The error queue will not fill

Similar Questions

• printer does not print. the connections are fine. onw document in the print queue will not be deleted. Need help, please no error messages given

  I checked the print queue.  I tried to delete the document does not have several times without success.  There is no error message given.  The printer is just the print requests in the queue with answer oout.  Nothing will get the printer to answer.  Help, please.

  Try this procedure (Note: you must be an administrator to do so):

  1. click on the Start button.

  2. right click "My computer" on the left side, then select 'manage '.

  3. click on "Continue" to popup security message that appears.

  4. in the middle pane of the window that opens, double click on "Services and Applications".

  5. double-click on 'Services '.

  6 scroll to find "print spooler".

  7. right click and select 'Restart' (Note: make sure that you have not opened during this operation the printer print queue window).

  You should now be able to delete the print job (or it may have been deleted automatically).

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• Documents in the print queue will not cancel or print

  I tried all the usual cancel, delete, turn off the PC, turn the printer off, turn them both off the coast of all etc.

  Do or not.  There is no test.

  These directions will not work with Windows XP, but it's the right idea.

  She also leaves a file .cmd lingering somewhere on your system.

  I propose the following technique that works for all versions of Windows and will not let any .cmd persistent or other files on your system:

  First to clear the print queue, you have to stop the print spooler service, and then remove all the jobs/print files pending.
      
  You cannot delete all print jobs in queue so that the Print Spooler Service is running, so you have to stop first.
          
  To stop the Print Spooler Service, click Start, run and enter in the box:
          
  services.msc
          
  Click OK to open the Services Applet.
          
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
      
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
      
  If the "Startup type" is not set to "Automatic", set the "Startup Type" field to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again...
      
  Next. remove all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send them to the printer again once things are cleaned in service yet.
      
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
      
  C:\WINDOWS\system32\spool\PRINTERS
          
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
          
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
      
  After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• The print queue will not empty the first task he accepts to print.

  I have a PC with XP operating system and a HP Officejet 6500 E709a.

  On there are 5 or 6 days, I had a set of updates to Microsoft for various things, which, as usual, has been installed.

  Since the printer has stopped catalogue mid and holding the paper for about 3 minutes before he spits unfinished.

  The job remains in the queue and will not itself should be deleted, so I can not print anything else.

  If I reboot I get sometimes to print a page, but this work is still in the queue until I restart.

  I uninstalled the software and reinstalled the software from the HP using (OJ6500vE709_Full_14.exe) website.

  I still have the same problem

  Help!

  concerning

  Roger

  Any chance to test the printer USB option?

• 5610 cannot clear the print queue, will not print

  Windows 7

  Works very well, then work has been "caught" in the queue. I can't print and I can't delete the job.

  Windows troubleshooting tool said he found a print job in the queue that prevents other print jobs and that fixed the problem, but it has not fixed the problem. If I run againî, I get the same message. Diagnosis seems correct, but just what he thinks he's doing to solve the problem does not work.

  I tried the printer doctor, but even if she sees the printer it does not move to fashion, we're going to fix things.

  Manually, I went to "Cancel all Documets" but that the command was not enabled even if the printer displays the items in its queue.

  I went on the ' record of spooling "in the System 32 directory and it was empty.

  Thanks for your reply. I had who tried once or twice before posting and it has not fixed the problem.

  What I didn't know (and did not appear in the online resources I checked) that the document was in the C:\Windows\System32\spool\PRINTERS directory on ANOTHER computer - hosting the network printer.  Once I found that crime files it I deleted the manually and solved the problem.

• Just, I created a new Windows Live Mail email account and delete another. The new account will not fill up my account of what is on the server. Any advice?

  Can you help me with this?

  Hello 24millers23,

  This thread has been created in the Microsoft answers Site Feedback forum. the Microsoft moderation team has moved this thread on Other/Unknown Networking, Mail and on-line forum.

• In Windows Media Player 11, the Radio Internet in Media Guide part, the Panel more Stations will not fill

  When you use the Media Guide Internet Radio part, the Panel more Stations will not fill.  It displays a continuously mobile circle of green dots, as if she is looking. If I choose the stations in the other panels or shutters, they play like they're supposed to. It started to appear about three weeks ago. I had to R & R my security software (CA internet Security Suite) due to the software being corrupted. What is happening on a computer running XP w/SP3. All the drivers and firmware are up to date. Any suggestions will be appreciated. Thank you.

  See this:

  http://zachd.com/PSS/PSS.html

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• With instant full VM LUN and now the virtual machine will not start or register

  Hello

  I have a case here, where we have a virtual machine that quickly filled the logic unit number and the snapshot is currently 110 GB. It is now available on the new LUN space, but the VM does not start and he was also addressed as 'unknown' in the viclient. I tried to cancel the registration and check-in again, but he refuses to register. It seems that the snapshot is damaged.

  When you try to save it, I get the following in hostd.log:

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': (17) successfully opened size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': open with success (21) size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  Referred to as registry: AXAPTA/AXAPTA.vmx

  Vmsvc indicates file is loaded, by: /vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA.vmx

  I also tried to copy virtual machines directory down to a local PC and run via VMware Converter, but I get the message "the source VMware Consolidated Backup"filename.vmx"has a missing catalog file.

  1. VMware - v

  VMware ESX Server 3.5.0 build-130756

  Any help is appreciated.

  Lars

  The problem (according to the newspaper) is AXAPTA_1-000001 - delta.vmdk no AXAPTA_1-000002 - delta.vmdk (the error on the second snapshot is probably because of the broken parent snapshot).

  The descriptors are ok, which means that the VMDK itself is broken.

  If you do not have a backup, you can try the following:

  -Copy the files in another data store

  -change the second snapshot descriptor to point to the basedisk as the parent

  -Try and mount the drive

  -If you're lucky, you should be able to recover at least some data of

  -If the disklib is complaining again then the two snapshots are broken - which is unlikely

  Depending on how old the second snapshot (the older one is better it is) the method above will not help.

• Safari will not fill my mail.

  Safari will not fill my mail. I have OS X 10.11.3.

  Keep your OS X software update can help questions such as mail. Update your Mac 10.11.4.

  Click on your Apple  top left of your screen.

  In the drop-down menu, click on about this Mac

  Make sure the " view " tab is selected, and then click software update.

  Your Mac may restart several times during the update process. That's ok.

  Then try to access your mail on Safari.

  If it still does not, in your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data from the Web site.

  Then quit and relaunch Safari and try again your mail.

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• BlackBerry Blackberry classic classic said memory of the device, but will not let me delete anything.

  "Preparing Blackberry Hub" does not load.

  If I load swip left to watch, he says prepare Blackberry Hub and 5 icons illuminate one by one, then a few seconds, black screen flashes, then 'Preparation Blackberry Hub' again and again. Never load of my texts and emails.  He eats my battery fast and I watch my % battery drop like crazy, more I leave "preparation Blackberry Hub" running in loops.

  Unable to send texts and incoming texts do not come. When I get to my contacts and try to text someone, he said: "full storage. Storage must be released to perform the operation requested text message".

  My top down swip in the menu drop-down has disappeared except for settings.

  When I try to delete files that I always see in the directoyr to free up space, it is said:

  Cannot delete files such blackberry no file or directory classic

  Help, please!

  I have installed any additional apps!

  I have the 10.3.1.1779 output software

  I have 1200 photos in my camera case! 100 or more of them, I need to register! I've never had a map memory will...

  Connection to the computer don't open files from my Blackberry. I can't find the drive on my computer...

  When I try to open the pictures folder it says error "your application cannot run because your built-in multimedia storage space is full. Delete some files or move them to your media card, & try again. »

  Then the box pop up behind the error box says "not enough space storage."and even your application cannot run etc etc"." I click on File Manager by his suggestion, butt, no files will delete that I pasted at the beginning of the present. And I can't open a picture, when I click on one it says only: "Unable to open" & the name of the file.  But I can scroll down and see my 1000 files, they all flower icon

  Good news!

  Remove all the apps in my Blackberry option did the trick!

  Is it my storage of 15.7 15.6, and after restarting my phone, charged to the top! My texts appear now in the hub and I can text again, and some texts in!

  I can now open my pictures folder and delete a few hundred images that are cluttering up this final cushion memory!

  And tonight I'll move everything on a memory card and erase the memory of the device!

  So people, when file manager tells you to remove the files, but he isn't listening to you when you try to delete the files, simply delete all applications such as Twitter, Facebook, Youtube, Evernote, etc. etc. etc.

  He has completely returned my Blackberry to normal!

  Now, I will take your advice my friend and upgrade to the latest version tonight and never leaves the device still so weak!

  FYI, now the volume up and down button doesn't restart after 10 seconds now or then, but the phone restarts again and again on his own, he doesn't stay offshore. I don't know if it's just me, but report.

• Unable to connect to microsoft account error there was an error and will not take my password.

  Hi, I keep getting a message on my task bar that says I need to update my Microsoft account password. But whenever I have it try says there is an error and will not take my password. I can't connect to my outlook to check the mail of Mr. I already tried to change my password, but even with the new password I get the same results. Help, please! Thank you!

  Hey Kevin,

  If the issue that you are facing is everything by signing to Ebay, I suggest you to contact the Ebay support for assistance.

  Please see the link below to learn more:

  http://pages.eBay.com/help/account/contact-customer-support.html

  If you need help with Windows, get back to us, we will be more than happy to help you.

  Thank you.

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...