the file or folder is not left

Similar Questions

• "[------\\[Computer name] [name of the file or folder] is not accessible." You might not have permission to use this network resource.

  I have a home network with four computers. I have some folders and files we want to share. I haveselected these folders and files in each computer and right click top of opening and then the sharing and Security tab and check share this folder on the network, and then clicking apply and OK. [However, when I try to access these files or folders from another computer on the network I get the name of \\[Computer]------[file or folder name] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permisions. Not enough server storage is available to process this command. Increased the value of the IRPStackSize following another Microsoft kb but stil get the same message.

  How can I fix this problem so that we can share these files and folders between my wife, children and myself.

  OS Win XP Pro SP3 with all its current updates on all computers.

  Any help and asisitance will be greatly appreciated

  Sadnewbie

  Hello

  Perform the steps from the link below and see if it helps.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• Error when changing the name of the folders-"file or folder does not exist.

  Original title: I can't rename my files
  I can't rename my folder in windows vista. "It gives me this error" the file or folder does not exist "and I can't cut/past this files.

  I do not use any unillgel characters such as. and / and...

  Hello

  Run the diagnostic tool for the article mentioned below to resolve this issue:

  "The file or folder does not exist" error in Windows Vista:
  http://support.Microsoft.com/kb/949109

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find the files and shortcuts do not work

  I'll try and make this as short as possible.

  I was moving things in and out of Dropbox on my desk. I decided that I didn't want a certain folder in there, so I brought in My Documents. When I checked later, the record was missing video files. (In fact, lack of everything, but I found other files always in Dropbox). Shortcuts for the videos I find lead anywhere tell me the question was "moved or changed" and when I click Properties, it tells me the path won't and I can't do anything. Oddly enough, I could get a video, but it was. I have not removed anything, so I know that they are not in the bin. I also believe, when I click on "location of the file," at least a few of them refer to a folder, I don't think I even had yet! Yet he says that this is the video. As it is not even hint to the ones I lost. I'm sorry, this must all sounds very mixed, and it is a good way to put the State of me. If someone understands and thinks they can help, I'd really apperciate it!

  Hello

  1. How have you moved the file?

  Please follow the instructions in the link.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  After you back up the registry, you can then go through the article

  "The file or folder does not exist" error in Windows Vista:

  http://support.Microsoft.com/kb/949109

• I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Shared folder error "you do not have permission to access the file or folder you are trying to access to.

  Original title: shared folder

  try to share files and folders between my laptop and my pc... When I try to access partitions shared between them = I got this msg: "you don't have permission to access the file or folder you are trying to access. Contact your network administrator to request access"can u help?

  Hello

  Follow these steps:

  Step 1: Make this file and printer sharing is enabled, computers.

  Follow the steps listed in the link below to check the parameters and the essential elements to share files over the network:
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Also check if network discovery is enabled, the computer. Steps to follow:

  i. click on Start, click on Control Panel.

  II. Select network and sharing Center

  III. Select change advanced sharing settings

  (IV) in respect of network discovery, select Enable network discovery

  Step 2: check the sharing permission on the shared folder.
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Step 3: you can also try to disable your firewall program and security and then try to access to the shared folder. Make sure that you activate it if this step does not help.

  
  Note: Antivirus/Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  In addition, see these articles:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• Unable to delete the file or folder, XP falsely claims it is used

  Quite often when you try to delete a file or folder, I get the response "cannot delete [file or folder name]: it is used by another person or program."  Close all programs that might be using the file and try again. »

  "No one else" uses the file and have already put an end to all operations on the file or folder, nothing is to use it.  Something not publishes the file at the end of any activity with her.

  The only solution is to reboot the computer, which is a huge waste of time. Are there any fixes for this problem?

  Will start looking for unlocker

  You don't have to search, simply click on it.  Unlocker.

• cannot find the file or folder

  the message said: "the file or folder 'muuumar.scr' that this shortcut refers is not found."

  Hello

  A .scr file is a screen saver, something that uses the not dissimilar from .exe files executable code. When you encounter this error message? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to change the highlight color for windows 7 (select the file or folder)?

  How to change the highlight color for windows 7 in the aero theme (select the file or folder)?

  You can change the font size because it is not a widget.   To do this:

  1 type dpi in your Start menu search box, and then choose make text and other more or less important.
  2 - Choose a size you prefer
  3 - Click on apply.

• "The file 'autorun.dll' could not be loaded or is corrupt.

  Original title: autorun.dll could not be found

  I'm trying to install Windows starter on my system (net accountant) currently using Windows 7 Ultimate edition.  It will not even start the process, which gives me the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Moreover, I found the file autorun.dll 'source' folder  However, the installation program is not see it.  It is a download, it's a Windows starter.iso file, I try to install the 32-bit version, I had antivirus in my system M.S Essentials, im trying to install from USB key no help?

  Hi Praveen,

   

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1. you are trying to install Windows 7 Starter on another partition?

  2. which type of installation you are trying to run?

  If you try to install Windows 7 Starter on the same drive where Windows 7 Ultimate is installed, then you must perform a clean installation.

  Follow the link for the reference below:

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Warning : Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.

   

  I hope that the information above helps you.

   

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.

• Could not mount the file. It has not been possible to find a filter for the requested command.

  Get the error message:

  Could not mount the file. It has not been possible to find a filter for the requested command.

  Why is - this happens when I open documents using Mac advertising agency and I'm on PC?

  Hi Mikael,

  files have been archived in archive zip-file when transferred via the ftp protocol? I guess, not.

  If the files were already placed in a document, InDesign on the agency side the following workflow might be the solution:

  Office on Mac OSX:

  1 package the InDesign document, as well as placed images and fonts of the necessary document with InDesign packing device.

  2. the folder packed in a zip zip file.

  3. download the zip file to an ftp server

  You on Windows:

  1. download the zipfile to your own workload.

  2 unzip the zip on your workload. Do not delete the zip file.

  3. rename the folder of the package to fit your scheme of naming of jobs (option)

  4 rename the InDesign document to adapt to your schema naming of jobs (option)

  5. open the InDesign file in the packed file.

  Do not move or save somewhere else.

  Alternative:

  Work with Dropbox to share documents on a shared volume of Dropbox, if documents must move forward and backward between you and the Agency.

  Uwe