The firewall cannot be activated

Similar Questions

• the Windows vista firewall authorization driver is missing, the cause of the problem that the firewall cannot be activated? How to fix?

  Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?

  Hi James,

  Thank you for your e-mail. I solved the problem using System Restore.

• Windows Firewall: get the message that the firewall cannot be activated because a "service is not associated with running.

  In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.

  I'm usually protected by the free AVG service and its protection of identity theft.

  How can I recover the windows firewall?

  How to turn on the windows firewall?

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.

  WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• Guests of security software to activate the Windows Firewall, gets the error while trying to enable the firewall: cannot display the settings because the associated service is not running

  Original title: activate Windows Firewall

  My security software keeps sending me a message that it detects my Windows Firewall is disabled. I want to enable it, but don't know how. My OS is XP Home. How to activate the firewall?

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085>

  UTC/GMT is 19:12 Thursday, October 4, 2012

• HP Officejet 7610: Scan of the computer cannot be activated or scan and combine them into a single pdf document.

  I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.

  I can't find a further recommended HP software for my device other than El captain in operating system online.

  If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!

  The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".

  How can I get that back?

  Thank you

  Hi @JOGL,

  Thank you for joining the HP Forums!

  I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!

  At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Thanks for posting and have a nice day!

• HP5520 Scan of the computer cannot be activated.

  Hello everyone

  I wonder if someone can help me.  I bought a HP5520 all in one printer this week.  I have put in all and I have no problem printing on my WiFi, but it will not scan.

  I use an iMac computer with operating system of 10.9 Mavericks.

  I followed all the advice from other users on the Forum and on the HP website with no luck.

  I get the message computer scan can not be activated.  I've uninstalled and reinstalled the software several times with no success.  Regarding the HP utility there is the option "Enable the analysis to the computer", but it is grey so I can't select.

  Any help woud be appreciated.

  Pete

  Hello pottypeteand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with scanning.  I would like to help.

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Photosmart 5520 e-all-in-one software full function and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 120 envy: envy 120th Scan of the computer cannot be activated MAC running El Capitan

  Hi guys,.

  I recently installed it all above named mentioned HP printer software but for some reason, I can't Scan for compatible computer.

  I need to work in order to scan a batch of documents and consolidate in 1 file.

  The native application of the Mac scanner handles scan page by page and saves it on my desk. but I really need the batch option to work.

  I followed all the standard procedures to reinstall the software, resets etc, but I'm still having the problem.

  Under the HP utility screen, I have the scan to computer option on the bottom of the menu. I click on that and extract information. Then I get this message as well as the red dot

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I made sure all the software is installed and I still have the same question.

  I can connect to the printer and scan of the web also. I just seems to be a problem with the HP utility App and the printer.

  Any advice would be appreciated.

  Thank you very much.

  Paul.

  Hi Paul,.

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Then, open the HP utility and try to activate the Scan of the computer again.

  Please let me know the results,

  Shlomi

• OfficeJet 5740: officejet 5740 - scan of the computer cannot be activated - cause communication error

  2 weeks ago, I bought a HP officejet 5740 - installed the software and everything worked well. Unfortunately, the printer is dead, and I just got a new.  In order to start to 'clean up', I removed all HP on the Mac software - and then installed the printer. I can print - and scan using progtram analysis. The printer is connect via ethernet.

  This left me with 2 numbers

  (1) for installation, Setup fails when I reached the setting of alerts (communication error - please restart the program) try to configure alerts in HP utility fail - even once to the criticism fail - restart program

  (2) I'm not able to activate the scan of the computer on the Mac.  I get "communication failed" when I try to turn on the feature in HP utillity

  What I tried

  Delete all HP software (several times) and reinstall it again - still the same problem

  I removed the HP software and used the diskutillity to fix the rights - and reinstalled him brand new - still same problem.

  I have reset the printingsystem on the mac - still the same problem

  I still think it's weird - because everything worked great with the first printer I had! -replace it with a similar one caused the problem.  And this isn't the printer - because scan to computer works with my wife PC

  I have run out of ideas - and hopes that someone can solve this problem!

  Carsten

  Thank you for your reply - the problem is now resolved.  It seems that when you run Uninstall HP also something with the printerdrives provided by Apple update. I noticed that version 3.1 was installed on March 2, when I installed the first printer, I bought (the one who broke down) in all my tests, uninstalling and installing the drivers, I have checked apple update, it says no new updates, but last night he said suddenly that there was an update and then it reienstalled the 3.1 drivers HP again - and surpirice the problem has been solved.

  Thank you for your quick response!

  Carsten

• I'm playing a game on MSN and it says I have a problem with the firewall. I activated the firewall from Microsoft, don't you think not that I have another firewall somewhere?

  Error 1863 and 6891 to 6900.  These codes have to do with Windows Live Messenger?

  Hi Tina,

  In dealing with the problem with the Windows Live Messenger games, I recommend you post your question in Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• 80070422 ERROR_SERVICE_DISABLED. The service cannot be started, either because it is disabled or because__it has no active device is associated to him.

  Just bought a HP Pro Book 6440 with Windows 7 installed.

  Problem with windows Defender.  Cannot be enabled after a pop up.

  Code: The service cannot be started, either because it is disabled
  There is no active device is associated to him.

  Windows security systems cannot be turned on.

  Also get Automated request

  Message on google: your query looks like automated queries of a spyware application.
   
  blocked warning Spyware navigation

  We recommend that you scan your computer against viruses and spyware immediately and remove any suspicious software found.

  I use Kapersky 2011.  No problem scanning every day.  Programs spyware downdload no change.

  Now after a week impossible to surf the internet or google whatever it is or view facebook pages.

  Tried many things.  Help, please.

  Hello

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:

  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center:

  http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  (a) click Start, type Notepad in the start search box, and then click Notepad in the list programs.

  (b) copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  (c) click file, click Save as, and then type Repair.bat.

  (d) in the file type box, click all files (*. *).

  (e) in the area save in, click Desktop, and then click Save.

  (f) on the file menu, click on exit.

  (g) the right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (h) try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove, then click Yes.

  Try to start Windows Defender after these steps.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPad cannot be activated because the activation server is temporarily unavailable

  I've updated my ipad with recent IOS.  Now my ipad cannot be activated because the activation server is temporarily unavailable.  Any suggestions?

  have you contacted apple support team, question do you have to solve the problem seen yet, remember the question, waiting for the support team! hope it's a simple solution to solve

• I have an iMac of 2012 with a 27 "screen cannot enable the firewall?

  There are two users on my iMac, my husband and i. checked to see if the firewall was on. It was not the case. Tried to turn it back on

  the machine wouldn't let me. In permissions, there is a user ID remote listed 95 while I of course 0. I'd be

  concerned? Someone is using my computer remotely? When he sleeps, I hear the hard disk rotation actively sometimes.

  What should I do about it?

  Hello. Please follow the instructions below to turn on your firewall.

  Configuration of the firewall application under OS X 10.6 and higher

  Follow these steps to turn on the firewall for the application:

  1. Choose System Preferences from the Apple menu.
  2. Click on security or security & privacy.
  3. Click the Firewall tab.
  4. Unlock the pane by clicking on the lock in the lower corner on the left and enter the administrator username and password.
  5. Click "Turn on the firewall" or "Start" to turn on the firewall.
  6. Click Advanced to customize the configuration of the firewall.

  OS X: about the firewall application - Apple Support

  Best regards

  Austin