The disk set installation problem

Similar Questions

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• The hearing Adobe installation problem: case sensitive Volumes not supported.

  Hello

  I'm trying to assessment of 30 days of hearing, to see if he's not in my workflow. I'm for the installation point, and the Adobe program manager reported that it does not support case-sensitive Volumes. It tells me to select another volume. However, it is a laptop computer with a disk. Now, I could erase the disk, reformat the drive into 2 partitions, a modern and archaic for Audition play one - and reinstall all the 900 GB + on it, but that would take a few days. I don't want to reformat and partition my drive for a program I am trying simply to try before you buy.

  My time is running out. So, unless there is a reasonable and fairly quick resolution for this I will continue to look for an editor who can work for me.

  Please visit: http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html

• Info from the disk set my my hard drive XP-3. Disk does not run.

  I have photos of ship models made by the husband and I would like to install on the computer of cn.  Put in the disc, but nothing happens.  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What do you mean by "Floppy", it's a floppy disk, a CD or a DVD?

  The last two types and relevant actions of the autoplay should be controlled by the Panel\AutoPlay control settings in Windows 7.

  All three discs is accessible via Explorer and double left click on the drive icon.  You can then copy and paste the files.

  If you have XP, then this is where you post your question.

  Maybe it's the Vista Forum you should be in the XP Forum.
  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  How to ask a question
  http://support.Microsoft.com/default.aspx/KB/555375

  Take a look at these if you have XP.

  My computer, right click on the CD ROM drive, the AutoPlay tab and set the default action for each type of CD.

  http://kbAlertz.com/967715/correct-Autorun-registry-enforcement-Windows.aspx#top

  AutoPlay, see Kelly Theriots site for several corrections and changes.
  http://www.kellys-Korner-XP.com/xp_abc.htm

  330135 - the AutoRun or AutoPlay feature does not work
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;330135&FR=1&PA=1&SD=HSCH

• the new realplayer installation problem, it says that I don't have access to the registry.

  Im trying to install the new realplayer from real.com, but the web installer, or one complete, it gives me this error.

  "You currently don't have administrator access to the Windows registry. "Please see you system administrator to install RealPlayer.

  Although im the admin of my pc, and I can change the registry. I tried with UAC enabled, in all kinds of safe mode, but it does not always work with this message.

  im running windows vista ultimate sp2. I had no problem with the installation of the programs, with or without UAC.

  I can perfectly to install older versions of the player, but not the new.

  I contacted the Real, but they couldn't help me.

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Well I tried that, too.

  About 2 days ago, I did a clean install my OS, and the player installed perfectly fine. but when I tried to repair the installation of real player, it has not yet.

  so I guess there must be a problem with real player and not with my pc.

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

• Download the Sierra and installation problem

  Downloaded Sierra to the MacBook Pro.  But do not then proceed with the installation. Computer restarted manually, but that has not caused to install either. How to proceed now? Thank you.

  You should be able to find the installer of Sierra in your Applications folder. Click the installation icon and the installer will start.

• The Vista SP1 installation problems. 0xc0190036 error code

  When I try to install SP1 for Vista, I have a code for loop (0xc0190035) restart in GADGET. XML file.  I also cannot install security update for Windows Vista - KB938123, which is an update to the gadgets in the sidebar. He get an error code of 8007643. I did all THE procedures in help to include reinstall .NET.  I totally uninstalled all the gadgets of my computer in case there's a wrong code or something else in there.  I have VISTA Home Premium build 6.  It is an OEM copy.  I installed KB947821 checks if SP1 is ready to enter into the computer and all right because it will without asking for updates.  Can someone help me?

  Jim Tinsley,
  Here are some steps to start with.  First to perform a clean boot on your system.  Then, run the following:
  Disk error checking
  System File Checker

  Then Download SP1 and try to install it manually.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not enough free space on the disk caused PC problem... NEED HELP!

  I originally had Windows XP preinstalled on the PC; recently added Windows7, but updates seem to care too much disk space. Received message "not enough free disk space. This caused my system to lose its RESTORE point. Remove Windows 7 & moved to other files on external hard drive. PC now runs very slowly and System Mechanic is unable to correct. What can I do to restore the functionality of PC? System Mechanic (that I pay for every month) had me make a map of my PC system and send it to them. They said they couldn't help me and I need to contact Microsoft Support. MS supports has a significant burden for assistance. What can I do to get my PC back to normal? Help!

  System Mechanic is a registry cleaner. Registry cleaners offer significant benefits and have the potential to create system errors rather cannot be solved by reinstalling Windows and all that that implies.

  Sometimes you can tell a lot about a system of a Disk Defragmenter report. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• Laptop Extended CS6 on the new computer installation problem

  Hello.

  I hope someone can help me understand how to install CS6 on a new computer. I remember that I first bought CS5 (with a CD), then passed to the CS6 in July 2014, a download, then download and install CS6 extended in February 2015. I don't remember if Extended CS6 was an upgrade ($399?).
  

  I have disabled the older CS5 and CS6 on the laptop, went to my Adobe account > orders, downloaded and installed Extended CS6 and glued in the serial number. I received a message stating: "it is a valid serial number, but it is not a product qualified reference. Please select a product. "In the drop down menu, Extended CS6 was not an option.
  

  I think I need to first install CS5 from the CD, and then upgrade to Extended CS6. However, when I try to run the CD on the new laptop (a Dell 7710, running Windows 7 Pro) I get a message that the Installer failed to initialize. If I try to run the CD on the old laptop (a Dell XPS 16, also running Windows 7 Pro), Setup initializes. So, apparently, the issue is specific to the machine. Anyone has an idea as to how I could get the CD to work on the new machine?

  You need not install CS5. Simply enter the serial number when he asks the CS6 Installer.

  What he wants is not a "qualified" product, but a qualifying product. That's the one that you upgraded.

• Version the most recent installation problem

  Yesterday, everything was fine, I watched a lot of videos with my flash drive, then a video told me I needed to update my flash player to display... So I downloaded, got the above logo and the message below on the download page, confirming the version 10... has been installed, all right, but nothing was working, no player.

  I did the research, followed the instructions of troubleshooting:

  Uninstalled:

  Use: Windows Vista Business, Internet explore 8

  I went to Windows\System32\Macromed\Flash, clicked right FlashUtil10g_ActiveX.exe, Ran as administrator, uninstalled, makes

  Restarted

  Disabled Norton anti-virus and firewall, checked Java enabled and activeX prompts according to the instructions

  Went to http://www.adobe.com/go/getflashplayer_fr done download

  The download manager said installed successfully, then I get the pop up:

  MessageBox: 12582960, 'the version of Adobe® Flash® Player ActiveX that you are trying to install is not the most recent version.

  Please visit http://www.adobe.com/go/getflashplayer_fr for the latest and most secure version. »

  and, I do not see the above logo and the message below on the download page so it is not installed.

  Here are the details of the log of the installation... Please, I Redid the entire process at least 8 times last night and today 3 times NO LUCK, please someone HELP I can not work without the flash player!

  Thank you

  Start the main Section - Date = 06/04/2010 (Friday)
  Time = 15:07:38
  CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1).
  Call: 441
  Security control
  Call: 116
  Call: 1191
  File: overwriteflag = 1, allowskipfilesflag = 2, name = "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\UserInfo.dll ".
  File: written 4096 "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\UserInfo.dll ".
  Name CheckAdminPermissions = xxxxxxx
  Call: 1191
  File: overwriteflag = 1, allowskipfilesflag = 2, name = "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\UserInfo.dll ".
  File: skipped: "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\UserInfo.dll' (overwriteflag = 1)
  Account type CheckAdminPermissions = Admin
  Jump: 148
  Call: 148
  Call: 74
  Jump: 111
  GetWindowsVersion-

  CheckSupportedPlatform - OS = Vista

  Call: 447
  CheckFPPermissions
  Call: 74
  Jump: 111
  GetWindowsVersion - Vista

  Call: 1191
  File: overwriteflag = 1, allowskipfilesflag = 2, name = "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\fpinstall.dll ".
  File: written 8704 "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\fpinstall.dll ".
  ObjectExistsAndIsOwnedBySomeoneElse = 0
  Jump: 490
  Exec: command=""C:\Windows\system32\Macromed\Flash\FlashUtil10e.exe "-uninstallUnlock".
  Exec: createprocess failed (""C:\Windows\system32\Macromed\Flash\FlashUtil10e.exe"- uninstallUnlock")
  MessageBox: 12582960, 'the version of Adobe® Flash® Player ActiveX that you are trying to install is not the most recent version.

  Please visit http://www.adobe.com/go/getflashplayer_fr for the latest and most secure version. »
  Call: 1191
  File: overwriteflag = 1, allowskipfilesflag = 2, name = "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\NSISArray.dll ".
  File: written 17920 "C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\NSISArray.dll ".
  Delete: DeleteFile ("C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\fpinstall.dll')
  Delete: DeleteFile ("C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\NSISArray.dll')
  Delete: DeleteFile ("C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\System.dll')
  Delete: DeleteFile ("C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\UserInfo.dll')
  RMDir: RemoveDirectory ("C:\Users\? \AppData\Local\Temp\nsq4DA6.tmp\')

  Hello, SD, somehow between the installation of the first and the second, it seems that you have installed a pre-reissue/beta version. To uninstall this version, you must use a special uninstall program. Everything that you have done it correctly. Go to this site and the page down to "Uninstall", follow the instructions and do not forget to Reboot (restart) when finished.

  http://labs.Adobe.com/downloads/flashplayer10.html

  You can download the FP for IE here Installer on your desktop:

  http://fpdownload.Macromedia.com/Get/flashplayer/Current/Install_flash_player_ax.exe

  When you have finished uninstalling and before running the installation program, close all browsers, disable all applications that can run in the system tray, messengers. In other words, do what you did before installing.

  When you are done, reboot and retest your PS and test any Web site.

  If you have any questions, just after.

  Thank you

  eidnolb

• The 14 elements installation problems

  I bought a copy of 14 items at Staples.  When I try to install, the password will not check.  I run a new mobile Windows 10 as an administrator, but for the password letter keys don't seem to work.  Keyboard works fine on all other programs.  Any thoughts?

  First Elements or Photoshop Elements?

• Disqualification - data on clients of the Service Pack; Installation problem

  Hello

  I managed to download and get the CD pack.

  I can see the projects in realization. But when I try the kickoff of the HAND - initialize data reference job I get the error "an error occurred creating parameters of working language [A] initialize: cannot load the process [A] initialization of the language settings (Code: 207, 103)"»

  I tried to perform the work within the Director and also in the Console of the server with the same message

  Any help much appreciated.

  Concerning

  
  SARB

  Hi Mike,.

  You probably have not imported the dxi fully. Did you get errors when importing the project? Have you extracted config.zip provided in the distribution on the existing config directory? If this isn't the case, then it will miss the widgets and gadgets.

  Also, if you want the off-field box settings language then you don't need to use the Initialize project.

  Kind regards

  Nick

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• The LaCie in Win XP installation problem

  I have trouble to configure access to a LaCie Network Space MAX, a 2 TB network drive connected to an ethernet on my provided FIOS Actiontec router port.  I am running Windows XP Pro SP3 and have set up a local network by following the procedures described in "Windows XP part."  My problem is that the LaCie supplied installation application, Network Assistant, can't find the new drive on my network.  I get an error message indicating "LaCie network disk is not found."

  The new drive is accessed using this LaCie Support called Server Message Block by clicking Start > run and entering its network address, which is \\192.168.1.4 which brings the player in Windows Explorer.  I can now access the reader in having created a virtual drive 'L' with the address \\192.168.1.4\OpenShare (where OpenShare is the name of the shared folder on the LaCie hard drive) and by implementing a similar entry in my network places.
  I have also set up access to the LaCie Network Space MAX on my MacBook Pro (running OS - X) by using the LaCie Network Assistant with no problems.  In the Mac Finder window, the LaCie appears as a server (disc case) accessible via Network Assistant and a disk with the files and folders.
  Any ideas on how to get the LaCie Network Assistant to recognize the server/LaCie or what the cause of the problem?  Without Network Assistant runs on the PC, I am unable to access the private on the LaCie shared folder.

  Hi MikeAnon,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.