Similar Questions

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• Not found operating system - Windows 7 after Windows Update

  Hi all

  My Dell Studio 1737 was upgraded from Windows Vista to Windows 7 Ultimate in November last year. I have no problems apart from a few minor problems with the DVD player. Last night, ran Windows update and 4 updates before you shut down correctly installed. This morning, I rebooted and the message - operating system not found. I can't access the hard drives or DVD to try a reinstall. By pressing the F8 function key just the fact of restart. Any ideas on how to recover the system would be greatly received.

  Thank you
  Kevin

  KevinHB,
  Are you able to start on the CMOS screen (Dell)?  I think you press F2 during the Dell splash screen.  If you are able to boot to CMOS it recognize your HD?  You have a Windows 7 DVD?  If so check that the DVD player is set as the first boot device, and then try to boot from it.
  If you are not able to access CMOS or the DVD is set as the first boot device and won't start him, then you need to contact Dell, because it can be a hardware\BIOS problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acer aspire can't load the Windows operating system

  Acer Aspire V5 PG 471 refers to starting a black screen with the message "operating system ' not found after upgrade from 8.1 to 10 Windows failure. The road to recovery key F2 does not work (the button not responding).

  Is there a solution to this?

  Follow the instructions on the link I posted.

• What is the best operating system

  Hello

  What is the best operating system, Windows 7 or Windows 8?

  Night1

  I have to say I'm a fan of Windows 8, not looked back since the upgrade of my laptop at home a few months back. The initial setting is quick and painless, the interface is really clean and simple to use, and there are also many other benefits.

  I found this article online, which talks about reasons why you should go:

  Why you should switch to Windows 8

  I would certainly invest!

  Damian.

• How can I change the file permissions that are made in the other operating system on the same machine?

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.
  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.
  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.
  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.
  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system
  in the other disk drive D (that I already formatted)
  How can I get out of this problem?
  Thanks in advance.
  Balu.

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.

  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.

  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.

  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.

  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system

  in the other disk drive D (that I already formatted)

  How can I get out of this problem?

  Thanks in advance.

  Balu.

  If encryption is not involved (if you do not encrypt the files originally) and is just a file permissions problem - simply take possession of the files first and then change the permissions when your account has full permissions on the files/folders that you need.

  If you do not backup your encryption certificate and key encryption is involved, then the data are almost lost to you.

• How can I remove the old operating system

  * Original title: facilities of Windows 8 2 Found

  I recently went to window 8 and after trying to upgrade to 8.1 windows, my computer would not start and kept a loop in auto repair. So I decided to reinstall windows 8 on my partition. Well after installing Windows 8 again, whenever I start my computer it asks what windows installation to use as he sees 2 of them. The old and the new. How can I delete the old one? Thank you!

  Hello

  You can remove the old operating system of the system configuration utility.

  Here are the steps to remove the operating system:

  1. press Windows key + R, type msconfig and press ENTER.

  2. click on the Startup tab.

  3. on the Startup tab, you will find the list of operating systems. Click the operating system that you want to remove and click the Remove button.

  4. click on apply and Ok.

  Please post back the results and we will be happy to help you.

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• VMPlayer newbie - switch back and forth between the host and the guest operating system

  I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

  Hello, welcome to the forum

  Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

  According to this link , it's the same thing in Linux host too.

  >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

  > pref.hotkey.shift = "true".

  > pref.hotkey.control = "true".

  > pref.hotkey.alt = "true".

  After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

  I hope it helps a bit.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

• How do I redo effect after restarting the guest operating system?

  Hi all

  I use VMWare Server 2 and VMWare Player 2.x. We had to redo it to hard drive. But it is only valid after the power off and power on the guest operating system.

  We want to be effective after the guest OS restarts from himself.

  Our guest operating system is Windows XP Pro 32 bit, server host is OpenSUSE 11.1, player host is Windows 7.

  Thanks in advance.

  Kind regards

  Cavendish

  Hello

  According to Manual of VMware server, you can only discard all changes the disk not persistent after power out voltage or reset.

  You can use the reset vmrun command if you want to turn off your virtual machine. You must use the reset option (it has the same function as Reset button on the real machine).

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Upgrade memory of the guest operating system

  Hello

  There is problem, increasing memory on the guest operating system.

  Here is the hardware config

  HP Blade

  Whe have 14 GB of physical RAM on this server blade

  ESXI 3.5 VM

  Windows 2003 guest entry (guest 2 OS) operating system

  Question:-we want to divide our 14 GB of ram in two comments OS 7 GB each.

  When connect us to OS there is no increase ram it shows only invited invited old config ram, how can I update to the new allocation of RAM on the operating system.

  Thanks in advance.

  No worries, consider the positions of marking as useful or appropriate if it's for you.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• VMWARE Newbie - installation problems with the guest operating system

  I heard a lot about the use of VMWARE for a long time so I downloaded and then installed ESXI 3.5 on a test area.  I installed the client and have been able to create a new virtual machine.  However, I run into some difficulty with installing a guest operating system.  All the pdf that I could find have suggested that simply by putting a CD in the server's drive and then turn on the virtual machine would start the my guest operating system installation process.  Unfortunately, my VM doesn't seem to see my CDRom and tent drive a start-up network, followed by a brief wait for the message 'Operating system not found' timeout.

  Can someone please help me find a way to create a new guest OS on my VM so that I can.

  1. understand the process

  2 start testing.

  Thank you in advance.

  If you have installed of course the VI Client to create the VM, and you insert the CD into the ESXi host? You can go to change settings on the virtual machine, click the CD/DVD and select the option use the host device. Also ensure the connection to turn on is checked.  When you turn on the virtual machine, it should see the CD that you inserted in your ESXi host. Once you get the operating system to load, you can configure to allow remote desktop connections and access the VM as a traditional physical machine, rather than relying on the console of the VI Client view.

• Blue screen on the guest operating system with code BUGCODE_USB_DRIVER when I connect an iPod

  Hello

  I use VMware server 2.0 (build 122589) on Windows VISTA 32 bit. The guest operating system is Windows XP SP3.

  When I connect an iPod Touch on the guest computer, after a few seconds, there is any time a blue screen Windows with code BUGCODE_USB_DRIVER. I have connected 2 different digital cameras and the crash does not add.

  Technical information:

  STOP: 0X000000FE (0X00000005, 0X8228F0E0, 0 X 80867112, 0X822FFF70)

  Does someone have an idea?

  Thank you

  Stop the prompt then proceed as directed by the attached screenshot with the VM highlighted in the left pane.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• I want to install windows os(not genuine) in the mac, I use mac air beginning 15, 4 GB of ram, 128ssd.     I want to play counter strike (overall offensive) in the windows operating system.     is 4 GB of ram enough or it takes 8 GB of ram.

  in fact, I want to install windows os (not authentic) because I'm fond of counter strike

  so, mac support this game?

  or it takes 8 GB ram to play counter strike?

  operating system windows (not authentic) will cause no effect on mac?

  If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?

  ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.

  operating system Windows (not authentic)

  This means that you ask for assistance on the use of a pirate copy of Windows?

  If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.

  Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/

• My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  Safari cannot be updated past 6.2.8 on Mountain Lion. If you want to, switch browsers.

  (144681)