tried the permutations of the above with the brackets in various places, but have not cracked the code.

  What would be the right way to write?

  Thanks for taking a peek.

  Shaun

  trace (MovieClip (rowsHolder.getChildByName("mc"+"001")).item_base_mc.y);

  hope this will help you!

• What is the correct syntax to execute a procedure for SQL workshop

  I have a procedure that I want to test in the workshop of SQL in the APEX. He has an argument, but I don't know the syntax to include the argument. I put
  
  begin download_attached_files;
  end;
  
  How can I manually assign a number to this procedure?
  (IE it does not work):
  Start download_attached_files = 43; end ;)

  Hello

  Try:

  BEGIN
   EXECUTE download_attached_files(43);
  END;
  

  Andy

• 11i 12i fast installation - directory structures and users

  Hi all
  
  We run 11.5.9 and become just at our feet with the quick installation of 12i. We have already updated our database of 10.2.0.4.
  
  Each of our oracle environments works on two nodes - forms/Web on W2003 and everything on HP - UX.
  
  The HP - UX server is the DB and the demand for our Production and TEST environments - and we have two servers W2003 that make Web forms to PROD and TEST.
  
  My questions surround the user accounts on the HP - UX server. Please keep in mind this server manages the PROD and TEST.
  
  We have a user oracle (DBA group) and a user applmgr (PAO group) on the UNIX - these our PROD and TEST service accounts.
  I'm a little confused on the quick installation instructions. It shows that it takes to all run as root - and then you can specify other users (for example, oracle and applmgr).
  (1) when we ran fast installation first, he did a chown of oracle: dba at applmgr:oap on the DB oracle_home. Is - this law/make sense?
  1 a) with exit 12 - who has the oracle RDBMS House? Oracle or applmgr?
  (2) what are the best practices, account required to our HP - UX box. Should we continue to use the user of an oracle to manage environments - or should we set up two users of oracle and two user applmgr - eg oratest/oraprod and appltest/applprod?

  (1) when we ran fast installation first, he did a chown of oracle: dba at applmgr:oap on the DB oracle_home. Is - this law/make sense?

  Not correct. RDBMS_ORACLE_HOME will be owned by the Oracle user.

  1 a) with exit 12 - who has the oracle RDBMS House? Oracle or applmgr?

  Oracle user.

  (2) what are the best practices, account required to our HP - UX box. Should we continue to use the user of an oracle to manage environments - or should we set up two users of oracle and two user applmgr - eg oratest/oraprod and appltest/applprod?

  I suggest that you set up multi-user (applmgr and oracle).

• MacBook pro not recognizing the correct password when connecting

  When I try to login, it rejects the password - if I change username, then return that he recognizes her!

  Hi Richard2938,

  If your password doesn't work intermittently, first try to restart your computer.  If the problem persists, use the S.o.s. Keychain utility to repair your login keychain.

  Keychain Access: If you have a problem with key ring

  Otherwise, you can reset your password to admin (login):

  Change or reset the password of a user account from OS X

  Take care

• Error laptop Lenovo 3000 N. Some keys on the keyboard are not give the correct letter when you type

  
  

  What kind of letters? Numbers?
  Try Fn + NumLock to switch