"the drive of your computer is the error message full outlook express 080004005,183.
I get the following error frequently when trying to exploit my system to outlook express? "the drive of your computer is the error message full outlook express 080004005,183.
Then set up a new identity. If you can not start OE, then see www.oehelp.com/OETips.aspx#7 and you probably need to remove folders.dbx.
Steve
Tags: Windows
Similar Questions
-
original title: Outlook Express
The connection to the server has failed. Account: 'pop.4wbi.com', server: 'mail.4wbi.com', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E is what I get every time I try to send, transmit, or answer
I have outlook Express 6, Windows XP, I would appreciate any help you can give me
I don't know what I was supposed to check on the Forum, Feedback & product
Thank you, Karen
At first glance, it seems that a few things wrong with the settings you have for a server outgoing (SMTP). I think that Westphalia broadband uses mail.4wbi.net as the incoming and outgoing mail server, not pop.4wbi.com (note mail instead of pop ) and .net instead of .com. These are the servers listed in this article:
I'm not ensure that these settings are correct. Rather I suggest to find the page to set up your own mail server and use the parameters described in this. -
recover the deleted messages in Outlook express
Original title: recovering deleted emails Inbox
while trying to remove an annoying bing/inbox.com search engine that I managed to remove all my emails from the Inbox Outlook Express except todays. Any chance of recovery?
In addition to the other reviews, if the messages have been deleted from the deleted items folder or shift-deleted from the Inbox, then my DBXpress program (www.oehelp.com/DBXpress/) also has a 'recovery mode' option which will recover the deleted messages in the folder, but it cannot have been compacted. If its compacted, then deleted messages are on hard disk clusters that are likely to be replaced. Also, the text of the emails can be successfully recovered, as 4 bytes on each 512 gets overwritten when you remove, then images and attachments can be recovered in this way.
Otherwise see Bruce's suggestions. DBXpress has the extract from disk feature that could retrieve the messages intact.
Steve
-
Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?
It would be helpful to post what the screen says.
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
-
A problem with the hard drive of your computer
Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?
Hello
Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.
See you soon.
-
Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.
Hiya,
I have recently installed Windows 8 Pro, installed all of my usual applications etc..The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;"Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.I can't find a way to properly uninstall the graphics driver.At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.
Hi guys,.Looks like this isn't just me.Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.Information system;Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200CPU: AMD FX-8150 eight physical coresGPU: ASUS NVIDIA GeForce GTX 560 TIMain hard drive: OCZ Vertex 3 120 GBIt may be usefulEdit: Still not falling down, 11/02/12, 4 days
New edition;
If you still receive the error message, try the following steps;Has. try to perform a clean installation of the driver.Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.B. close all other programsIt is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.More information can be found below -
Original title: driver error
They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.
Here is a list of the help page instructions:«' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "-Your program and Version: don't know what to put here.-Your operating system and Version Windows 8-Your browser and the Version of Google Chrome Version 28.0.1500.72 m-All soft/hardware you have recently installed or removed - None.-Any recent changes that have been made to the system - None.-What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.Specification of the computer if necessary:HP - Sleekbook 15.6 ENVY "AMD - processor A10-DDR3 SDRAMWe need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.If you are overclocking stop. (chances are if you are unsure if you are, you are not) aTo allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".The procedure:* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.* Zip up the copy (compress)* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.Link to find out how to download below.To ensure the minidumps are enabled:* Click Start, in the search box, type: sysdm.cpl, press ENTER.* On the Advanced tab, click Startup and recovery... Settings button.* Make sure that automatically restart is unchecked.* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.* OK your way out.* Reboot if changes have been made.Please also run MSinfo32 and download the output as well.To run MSinfo32 please go to start > run > MSinfo32Go to 'file', 'save' and download the PDF is saved with the DMPSystem specs are extremely useful then please include everything you know.
Blue screen view and that crashed are often wrong and should only be used in case of emergency...
You can learn more about BSOD here
Team Zigzag3143.com -
Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
Mylenium
-
My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.
and also installed the latest driver by using the Software Update Wizard software.
That would not have been the best idea... but it is unlikely that the cause of your immediate problem.
The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked. Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019
I suspect that what really happens is that the driver has become corrupted. In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new. Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case. In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.
If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.
Use the free version, not the free trials of "pro" versions Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.
Do not run the scans at the same time. Each scan will take a while. Start one and go do a non-it chore. Once the scan is finished, leave the program to deal with anything it finds.
Once done, you can keep or uninstall programs, or both. If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.
Uninstall all software from Dell to control panel > Add / Remove programs
Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904
Close all running applications (anything with an icon on the taskbar).
Run the Fixit routine. Note: The routine Fixit has two modes, light and complete. It will run in full mode when you check the box "Reset the spooler to print on values." This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode. If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked). This may work anyway. You must restart the computer after you run in full mode; you need not restart after the Chase mode.
After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software. You will be asked to connect the printer to a suitable place. You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490
-
Original title: The system has recovered from a serious error-
The system has recovered from a serious error-
When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.
What is the solution for this?
Hi Sandeep,
Thanks for posting your question in the Microsoft Community forum.It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.I may need a few more details to better understand the issue.Method 1: I suggest following the steps listed in the article and check if it works.Error message: the system has recovered from a serious problemMethod 2:
I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.You can see the article for more information:A "System has recovered from a serious error" message after every restart.Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?
I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means. Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?
Thanks, I'd appreciate any help.
It is always useful to have the complete error message without paraphrase.
It also helps to identify the version of Windows you have, including service pack.
And it helps to give the manufacturer of the printer in addition to the model. In your case, I guess you have a Dell printer. I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.
Why you try to configure the USB port? It cannot be configured - you've discovered. It's normal.
It's quite strange that an iTunes installation would have had something to do with the printers. What printer was made by default after installing iTunes?
You say you have tried another USB cable. Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?
I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.
Don't skip step 4. After step 4 and step 5, follow these steps:
Important: If you have a Lexmark printer, skip the following
Open a command prompt window (start > run > cmd > OK)
type the following in the black command prompt window, and then press ENTER after each linenet stop spooler
dependent on the spooler of sc config = RPCSS
net start spooler
outputNote that there is no space before the = and there is a space after it.
The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False
-
Original title: My Vista system will not back up my data to an external drive. I get the error message 0 x 80070002. I obviously don't want to lose any data on my hard drive. What can I do?
I'm running Windows 9 and I'm trying to save on a Western Digital 1 .5TB external drive.in Vista
Hello
There is no windows 9 Microsoft
There is IE9
Read this vista information
see if this information helps you
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
If you have problems, it's in here is a forum for microsoft specifically for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Original title: can't access my BIOS, but blocked on select boot device
I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.
Hi Ryan,
Please contact Microsoft Community. I will surely help you this question.
To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?
Method 1:
You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.
Method 2:
If the problem persists, I suggest you to return the item and check if it helps.
What can I do if my laptop Windows 7 or Windows Vista does not start?
http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717If the problem persists, I suggest you to contact the Toshiba Support for assistance.
http://support.Toshiba.com/support/home
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
Qosmio X 870-Blue-Ray driver update ends with the error message
I recently received a message from Tempro for updating my Blue-Ray disk driver. Downloaded, extracted and installed. Error message:
....................................... Fix Project Setup Wizard
... "The build version of the source is not build target.
Installation was not completed. At each new start (re-boot"I am again asked to install the new version of the wheat - Ray Disc driver.
D:\nerladdat\Toshiba\BlueRay\Nerladdaat fran hemsidan\bluraydp-20130117155646
extracted file is: TC30526100B.exe
I use a Qosmio X 870-11 G 5C370203Q serial No.
Grateful for the help to solve them.
Goran
What version of Toshiba Blu - ray disc player is installed on your laptop?
Take a look at this thread
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71240* MasterG wrote: *.
+ The error message appears because the Toshiba Blu - ray disc player is already updated. +
+ Generally after the update, the version of Toshiba Blu - ray disc player should be * 1.0.3.196 * +.+ Before the update, my BD from Toshiba player was 1.0.0.929. After the update, I've got v1.0.3.196 +.
-
reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.
Unplug your backup disk, restart, and try again.
Maybe you are looking for
-
Chrome, for example, does not perform a DNS lookup if the entry is not a valid Web site, instead, it searches in the default search engine. I think that if the bar URL have behaved in a similar way, it would increase by many user experience. I really
-
HP monitor does not display "DVi signal.
My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTO
-
Satellite Pro A100 (PSAAC) - freezing for a second unknown device
Hello I have recently reinstalled Windows on my computer, after installation, is a problem. With an interval of 10-15, my computer hangs at about a second - the computer reacts to the entry, and if a sound is played he repeats again and again. I don'
-
Printer to skip every third line
My Deskjet 2050j skip every third or fifth line based on the document that I print. I've tried all sorts of cleaning of the printer have options, I refilled the cartridge, tried printing in three different computers and still have the same problem. T
-
Low memory - function markAsRecoverable() management
Hello world I'm trying to implement the management of low memory to my request. According to the white paper, we should call markAsRecoverable() inside the freeStaleObject() after to remove any reference. As a result, he has set an example like this