Similar Questions

• Solitare opens suddenly, with cards staked in a stack to the top left corner. I was not able to detach them to play a game. Help!

  Solitare opens suddenly, with cards staked in a stack to the top left corner.  I was not able to detach them to play a game.  Help!

  Hi Perren7,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  3. the sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If that is not enough then try to create a new user account and check what is happening. To create a new user account

  1. to open user accounts, click the Start button, select Control Panel, click user accounts and parental control, and then click user accounts.

  2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last

  I tried to open an old lightroom on an external hardrive to access photos and he replaced my current lightroom with this former... How do you find my lightroom course content? Note the lightroom currently on my computer was not saved in the last two weeks.

  Please re - locate all of the missing images.

  Reference: How to find the lack of photos in Photoshop Lightroom

  Kind regards

  ~ Mohit

• Apex Oracle 10 g the requested URL /apex/wwv_flow.show was not found on this

  I searched the forum without being able to find a solution that works for me.
  I'm trying to create a table with the following sql.

  CREATE TABLE MEMBERS
  (
    MEM_NUMBER           VARCHAR2(12 BYTE) CONSTRAINT MEM_NUMBER_NN NOT NULL,
    MEM_SNAME            VARCHAR2(25 BYTE),
    MEM_FNAME            VARCHAR2(25 BYTE),
    MEM_ANAME            VARCHAR2(25 BYTE),
    MEM_TITLE            VARCHAR2(25 BYTE),
    MEM_IDTYPE           NUMBER(5),
    MEM_IDREF            VARCHAR2(120 BYTE),
    MEM_DATE_IDISS       DATE,
    MEM_ADD1             VARCHAR2(60 BYTE),
    MEM_ADD2             VARCHAR2(60 BYTE),
    MEM_ADD3             VARCHAR2(60 BYTE),
    MEM_ADD4             VARCHAR2(60 BYTE),
    MEM_PCODE            VARCHAR2(12 BYTE),
    MEM_PHONE            VARCHAR2(20 BYTE),
    MEM_DREG             DATE,
    MEM_TREG             DATE,
    MEM_DLAST            DATE,
    MEM_DBIRTH           DATE,
    MEM_DOBON            NUMBER(1) CONSTRAINT MEM_DOBON_NN NOT NULL,
    MEM_POST             NUMBER(1) CONSTRAINT MEM_POST_NN NOT NULL,
    MEM_NEW              NUMBER(1) CONSTRAINT MEM_NEW_NN NOT NULL,
    MEM_BARRED           NUMBER(1) CONSTRAINT MEM_BARRED_NN NOT NULL,
    MEM_SEX              NUMBER(5),
    MEM_BDAY             NUMBER(5),
    MEM_BMONTH           NUMBER(5),
    MEM_BYEAR            NUMBER(5),
    MEM_ANAL01           NUMBER(5),
    MEM_ANAL02           NUMBER(5),
    MEM_ANAL03           NUMBER(5),
    MEM_ANAL04           NUMBER(5),
    MEM_ANAL05           NUMBER(5),
    MEM_ANAL06           NUMBER(5),
    MEM_ANAL07           NUMBER(5),
    MEM_ANAL08           NUMBER(5),
    MEM_ANAL09           NUMBER(5),
    MEM_ANAL10           NUMBER(5),
    MEM_CARDNO           VARCHAR2(22 BYTE),
    MEM_FACE             NUMBER(10),
    MEM_ID               NUMBER(10),
    MEM_ENTRY            NUMBER(1) CONSTRAINT MEM_ENTRY_NN NOT NULL,
    MEM_CARD1            VARCHAR2(22 BYTE),
    MEM_TYPE1            VARCHAR2(4 BYTE),
    MEM_COLOUR           NUMBER(10),
    MEM_NAMEDAY          NUMBER(5),
    MEM_NAMEMONTH        NUMBER(5),
    MEM_ANIVDAY          NUMBER(5),
    MEM_ANIVMONTH        NUMBER(5),
    MEM_ANIVYEAR         NUMBER(5),
    MEM_NAMESPECIAL      VARCHAR2(4 BYTE),
    MEM_ITGNO            VARCHAR2(12 BYTE),
    MEM_GDREG            DATE,
    MEM_ENTERED_BY       VARCHAR2(16 BYTE),
    MEM_LAST_UPDATE_BY   VARCHAR2(16 BYTE),
    MEM_SIG              NUMBER(10),
    MEM_NO_GRAD          NUMBER(1) CONSTRAINT MEM_NO_GRAD_NN NOT NULL,
    MEM_FREE_PARK        NUMBER(1)                DEFAULT 0 CONSTRAINT MEM_FREE_PARK_NN NOT NULL,
    MEM_STATUS           VARCHAR2(9 BYTE)         DEFAULT 1                     NOT NULL,
    MEM_AUTH_STFF_CRDNO  VARCHAR2(12 BYTE),
    MEM_BARCODE          VARCHAR2(37 BYTE),
    MEM_BADGE_NUMBER     NUMBER(16),
    MEM_GRPADDR_NAME     VARCHAR2(50 BYTE),
    MEM_DISP_NAME        VARCHAR2(25 BYTE),
    MEM_DIST_FRM_CASINO  NUMBER(24,4),
    MEM_GEO_CODE         NUMBER(5)
  )

  and the answer I get from the Apex is: -.
  The requested URL /apex/wwv_flow.show was not found on this server
  
  Please tell me what I'm missing.

  Try to run in sqlplus.

  There is a difference between your 2 attempts to validate the statement. The second includes a schema qualifier:

  CREATE TABLE SGM.MEMBERS...
  

  You run that he logged in as user SGM?

• error "Ibsta" no was not declared in this scope

  I have a "error: 'Ibsta' was not declared in this scope."

  I try to program with C++ and GPIB test equipments, but so far, I have this problem.

  I'm sorry, but my knowledge of C++ is very limited because I took a module on it for about 4 months in College and now I have to rectify emergency for my project. Any help would be much apprciated, I tried searching the forums, but I still have to find an answer. I think it has something to do with my linker. BTW, I use Code blocks to compile program, so it may be different from other IDEs posted here such as Microsoft Visual C++, Borland, Dev C++.

  The program that I write to you is as follows:

  #include
  #include "ni488.h".
  #include
  #include
  #include "Decl. - 32.h"
  #include

  using namespace std;

  void GpibError (const char * msg); / * Function to Error statement * /.

  Device int = 0; / * Peripheral device descriptor * /.
  int BoardIndex = 0; / * Interface index (GPIB0 = 0, GPIB1 = 1, etc..) * /.

  int main() {}
  int PrimaryAddress = 28; / * Main unit address * /.
  int SecondaryAddress = 0; / * Secondary unit address * /.
  char Buffer [101]; / * Read buffer * /.

  /*****************************************************************************
  * Boot - made only once at the beginning of your application.
  *****************************************************************************/

  Device = ibdev (/ * create a device descriptor pointer * /)
  BoardIndex, / * Board Index (GPIB0 = 0, GPIB1 = 1,...) * /.
  PrimaryAddress, / * address of the primary device * /.
  SecondaryAddress, / * peripheral secondary address * /.
  T10s, / * delay (T10s = 10 seconds) option * /.
  1, / * line EOI assert at the end of writing * /.
  (0); / * Mode of termination EOS * /.
  If (Ibsta() & ERR) {/ * find GPIB error * /}
  GpibError ("ibdev Error");
  }

  ibclr (Device); / * System * /.
  If {(Ibsta() & ERR)
  GpibError ("ibclr Error");
  }

  /*****************************************************************************
  * Body - writing the majority of your GPIB application code here.
  *****************************************************************************/

  ibwrt (device, "* IDN?", 5 "); / * Send the command ID of the query * /.
  If {(Ibsta() & ERR)
  GpibError ("ibwrt Error");
  }

  Bird (device, buffer, 100); / * Read up to 100 bytes of the device * /.
  If {(Ibsta() & ERR)
  GpibError ("Bird error");
  }

  Buffer [Ibcnt ()] = '\0 '; / * Null terminate the string ASCII * /.

  printf ("%s\n", buffer); / * Print the device identification * /.

  /*****************************************************************************
  * UN-initialize - done only once at the end of your application.
  *****************************************************************************/

  ibonl (device, 0); / * Turn off the line * /.
  If {(Ibsta() & ERR)
  GpibError ("ibonl Error");
  }

  }

  /*****************************************************************************
  * Function GPIBERROR
  * This function will warn you that a function of NOR-488 failed by
  * a print error message. The State IBSTA variable will also be
  * printed in hexadecimal with the senses mnemonic of the forest
  * position. The State IBERR variable will be printed in decimal form
  * with the mnemonic significance of the decimal value. The status
  * Variable IBCNT will be printed in decimal form.
  *
  * The NOR-488 IBONL function is called to turn off the equipment and
  * software.
  *
  OUTPUT Comptrollership will end this program.
  *****************************************************************************/
  void GpibError (const char * msg) {}

  printf ("%s\n", msg);

  printf ("Ibsta () = 0 x %x<",>
  If (Ibsta() & ERR) printf ("ERR");
  If (Ibsta() & TIMO) printf ("TIMO");
  If (Ibsta() & END) printf ("END");
  If (Ibsta() & SRQI) printf ("SRQI");
  If (Ibsta() & RQS) printf ("QR");
  If (Ibsta() & CMPL) printf ("CMPL");
  If (Ibsta() & LOK) printf ("LOK");
  If (Ibsta() & REM) printf ("REM");
  If (Ibsta() & CIC) printf ("CIC");
  If (Ibsta() & ATN) printf ("ATN");
  If (Ibsta() & TAC) printf ("TAC");
  If (Ibsta() & MFP) printf ("LAKES");
  If (Ibsta() & CDI) printf ("CDI");
  If (Ibsta() & DCAS) printf ("DCAS");
  printf ("" > \n ");

  printf ("Iberr() = %d", Iberr() ");
  If (Iberr() == EDVR) printf ("EDVR \n");
  If (Iberr() == ECIC) printf ("in ECIC \n");
  If (Iberr() == ENOL) printf ("ENOL \n");
  If (Iberr() == EADR) printf ("EADR

  \n");
  
  If (Iberr() == HELLO) printf ("the GRAE \n");
  If (Iberr() == ESAC) printf ("ALD \n");
  If (Iberr() == EABO) printf ("EABO \n");
  If (Iberr() == ENEB) printf ("ENEB \n");
  If (Iberr() == PAES) printf ("PAES \n");
  If (Iberr() == ECAP) printf ("ECAP \n");
  If (Iberr() == EFSO) printf ("EFSO \n");
  If (Iberr() == USBE) printf ("USBE \n");
  If (Iberr() == ESTB) printf ("ESTB \n");
  If (Iberr() == ESRQ) printf ("ESRQ \n");
  If (Iberr() == XTAB) printf ("Established\n");
  If (Iberr() == ELCK) printf ("ELCK \n");
  If (Iberr() == MART) printf ("MART \n");
  If (Iberr() == EHDL) printf ("EHDL \n");
  If (Iberr() == EWIP) printf ("EWIP \n");
  If (Iberr() == ERST) printf ("ERST \n");
  If (Iberr() == EPWR) printf ("EPWR \n");

  printf ("Ibcnt () = %u\n", Ibcnt() ");
  printf ("\n");

  / * Call the ibonl to get the device and interface offline * /.
  ibonl (device, 0);

  "exit" (1);
  }

  The program I had is a sample I found the Instrument National software called GPIB Explorer.

  
  

• error: 'QmlDocument' was not declared in this scope

  I followed along the following:

  https://developer.BlackBerry.com/Cascades/documentation/UI/integrating_cpp_qml/index.html

  And added the following code to main.cpp:

  #include 
  #include 
  
  #include "app.hpp"
  
  using ::bb::cascades::Application;
  
  int main(int argc, char **argv)
  {
      Application app(argc, argv);
  
      QmlDocument *qml = QmlDocument::create("main.qml");
      AbstractPane *root = qml->createRootNode();
      Application::setScene(root);
  
      return Application::exec();
  }
  

  When compiling, I get the error:

  error: 'QmlDocument' was not declared in this scope
  

  Your weird namespace.

  using bb::cascades;

  Try this.

  Edit: Also if I were you I wouldn't want to create a new project and select HelloCasades as a model.  That will be running a lot faster than to try to do it from scratch.

• another namespace issue? 'CameraSettings' was not declared in this scope

  I have a camera native c ++ application coded and run successfully.

  I want to change the flash mode.  So I add:

  CameraSettings* cameraSettings = new CameraSettings();
   cameraSettings->setFlashMode(CameraFlashMode::Light);
   camera->applySettings(cameraSettings);
  

  I also add:

  #include 
  #include 
  

  When I build, I get the error:

  'CameraSettings' was not declared in this scope.

  Is it a matter of namespace or a:

  LIBS += ?
  

  ... question?

  Something else?

  My current LIBS:

  LIBS += -lcamapi -lscreen
  

  I see what is happening, I mix with QT c functions.

  I need to use the settings as shown in this example:

  http://supportforums.BlackBerry.com/T5/native-development/Flash-always-on-camera/m-p/1911403/HIGHLIG...

  Thanks for your help.

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

  original title: Devicewhat is the error code 21

  I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

  Hello

  We really need more information - ask in the games and/or Windows Forums for your
  version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  You can also check your version of Windows, then good topic Windows: games.

  It is a question where you may need to actually test in several forums.

  Don't forget to check the known issues with the support from the game and forums, but also any device
  in question.

  -------------------------------------------

  Reboot to see if the problem comes back.

  Here are the general meaning.

  21

  Windows removes this device. (Code 21)

  Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The RV042 502 Bad Gateway CGI was not CGI/1.1 compatible

  Hello

  I have half a dozen routers RV042 in various places.  They are running v4.0.0.07.  Apparently at random, I had the

  502 bad Gateway

  The CGI/1.1 CGI was not consistent.

  error when you try to connect to the web interface with google chrome (even with IE too).  This is happening on the side LAN.  I actually didn't notice until my software Opsview monitoring threw up a critical when he did get an http response.

  The router otherwise actually works very well.

  Since the first occurrence, several of my routers have developed the same error.

  I have tried different browsers, clear caches, although I'm not surprised that these efforts were in vain, because clearly there is a problem even when no browser is involved (nagios).  Nagios http checking also returns a 502 Bad Gateway.

  I guess that a reboot is in order, but I'm looking for other explanations/solutions before having to restart because I would like to avoid that if possible.  If I can help more, please let me know.

  Thanks for the help.

  I know you are trying to avoid a reboot, but I would try and see if the problem goes away.  The rv series starts acting funky when they have not been restarted for awhile.

• The/pls/apex/f requested URL was not found on this server. -out of blue

  Hello
  I started getting error '/ pls/apex/f URL was not found on this server.' requested while trying to 'run' on the page. I can edit it and, if iexport/import it it works fine, until after I start making changes to all switch elements of "item displayed as text basedo n lov, does not save state' to 'Save State '. It doesn't seem to be a specific item...
  Where can I see the log which is agitated hapenning during execution of this page?
  Thank you
  Andrew

  Andrew,

  RE: 1 - because now I just want to be able to see step by step what happens when rendering or submit occurred.

  Running in debug mode will show you that.

  RE: 2 - you said: "then the method I described (that you used) is the simplest way." I'm not sure I understand - what methodology?

  You said in the second post on this topic, "the approach I used to nail the region is the link: here", and you have access to a post where I described how I would do, still shows here:

  I would disable systematically on the side 'show' of the page. Start by regions. Put a condition never on each. Run the page. If the error Stops, you know that the problem was in one of the regions. If this is not the case, turn off the process and calculations, etc.. Then enable these components one by one until the problem recurs. When you conclude that the problem area (if it's a region), then disable the elements and buttons in the region and so on. The problem may be due to an unhandled exception somewhere inside one of the components.

  RE: 3 - all types. It is not clear (to me at least) if the binding occurs correctly, what values are passed to the pl/sql. I have referred to the session variable correctly or I made a typeoff, etc., etc.

  Again, more details on the situation would be useful. At page debug output is not sufficient, and equip your own code is not enough, you can always find your database session and see what happened. Add & ptrace = YES to the URL, run the page or send the page check the destination database for the trace file and tkprof dump to get a report.

  Scott

• How fix the pavilion zd8000 sd card reader was not working from day one?

  Windows XP o/s, updated the driver for hp downlouds still does not help!

  zd8369ea

  What type of sd card do you use? You use an adapter with it?

• Just bought PS CC... Thought I have would have been directed to the download site... Was not...

  Just bought PS CC... thought I have would have been directed to the download site... Has not been

  You can download the upgraded version of CS6 feature of Photoshop right now.  CC of Photoshop is released at night PDT.

• 'DAQmxReserveNetworkDevice' was not declared in this scope

  Hey guys. I have a problem with this function. I have already included NIDAQmx.h in my aplication c ++ and the functions of this header works. However, I was checking and "DAQmxReserveNetworkDevice" was not included in the header, identical to DAQmxAddNetworkDevice. How to use these functions in my application c ++ then?

  I got it. I just added the function in the NIDAQmx.h, so now I'm able to use the service. I write in attachments of the header file where everyone needs