The higher of the two separate calculations

Similar Questions

• How to turn on the two separate LEDS by using one or two outputs digital

  We use NI 9172 cDAQ with an entry and an exit module hung. I have my program in place with 2 input lines and a line out, but I think I need two lines of output, in any case using my Boolean switches and doors logical digital that I wired up to three switches Boolean just play with the possible entries to turn on LEDs. The way I set it up that a single LED is lighting up but it is to recognize that there are 2 LEDS, so I don't know what I need to add or change, I'll attach a copy of my program for you to watch...

  Thanks for the help I found the table of construction and both got to light up... like I said im completely new to this

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• How to get firefox 4 to allow two separate processes run at the same time.

  I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
  p - profilename - noremote

  And it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
  I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
  Any help would be appreciated.

  The correct format for this command is -no-remote

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• How can I implement two TCP/IP servers (on two separate computers) and a TCP/IP client (on the third machine)

  I have an application where I need to send data via TCP/IP from two separate machines to a third machine. The machines are on a local network connected via a network switch. The data are produced independently through data acquisition by two independent machines before are sent to the client on the third machine. Each machine has a network card. Thank you.

  Each server listening on a port separated.  On the client have two loops, each loop tries to open a connection using the IP address of one of the servers on the respective port.  I have this work currently, including the ability to reconnect automatically if a connection is lost.  I could put together a disassembled low example for you if you need.

  It is based on the framework of the STM, you find on the site of NOR and download it.  It includes excellent examples.

• axCWIMAQVision.ExtractSingleColorPlane, performed twice on two separate images, throw an error on the second try

  I have the following code in c#:

  ' Private Sub ExtractColor (SourceImage, CWIMAQImage CWIMAQImage DestinationImage)
  {
  CWIMAQImage colorPlane = new CWIMAQImage();
  axCWIMAQVision1.ExtractSingleColorPlane (SourceImage, colorPlane, CWIMAQColorPlanes.cwimaqLuminancePlane);
  axCWIMAQVision1.Copy (colorPlane, /DestinationImage);

  }

  I need to run this method twice on two separate, identical images every time that overwrite the original image. It works on the first fine image, but then on the second picture, she throws an exception ("Type of Image invalid"). What happens here? I tried to change the order of how to get picture but the first we're STILL working and the second fails.

  I just looked at your code once again, and now I'm sure of it.  Image1 and Image2 are pointing to the same image as the Original.  Since using them as images of destination, they are getting crushed.  Your code is like the following:

  ExtractColor (Original, Original) / / Original has been transformed from color to grayscale

  ExtractColor (Original, Original) / / cannot convert to grayscale image, must be color - error!

  Bruce

• What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives?

  What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives? -Dell Vostro 1710, my wife had to be returned to Dell, I installed its Vostro hard drive in my Dell Vostro 1710 SAME, but I don't get a menu starting double when I turn on my Vostro. (Both Vista Business operating systems are licensed separately).

  I would like to start his drive hard so that it looks like 'his' office on 'his' computer.

  Thanks for any advice.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/how-do-i-set-up-a-dual-boot-vista-and-xp-with-2/d1e95c26-0e48-4a8d-9e0f-526da19dce52?tm=1336794280998

  The easiest way is to use the DualBoot Pro.  He has the tools to write the necessary code automatically.  It is excellent for managing the tasks you want to do.

  However, you have a potential license problem.  Even if your Dell has the exact code in the BIOS to activate the copy of Windows on the hard drive of your wife, the computer is only allowed for an OEM copy.  If Dell is back after repairs then you should be OK once you have turned on the hard disk in his computer of your wife. You can delete the entry of additional start with DualBoot Pro menu,

• If I buy a Windows 7 installation disc, can I install it on two separate computers if I have two (the original) product keys?

  Getting two new drives hard but do not want to lose the computers.

  If I buy a Windows 7 installation disc, can I install on new hard drives of two separate computers if I have two (the original) product keys?

  Getting two new drives hard but do not want to lose the computers.

  If I buy a Windows 7 installation disc, can I install on new hard drives of two separate computers if I have two (the original) product keys?

  If the product keys are the same edition, Yes, you can use the same installation media to install on two computers.

• The student CC account be used on two separate devices, or this is just a license of the machine?

  I am a student and want to use my account on two separate devices, but I don't know if it's possible?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Receive error message when calculating the two fields with different date format

  I'm more familiar with SQL Server and Oracle, then after a search online without success, I ask here.

  I use developer PL/SQL with DB Oracle 11g Release 11.2.0.2.0 Enterprise 64-bit

  MyTable:

  ID_Number VarChar2

  Date of Date_Received

  Select ID_Number,

  Date_Received,

  To_Date (substr (ID_Number, 1.6), "YYMMDD") SentDate,.

  Date_Received - NumDays To_Date (substr (ID_Number, 1.6), "YYMMDD")

  FROM MyTable

  Where substr (ID_Number, 7.3) in ('ABC', 'ABD')

  and length (Trim (translate ((substr (ID_Number, 1,6)), '0123456789',' '))) a null value

  ID_Number Date_Received SentDate NumDays

  131002ABC1654106 10/16/10/2013-2013 14 2

  131004ABD8813899 4/12/2013-4/8/2013 4

  131014ABD1844832 10/16/10/14 OF 2013-2013 2

  Sometimes the first 6 characters in the ID_Number aren't the numbers and length (Trim (translate deletes records))

  I want just the records where NumDays > 2

  I tried to put the request in a subquery and using where NumDays > 2 outside.  I also tried using the calculation directly in the Where clause.  Without it in Where clause it works very well, with him in a place, I get the following error:

  ORA-01931: Date format picture ends before converting all of the input string

  
  

  I don't know how to put the two dates in the same format.  I tried to declare the format without result.  I don't understand how I can calculate in the selection, but do not use the same calculation in Where clause.

  Thank you for your help.

  Hello

  SQL is a language to describe the desired results.  How the system gets these results belongs to you don't have much say about which conditions will be applied when.

  One place where you can control the order of things is a CASE expression.  When you say

  CASE

  WHEN condition_1

  THEN expression_1

  END

  You can be sure that expression_1 will be evaluated only when cond_1 is set to TRUE.

  Try something like this:

  WITH got_sent_date AS

  (

  SELECT id_number, date_received

  CASE

  WHEN the TRANSLATION (SUBSTR (id_number, 1, 6)

  , 'x' 0123456789 '.

  , 'x'

  ) IS NULL

  THEN TO_DATE (SUBSTR (id_number, 1-6)

  , "YYMMDD".

  )

  END AS sent_date

  FROM MyTable

  WHERE (id_number, 7, 3) SUBSTR ("ABC", "ABD")

  )

  SELECT id_number

  date_received

  sent_date

  , date_received - sent_date AS num_days

  OF got_sent_date

  WHERE date_received > sent_date + 2

  ;

  If you would care to post some sample data (CREATE TABLE and INSERT statements) and the results desired from this data, I was able to test this.

  Of course, you'll still errors of execution if id_number starts with 6 digits, but they do not have to be valid, for example '131100' or '130229'.  This is one of the reasons why the date information storage in VARCHAR2 columns are a bad idea.  To work around this problem, see

  https://forums.Oracle.com/message/4255051

• Shrink and move the two adjustment high tide

  Hello

  I'm trying to discern the difference between her shrink and move and their impact on the high tide of a table.

  My understanding is that MOVE rewritten because each row in a table (so why he can cope with the rank of chaining) while SHRINK moves essentially existing rows in a table 'down' the table in any available freespace. That's why the MOVEMENT takes a tablelock while SHRINK takes a line lock.

  I want to see is MOVE and REDUCE the effect of high tide and all the two free space and give it back to freespace for the tablespace?

  I think MOVE reduce the HWM and to restore the space freed up storage space. I'm not so sure of SHRINKAGE.

  Any help greatly appreciated

  Thank you

  Jim

  They both adjust the HWM.

  Ask Tom & quot; Line high water & quot;

• How to pass data in the drop-down list to two separate outputs

  Hi all
  
  currently I have a drop-down list named chg with this value:
  ValeurRet += "< option >" + bean.getCode () + "-" + bean.getDescr () + "< / option >";
  Therefore, the value of my combo would be sth like this: 00000 - something
  
  the problem is that when I recover data return selected in the list, the value will be a string as above and not two separate the value.
  
  I need to pass the value here in order for me to compare the string containing the data in my database:
  nim.setCode (RutString.getParameterToString (request, "chg"));
  nim.setDescr (RutString.getParameterToString (request, "chg"));
  
  Now the data in my database is the following:
  Code: 00000
  DESC: something
  
  given that the above value is contained in the chg rather than the reverse, I couldn't use AS for my select statement.
  
  So is it possible for me this problem? Thnks in advance for your help!

  You can do two things:
  (1) pass the selection string from the sql query and use the sql functions (or pl/sql) to cut the chain and use only the part you are looking for (SQL has a SUBSTR function and others that allow you to do this)
  (2) you want to at any time in your workflow in a java class, you can do this with the String methods and the parts of the query string.

  Timo

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• Can combine two separate the AE project files to become a 'real' individual project?

  Can combine two separate the AE project files to become a 'real' individual project? I know that you can import a project into AE. But if you delete the original project your imported (outside), you also delete the project imported into your new project. I could have sworn there was a script or function that does this somewhere...

  Any help would be greatly apprecated.

  Thank you

  Thanks Rick,

  Bad choice of words on my part that I meant what you just described. Thanks for your clarification. However, I found the script I mentioned that if anyone is interested. It's called rd_MergeProjects

  http://Provideocoalition.com/mchristiansen/story/after_effects_script_of_the_week_rd_merge projects

  Kind regards

  Louis