Laptop stuck

Similar Questions

• I got this after my laptop 'stuck' and I had to restart everyting = "Basic error of data that can be updated windows found 0 x 80070490"

  My laptop 'stuck' and windows wouldn't load, I had to restart everything (I'm not a technophobe!), on the fact that he told me that I needed to update back to 8.1.

  However, I could not do this as he told me that I had to update windows 8 first of all - but update will not work.

  What do I do on Earth?

  http://support.Microsoft.com/kb/958044/en-us

  Windows Update, error 0 x 80070490

  Step 1: Use SFC system to repair damaged Windows files use System File Checker to repair damaged Windows files. To do this, follow these steps:

  1. Open an elevated command prompt.
  2. Run the command "sfc/scannow".
  3. Try installing the update again.

  For more information about the System File Checker tool, see using the tool File Checker system to repair missing or corrupted system files

  (http://support.microsoft.com/kb/929833)

  . Step 2: Run the DISM tool if the problem persists, use the Deployment Image Servicing and Management (DISM) tool to fix corrupt Windows Update errors. To do this, follow these steps:

  1. Open an elevated command prompt.
  2. Run the command "DISM.exe Online/Cleanup-image /Restorehealth".
     Important When you run this command, DISM uses Windows Update to provide the files that are necessary to fix corruptions. However, if your Windows Update client is already broken, use a Windows install running as the source of the repair, or use a Windows side-by-side folder from a network share or removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:
     DISM.exe / Online/Cleanup-Image /RestoreHealth / Source: C:\RepairSource\Windows /LimitAccess

     Note Replace the placeholder C:\RepairSource\Windows by the location of your source of repair. For more information about using the DISM tool to repair Windows, refer to a windows repair Image

     (http://technet.microsoft.com/en-us/library/hh824869.aspx)

     .

• HP pavilion 17 Laptop: stuck at the loading screen

  Hello!
  
  So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?
  
  Thanks in advance,
  
  Giovanni

  I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

• Pavilion g6: my laptop stuck after its original windows is installed and updated drivers

  Hello team HP;

  I recently get the support of the HP team and installed my original windows 7 Home premium using my product key. Then installed the updates wireless, Internet and network at home, but in a short time, my stuck laptop and keyboard no could not work at all except the power button. Then I installed my original windows 7 Home premium and it is, I can access although I could not installed other programs and my personal ducoment.

  My computer laptop detials:

  Note the model: HP Pavilion Notebook PC g6

  Model: g6-1320so

  So please help my problems, I don't know what to do?

  Thank you

  Hi @EID

  Thank you for your query.

  I understand that you did recently resumed, reinstall your original Windows 7 with the help of HP.  You were then installation updated drivers when the laptop froze and the only thing you could do was power, it works. You then reinstalled Windows 7 again, but can not install other programs or your personal documents.

  Have you tested for hardware failures? Screening of hardware failures (Windows 7, Vista )

  Have you checked against viruses and malware?  Malicious software removal tool

  Like you just HP support help with your original Windows 7 installation and the problem appeared after that, I suggest you contact HP support for assistance, especially since you have reinstalled again and are always problems.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Laptop stuck on the screen to "prepare the AutoFix.

  My laptop HP a few months came pre-installed with windows 8. When I tried to start it this morning it came with the screen to "Prepare the automatic repair" and is pasted on it. It is not off or change to a different screen as "scan your computer. I'm sure that it does not start in safe mode by pressing f8 or shift + f8, Ive tried several times. I don't know what to do because it's just stuck on the same screen "prepare auto repair.

  This is not a good thing. The long test. Post the results here.

  The result of the test is indicative of a hard disk failure requiring the replacement of the hard disk.

  Contact HP for a replacement under warranty hard drive. You will need the failure status code providing for the drive test hard when you contact HP.

  It's time to find your set of recovery disks. You will need to install the operating system and the software that came with your laptop.

  Best regards
  ERICO

• Laptop stuck in the Windows Resume loader

  I have toshiba satellite laptop and my keyboard stops working. While I started the computer I accidentally unplugged the computer will be of that load. Now my computer is stuck in "Windows resume loader" and I have no way to push enter to skip this screen. I can't push f8 to enter safe mode either. Help, please!

  I ordered a new keyboard, but it does not work either.

  Hello

  I suggest to boot from Windows Vista DVD and run the Startup Repair tool and check.

  Startup Repair: corrects some problems, such as missing or damaged system files that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  What to do if Windows does not start correctly: http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Diana

  Microsoft Answers Support Engineer

• Laptop stuck closed during the restoration of the system

  Laptop is stuck during the system restore? If I turn off computer manually by pressing the power button / stop it will mess up computer?  How can I fix it? The display shows 'Shutting Down' he was slaughtered like that for 2 hours now. Help, please?

  It is likely mean restoration of the system has failed for any reason any and therefore find it difficult to restart because of this.

  You may want to wait for someone a little more expert than me but normally peak I power the laptop through the main switch off and restart it.  At the start of the computer laptop once again he can ask you to start windows normally or in safe mode and you can then happily that we restart the PC and the system of cancellation/restore again.

• Laptop stuck on "Starting Windows" screen

  So, this afternoon, I tried to start my laptop HPG42-373, and it got stuck on "Starting Windows" screen. I ran tests of memory at startup and primary HD, in which startup failed, and primary HD came out with this: "hard disk 1 (303) Quick '. What can I do to solve this problem, if anything, or just to save what I can from my old files?

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  ************************************

  Concerning access to the data on this HARD drive, here are some options you can try.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• Windows 7 laptop stuck at "Starting Windows"

  I'm unable to connect to the laptop, because it gets stuck at "Starting Windows". Kindly help

  Try the last known good configuration:

  http://Windows.Microsoft.com/en-GB/Windows7/using-last-known-good-configuration

• Laptop stuck on Windows 7 loading screen, beeps continuously

  Acer Aspire 4810 t / 4810 t / 4410-T series
  Windows 7
  2 years

  My classmate laptop is stuck at the loading/starting Windows screen 7 (the black) and it beeps continuously (until I turn it off). This happens only on NORMAL startup, as reboot or adequate powering.
  I have already put the RAM, but the problem persists. I noticed the HARD drive light flashes in conjunction with beeps so I tried to get that too, but it does not solve the problem either.

  Any other ideas? Should be replaced already?

  Video: http://youtu.be/3s4Uj8IwnVA

  EDIT: my classmate said he replaced the hard drive and it solved.

  Hi again,

  I have just solved the problem, the "F12" key on the keyboard of the laptop has been taped...

• laptop stuck on the spinning circle during the upgrade to windows 8.1

  Hello. I have a HP pavilion g6 and today I tried to update windows 8 to 8.1, and he spent the screen where it says put in place 1%... 2 %... Etc... Thereafter it restarted when he hit 100% and now its deadlock on the rotation circle thing. The only thing on my screen is the HP logo and the circle of rotation. His lasts four hours and I decided to just hold the power and restart. When it restarted, it went backward the same screen with the hp logo and the circle of rotation and I left it for a few hours ANDS nothings happening. I took out the battery and held down the button of power and then put the battery back in the hope that he will return to normal... but in vain her back on the same screen. Help me please

  EDIT: I can't do anything right now on my laptop. It is stuck on that screen and it's like my laptop was 'bricked' or something. All I wanted was windows 8.1 :(

  Hello

  You must disconnect external devices such as an external hard drive, printers or the webcam with the exception of your monitor, mouse and keyboard.

  Feel free to get back to us if you need further assistance.

  Thank you.

• Laptop stuck in an infinite loop "install".

  My HP laptop acted until tonight while I was using it, so after trying simply to cold restart for a few minutes, I gave up and decided to just refresh everything. However, the preparation part took longer that it was supposed too once again, I did a cold reboot to see if the process would go faster. But now my phone is stuck in an infinite loop where it indicates an unexpected reboot or error happened past that he cannot continue the 'install' and must restart so it can relaunch the 'installation '. However it is done a few times and each time, the same error appears. I tried searching how to solve this problem, but did not see anything and that's the current situation, I can't use it for stuff I need the laptop for. I don't know what to do!

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that your notebook has been slain in the loop of the installation. I will certainly help you to question.

  I suggest you refer to the suggestion of Reda Singh replied on 30 June 2015 from the link below and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-81-wont-start-correctly/211c93ea-8ce1-430B-9ca1-1f7b245cf0ca

  Hope the helps of information.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• HP 15.6 laptop "touch screen: laptop stuck in the loop of continuous factory reset

  I brought a laptop that has been the view at Sam model yesterday.  I tried to do a factory reset, but once he gets to "Windows Setup" it makes a continuous loop.  It will start at 64% go to 100%, then restart.  When it turns on, it is always 'Windows Installer' and goes right to 64% and then 100%, then restart.  I started at 22:45 (28/07/2016) last night and it's always the same.

  What can I do to stop the program?

  Hey @GwenC,

  Please try the steps prescribed by my colleague. The path to resolution would play a HP System Recovery. You can learn more about this process here. If you have not already created a recovery media, I advise you to contact our technical support team here: (contact) / 10282847/model https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-Gaming-15-ak100-Notebook-/10402445

  The alternative who get the computers at the point of purchase for a trade (if you are still in their chronology of return).

  I hope this helps. Good luck!

• laptop stuck at clear blue screen without a mouse

  I have a laptop with Windows 8.1 17 envy and I tried to change the display settings after an application of the mouse and all the icons on the desktop disappeared trying to access the Task Manager, but the screen just switched to a light blue color with no error message. Ive tried restarting, but who did not actually all that someone knows what to do?

  I went to safe mode and updated the pc, it seems to have worked, and I didn't quite lose

• Compaq 14-a000: laptop stuck in shut down/boot loop

  The main problem I encounter is that I accidentally turned off my computer while he was setting up Windows.
  Now, as it is, he is stuck in a loop of the ignition, update of the screen showing HP with small points of buffer circling at the bottom, cutting and then reappear.
  Then it will move to the Windows Setup screen and it's 64% finished,.
  Then turns off.
  
  He continues to repeat this and I cannot understand how out of the loop, and it happens so fast too.
  
  I just turn it off completely and I try to keep it's cool, but I'm not sure what it does beyond this point other get rid of him.
  Help, please.

  It's time to use the recovery media that you have created now...

  You can use it to access Windows system restore and restore the operating system to a recovery point dated before that happened.

  System Restore is safe and reversible.

  Take a read of the paper web followinbg. The methods apply to your operating system.

  http://pcsupport.about.com/od/Windows-8/a/open-Advanced-startup-options-Windows-8.htm