The email returned to me by the master of post that I didn't send.

Similar Questions

• Firefox prompts you to enter the master password so that there is no form on the page

  I open Firefox and visit: http://twitter.com/astro_paolo
  Although there is no form on this page, Firefox invites me to enter my master password

  A quick glance at the page source shows that there is a hidden login form (left:-9999px ;) on this page.)

• I was contacted by the company am saying that my computer is sending spam. Are they legitimate?

  Am say that they are agents of microsoft and that my computer is infected with damaging files that could harm my computer from web sites and they want to guide me through a repair.   Is this likely to be true.    I'm suspicious as they called me on my home phone number.

  They are FAKE and SCAM for sure. Because Microsoft won't call you for support unless you contact or fill out a proof of support and ask them to call you back for help.

  I suggest you take a look at:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

• Changing font in Master pages so that it changes the rest of the model?

  I can't change my font in the Master pages so that it remains the model of the effect. I have to go through each page and change the font. I just want the body a certain paragraph font and I don't know how to do this. I don't know if I explained my question pretty well.

  Yes, first mouse righ click-to-edit you stye paragraph

  

  Then change your settings

  

• How can I stop to returned emails that I did not send?

  I started to have returned, could not send emails that I didn't send. They are different e-mail addresses, especially in Italy. How can I stop this please?

  http://ask-Leo.com/someones_sending_from_my_email_address_how_do_i_stop_them.html

• "@specTypeName @" placeholder for extensibility of the Email does not work for the master specifications

  Hi all

  • I installed E-mail Feature Pack 4.1 extensibility 6.2 PLM.
  • I use "GSMEmailFileBasedVariablesFormatPluginFactory" to send e-mail notifications when work flowing from one status to another.
  • I am successfully able to generate notifications by e-mail for all GSM specifications with the content specified by me except the master specifications.

  "@specTypeName @" placeholder for extensibility of the Email does not work for the specifications of the master.

  Can you please help me solve the problem?

  FYI,.

  ' @specTypeName @ ' placeholder works in all other GSM specifications.

  Thank you

  Nefertari

  For the resolution of this problem, please see the following knowledge base document:

  Document 2079386.1 - Notifications by email for the specifications of the master only lack the Type of specification field

  Thank you

  Stephen, Oracle Support

• subquery returns no row in the main query, but hard returns the value of the master query

  Oracle 11g, Solaris SPARC 64-bit:

  This is the master query: its not to return all the lines

  Select count (*) in the sadmin.usr_mods where to_char (ts_id) in ((select to_char (rtrim (ltrim(TS_MODULES,','), ',')) in the sadmin.usr_rfc where TS_KINTANA_PACKAGE_NUMBER = '123' and ts_projectid = 3));

  COUNT (*)

  ----------

  0

  But wherever if I use subquery only returns he lines:

  SQL > select rtrim (ltrim(TS_MODULES,','), ',') from the sadmin.usr_rfc where TS_KINTANA_PACKAGE_NUMBER = '123' and ts_projectid = 3;

  RTRIM (LTRIM(TS_MODULES,','), ',')

  --------------------------------------------------------------------------------

  49,54

  If I use these values as hardcoded to a select master it will return 2 rows:

  SQL > select count (*) in the sadmin.usr_mods where to_char (ts_id) in ('49 ', ' 54');

  COUNT (*)

  ----------

  2

  TS_MODULES datatype is CLOB

  TS_ID datatype is set to number

  Help, please

  with

  usr_rfc as

  (select 3 ts_projectid, 123 ts_kintana_package_number, to_clob(',49,54,') ts_modules

  of the double

  ),

  usr_mods as

  (select ts_id 49 Union double all the)

  Select 50 in all double union

  Select double 54

  )

  Select count (*)

  of usr_mods

  where to_char (ts_id) in (select regexp_substr (to_char (rtrim (ltrim(TS_MODULES,','), ',')),'[^,] +', 1, level))

  of usr_rfc

  where TS_KINTANA_PACKAGE_NUMBER = '123'

  and ts_projectid = 3

  connect by level<= regexp_count(to_char(rtrim(ltrim(ts_modules,','),',')),',')="" +="">

  )

  COUNT (*)
  2

  Concerning

  Etbin

  Select count (*)

  of usr_mods

  where instr ((select ',' | to_char (rtrim (ltrim(TS_MODULES,','), ',')) |)) ','

  of usr_rfc

  where TS_KINTANA_PACKAGE_NUMBER = '123'

  and ts_projectid = 3

  ),

  ',' || TO_CHAR (TS_ID) | ','

  ) > 0

• Can not get the Master Collection - lost email

  I got the Master Collection for College, but I can't find the account that I have activated. Again, I have the serial number, but no way to get it back. I desperately need installed but I was looking for a way to install it for a few days with no luck. How can I get that back? I think it's the digital version.

  I found an email that I think was that I needed, but it had been disabled non-use without hope of reactivation.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• After you type the master password in session can force type master password once again without ending the current session and start new session?

  Sometimes after using the password to access an account during a given session of firefox, I want to "repeal" this ability of automatic access (i.e. require type the password again once) without having to put an end to the current session and restart firefox.

  It's nice to only have to type the password once per session, there are times when after launching an action that I would let the browser unattended for a short period but to prevent others to access sensitive information on other sites if they can't my master password. Note that this is not the same thing as "locking the browser. Currently, the only way I know to force it is to kill the session and restart the browser but it's not very satisfying if I really want to stay connected (allowed) to a particular site. I hope that adding a button in the Security tab "requires the master password for the current session" would be a simple solution to implement? Thank you for your attention.

  You can connect from the software security device (e.g. click Cancel in the dialog box display the passwords) to force them to return to the MP once more.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Tools > Options > advanced > encryption: Certificates > safety devices: software security device: Logout button

• Restore the master book record

  Hello

  I have a MacBook Pro and installed windows via bootcamp 10. Now, I wanted to created a partition which can be read/written by windows and mac software. I created a partition in the format exfat under OS X. I couldn't write on this partition under windows, so I wanted to delete the partition exfat and create a new Windows.

  It seems that I deleted the wrong partition, because only 10 windows then begins. If I press the CMD key during startup, only 10 of Windows appears. I suppose that the Master Boot Record does not work. Is it possible to repair the master boot record?

  My time Machine backup seems to be corrupted too and does not work.

  Thanks for the help!

  Note that if you use Boot Camp Assistant to create your Windows partition, you cannot create additional partitions. You can have the OS X and Windows partition. Create a third partition causes the transition from Windows to be of any use.

  According to the current state, you must start the computer in the HD Recovery, disk utility open partition all the drive back to a single partition, then reinstall a new copy of Mac OS X.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Mistakingly, I put a copy of xp family on my slave instead of master disc drive. On the master drive, I now have a folder that is 25 concerts, which doesn't let me delete or format the drive either.

  Original title: I mistakingly put a copy of xp family on my slave instead of master disc drive.
  Perhaps I will learn one day someone ask first.

  Mistakingly, I put a copy of xp family on my slave instead of master disc drive.  And if this wasn't enough, so I thought it would be easier to remove the program on the master drive and keep the slave for program files and the master for the storage of the doc, movies. etc.  Probrably you know there not well turm.  On the master drive, I now have a folder that is 25 concerts, which doesn't let me delete or format the drive either.  Any suggestions?

  Hello

  1. what exactly happens when you try to delete the folder that is located on the master drive? You receive an error message?
  2. What is this folder?
  3. what happens when you try to format the master drive? You receive an error message?

  After return the correct error if you receive one.

  If you want to than Windows XP on the master drive only then change the slave to the master disc or install XP on the master drive.
  To change the master or the slave settings contact the hard drive manufacturer or consult the manual of hard drive.

  Reference:

  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• install the new drive in slave. you want to transfer the OP for slave to the master drive. The slave to the master change and OP work, as did the master drive.

  Hello, I install a new drive (slave at first) to be the master, after I transfer of windows on them. How can I transfer the data to the new disk that the operating system runs when the slave returned to be the master drive?

  Go to your NEW Hard Drive from the manufacturer website.

  They normally have available software cloning to transfer the operating system on a new hard drive.

  See you soon.

  Mick Murphy - Microsoft partner

• Manually insert a fixed set of detail records in the master record is created

  Hello

  I have a requirement for the creation of several detail records manually when a new Master Record is created.  I'll use information from a few fields of primary record that is created when you create the detail records.  To do this, I put the INSERT statements in 'before Insert trigger"in the main Table (to insert records from the secondary table) . The problem arises when the trigger is trying to insert the record in the secondary table because of the Foreign Key constraint on detail record.  Since the master record is yet to be established, it will not INSERT on detail table and raises foreign key constraint violation.

  One way to overcome this is by simply creating the master record.  And in the master report, providing a button (link column) and execution of a PL/SQL procedure that creates the detail of records.

  I just wanted to know is there a way to do this when creating main drive itself?

  Here's what I defined under master table before creating the trigger-

  CREATE OR REPLACE TRIGGER bi_master_table
  BEFORE INSERT OR UPDATE ON "MASTER_TABLE" FOR EACH ROW  
  DECLARE
  v_master_pk_column NUMBER;
  BEGIN   
    IF INSERTING THEN 
      v_master_pk_column := master_pk_column_seq.NEXTVAL;
    :NEW.master_pk_column := v_master_pk_column;
  
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (v_master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
    END IF;
  END;
  
  

  Note: Detail table key primary value automatically filled using his own trigger and sequence.

  Thank you and best regards,

  -Anand

  Hi Anand,

  before the trigger for insertion to complete the primary key of the main table.

  CREATE OR REPLACE TRIGGER  bi_master_table
     before insert  on MASTER_TABLE
     for each row
     begin
      SELECT master_pk_column_seq.NEXTVAL INTO :NEW.master_pk_column FROM DUAL;
     end;
  /
  

  Trigger after Insert to insert the record in the detail table,

  similar to this

  CREATE OR REPLACE TRIGGER  "DETAIL_TABLE_INSERT"
  AFTER INSERT ON MASTER_TABLE
  FOR EACH ROW
  BEGIN
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (:NEW.master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
  END;
  /
  

  or you can implement the same writing Pl/Sql procedures without using triggers.

  Check this Doc contains example with or without the help of relaxation: https://markhoxey.wordpress.com/2013/08/20/returning-into/

  Hope this helps you,

  Kind regards

  Jitendra

• Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! So I'm not

  Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! I'm not able to buy a product! Could you help me, please?

  Quit Adobe Creative Cloud app.

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, restart the Adobe Creative Cloud app and check.

• dbenv-&gt; txn_checkpoint can't finish the master HA

  BDB dear gurus,.

  I tested my HA with bdb4.6.21 api base code. Every minute, I started a pthread dedicated for control points. The thread checkpointing feature is as below:

  for (; sleep (WRITE_CHECKPOINT_INTERVAL)) {}

  If ((ret = dbenv-> txn_checkpoint (dbenv, 0, 0, DB_FORCE))! = 0) {}

  trace (TRACE_LEVEL_INFO, "%s: write checkpoint failed for %s.\n", __FUNCTION__, db_strerror (ret));

  }

  trace (TRACE_LEVEL_INFO, "% s: writing checkpoint %s.\n", __FUNCTION__, db_strerror (ret));

  RET = dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE);

  If {(retired)

  trace (TRACE_LEVEL_INFO, "% s: log_archive failed to eliminate newspapers %s.\n", __FUNCTION__, db_strerror (ret));

  }

  }

  When I run my code without env DB_INIT_REP Pavilion, the control point and autoremove works. And I got the track ' write the successful return of control point: 0 ".

  But when I run my code with DB_INIT_REP set and a single master, a replica, it seems that the function txn_checkpoint call never returns. Backtrace from gdb to the thread of control point can be seen below:

  #0 0x00007fa59f92d033 in select() to... / sysdeps/UNIX/syscall-template. S:82

  #1 0x00007fa59ff128c5 (/usr/local/BerkeleyDB.4.6/lib/libdb-4.6.so __os_sleep)

  #2 0x00007fa59ff1bd94 (/usr/local/BerkeleyDB.4.6/lib/libdb-4.6.so __txn_checkpoint)

  #3 0x00007fa59ff1c0f0 (/usr/local/BerkeleyDB.4.6/lib/libdb-4.6.so __txn_checkpoint_pp)

  #4 0 x 0000000000404288 in xxx (arg = 0xc0d010) at xxx.c:1776

  #5 0x00007fa59fc06e9a in start_thread (arg = 0x7fa59bda4700) at pthread_create.c:308

  #6 0x00007fa59f933ccd in clone () to... / sysdeps/UNIX/SysV/Linux/x86_64/clone. S:112

  #7 0 x 0000000000000000 in? ()

  How can I proceed?

  Thanks, Min

  I guess that your thread of control point is executed on your master.

  The call to __os_sleep() is planned at a control point on the master. Control points can take a long time. When a master does a control point, registration for this control point is sent to the customer and the customer must also make a point of control. It is possible that the customer might have different hardware or features I/O causing sound control to take much longer than the control point. So we wait for extra time after a master control station to allow customer checkpoint complete. This allows to improve the ability of the client to follow the master.

  You can control the amount of overtime that wait us after the master control with the time-out DB_REP_CHECKPOINT_DELAY point that you can set with the call to DB_ENV-> rep_set_timeout(). The default value for DB_REP_CHECKPOINT_DELAY is quite long - 30 seconds. If you make the control points every minute, you probably want to reduce this time-out value.

  Paula Bingham

  Oracle