The HP OfficeJet 6700 does support fax through a line of digital phone to StarHub in Singapore?

Similar Questions

• HP Officejet 6700 does not print

  I have a HP Officejet 6700 connected to my desktop HP w1858.  I can't the computer to send documents to print.  The printer icon has a yellow triangle with a! Select this option.  I tried to download a driver for HP printer, but it still does not print.  Windows does not list the HP Officejet 6700 (7100 & 6500 printers are listed).  Can I use a different printer model to obtain a class driver?

  Hi @katsus98040

  Welcome to the Forums of HP's Support.    I understand that you can't print from your printer Officejet 6700.

  I assume you see the exclamation icon is in your connected HP account.  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  If I have understood you please let me know so that we can you top and printing.

• The model Interface Toolkit does support the cRIO-9068 again based on Linux?

  Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:

  http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

  Thank you

  Hi Southern_Cross,

  Based on the readme:

  http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679

  It seems that it is now supported! These resources should provide a few more details:

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

  http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055

  Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.

  Kind regards

• The Compaq Presario CQ41 does support 64 bit OS?

  I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

  The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

  The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

• Always auto answer on my Officejet 8500 does not fax - tried all the suggestions.

  Hello

  I read a few messages with similar questions, but none that have exactly the same problem. Auto answer on my Officejet 8500 is on and there is a light.  I tried this turn by both pushing the button on the machine, as well as through the web interface.  I have put fax to send e-mails and not functioning properly.  The phone cord is plugged into the correct port on the printer and I use a telephone with 2 wires in cable and not 4 (some thought that the cord 4-wire has been the question but I do not know how it would make a difference).  I even tried to see if the machine to auto answer when the auto answer button has been turned off, just in case it worked in reverse.

  The fax can send as well as receive (so the cord should work) via sending e-mail function that I put in place.  We can receive faxes if someone is there to push a button, but no one is often.  Everything should work perfectly if she just automatically answer... which is essential to any fax machine in general.  Anyone know what could be the cause and how to fix it?  If we cannot get this to work, we get a different machine.

  Here are some statistics:

  Model: Officejet pro 8500 A909n

  Firmware version: DLM1FN0924AR

  Operating system: Windows XP Pro

  There were no changes to my system before that happened.

  Are there updates that could take care of this?

  Thank you!

  Hi ForeverFixing,

  Follow the steps described in the pages of 89 to 92 Fax to PC users guides.

  NOTE: Fax to PC and fax to Mac are available to receive faxes in black and white only. Color faxes are printed instead of be saved on the computer.

  User Guide

• OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

  Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

  The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

  So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

  The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

  Is this possible?

  Fozzie

  ShlomiL wrote:
  

  Hello

  To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

• OfficeJet 6700: HP Support Assistant messages will not delete

  On my taskbar, the HP Support Assistant icon has a yellow triangle.  When I open the Help Assistant, I see three messages.

  A message is on one out of question paper and paper for my printer power supply problem, the second is on HP printers cannot send or receive faxes, and the third is close to the fax failures.  All messages have been read, and then I click on the trash can icon to delete the message.  I get a message indicating that I have no messages, but does not have the yellow triangle.  I close the wizard for help, and the yellow triangle still does not go away.  Next time I open the wizard using the same three messages are there again.  How can I get rid of these messages other than the wizard for help uninstalling?

  I don't feel the problems mentioned in the messages.  I sent a fax this afternoon without any problems.

  Gary

  Hi Gary,.

  Did you follow the following steps?

  http://support.HP.com/us-en/document/c03467905#AbT4

  You see the symbol X as described? (as you have description seems different from that described by the article)

  You have the latest version of HP Support Assistant installed?

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.V6wFZa0ht_l

• HP officejet 6700 does not connect to internet

  New printer wireless HP Officejet 6700 Premium

  Product CN583A number

  He just took out of the box, set up,

  and got to follow the instructions

  on the Control Panel printer to complete the printer setup.

  The screen turned on but nothing else happened.

  On my lap top internet connection says

  no internet access, but my lap top works.

  Help, please. I don't know what to do. I am not computer smart.

  HI Shirleyoz,

  It's great to hear!

  If this does not resolve the question think about choosing the solution as "Accept as Solution" so that others who may be affected by this issue can find it.

• Wireless laptop can not find the wireless Officejet 6700 printer

  My laptop can't find my wireless printer Officejet 6700.  Printer is on the wireless network but the laptop cannot find it.  Laptop the wireless.  Have cisco router on my NBN skymesh satellite.  Have you tried printer setup in the control message panels reads:-printer is not found.  Using windows 7.  Have tried to use scan doctor, turning his router unpluging printer and electrical power to the router. Still no luck.  Printer is about 1 meter portable.  Do I have to set up a home network and connect like that.

  If you can easily plug the printer into the router using an Ethernet cable, who always beats wireless!  Try it!

• USB ports no-opperational in the Windows 7 environment, does not start mode command line safe

  Quick description: experienced difficulty trying to reformat a HD problem. It has been suggested that I have download the diagnosis of the manufacturer. Did. Restarted the computer as required to run the new program. After reboot, no USB port work Windows. Considering that all my USB inputs, it is extremely annoying. Input devices still work on other computers and still work during the start upward (before windows), also does not open in safe mode with the command prompt.

  I tried to reformat a LaCie HD that was previously used for a Mac for PC usage. Gave me a code 43 error and a problem code: 0000002B. Had a bad"block" in the HD somewhere read that I should try to use the manufacturer diagnostic tools to check the HD on.» Downloaded the "LaCie Update Tool" and installed it. It took a reboot. After the reboot, any USB devices worked. (Will begin another thread on the HD as soon as I have this problem.)

  Tried to restart in Mode without failure. Then the Safe Mode with the command of the DVD prompt. (However, I'm not 100% sure that I'm loading from the DVD, I couldn't find a good answer on how to do something so basic.) Always seems to load in the window 7 - always end upwards the newspaper account on screen - certainly no command prompt.

  The keyboard and mouse work on other systems and the keyboard works fine before the Windows 7 screen (the selection of mode that starts in) so I'm pretty sure that it is a Windows 7 problem. Can't really get in the error codes that I can't enter anything now or move the cursor at all. (I'll try to borrow a non-USB keyboard and mouse).

  After a reboot when it asks me what I want to start the computer in safe mode or normal windows 7, loading the drivers, it stops at:

  \windows\system32\DRIVERS\CLASSPNP. SYS

  I don't know if this is normal or the system stuck.

  I tried a manual reset of the motherboard and deleted manually the CMOS on the motherboard did not help - but don't expect really.

  I think I need to run a disk check / fix from the command prompt, but I can't even at the command prompt to the top.

  Thanks to anyone who takes the time to answer, a lot of satisfaction in advance.

  My system:

  Windows 7 64 bit

  ADM Phenom 955 Black Edition Quad

  ASUS 890FXA-UD5

  Microsoft USB wireless keyboard and mouse

  Less relevant stuff: ADATA DDR3 1600 G XPG 2 X 2 GB, Sapphire Radeon 4670 1 GB, Western Digital Caviar Black 640 GB HD, ASUS DVD/CD drive (DRW 24B1st) Corsair TX 750 W

  The Repair Mode command prompt supports USB devices. Here is how you get there:

  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. Select repair when prompted.
  5. Select the keyboard language when you are prompted.
  6. When you are prompted, select command prompt.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  The process described above is independent of everything that is on your hard drive. If your USB devices still do not work then you probably have a motherboard problem. If it is a desktop computer then you could by a 4 port USB card.

  If you get an account and password for the boot process then you dΘmarrez not from the CD/DVD. I've seen a number of messages in which people reported that they were unable to boot from the CD/DVD drive. Here are the most common reasons for these failures:
  -L' poster neglected the prompt to press a key to boot from the CD/DVD drive.
  -The CD/DVD boot was not a boot disk or was damaged. Use it on another machine has confirmed this.
  -Some BIOS setting was incorrect. Start with some other boot CD/DVD (for example here: http://pogostick.net/~pnh/ntpasswd/) confirmed it.
  -The CD/DVD drive has been damaged or is unable to boot from a boot CD or DVD.
  -The machine has a hardware problem (for example, a motherboard problem) which prevents start in any mode.

• OfficeJet 6700 how to fax multiple pages?

  I was looking at my manual, but I don't see any information on how to fax multiple pages at a time.  I have to keep the Redial and going though all this, and it will only send one page at a time.  Can anyone here tell me how more than a fax?  It is the 6700 OfficeJet and I usually use the copier part to send it.

  Now when you use the scanner should the page that you want to scan facing upwards or downwards?  I'm confused on this.  Thank you for reading my post.

  I get it now... Thanks a lot for your help.

• OfficeJet 6700 does not print Adobe pdf

  I have a brand new 6700 OfficeJet fine print Word documents. It will not print a pdf from Adobe. The printer begins to cross the motion, but stops and comes out blank. I converted the same file to the word and it printed like that. All other functions work well. All solutions?

  Hello

  Do not click on properties, you should see an Advanced button at the bottom of this screen, click on it.

  Check the print as Image option in this dialog box, and then click OK, to check if that helps.

  If you use another software that Adobe Reader and that you don't see these options, make sure claridy what application used to view the PDF file.

• The series Qosmio G20 does support PC2-5300?

  Hello all,.

  For some time now, I've thought about the possibility of an upgrade of RAM for my Qosmio G20 - 126 and all looking for a more economical way than that which is available via the Toshiba site (~ £100 for a 1 GB RAM Module!) I met articles suggesting that the Qosmio G20-126 is compatible with RAM PC2-5300 (333 MHz). To my knowledge the Qosmio G20-126 comes with 2x512MB PC2-4200 (266 MHz) modules installed, in addition to the direct available from Toshiba RAM upgrades are also PC2-4200. So my question for you, former scholars of the Toshiba support forum is simple; my laptop is REALLY compatible with PC2-5300? and if so there will be problems worthy of consideration (i.e. insufficient power supply etc...)?

  Also, I wonder if there are intrinsic advantages regarding the marked Toshiba RAM upgrades available via the site of Toshiba UK. I found the modules of RAM of the similar (at least as far as I can see) specifications for a third of the price. It would be also interesting to note that the model of module of RAM available here on Toshibas website is (according to Google products alias Froogle) same price when buying from third party suppliers (so it's not simply a question of margins exorbitant of Toshiba, unless of course the sellers are also defined on by the aforementioned increases.)

  Sincere greetings,
  Lee Hyde.
  ([email protected])

  Hello

  The Qosmio G20-126 supports a FSB 533 and, therefore, the PC2-4200 DDR2 266 MHz modules are! (DDR2 266 Mhz-> 533 MHz)
  It is absurd to use the RAM PC2-5300 DDR2 333 MHz due to the FSB. You won't see improvements in speed or performance.

  I wonder why you are surprised that Toshiba recommends the use of own products (memory sticks). I think that each manufacture recommend clean products!
  In addition, it is important to mention that brand memory modules are much faster and the performance is much better than the performance and quality of the nameless memory module.

  Of course, you can use all modules that supports hardware specifications, but the don t wonder about laptop performance and memory problems after the use of modules without a name!

  I use the modules of Kingston and I also recommend using these modules, because quality is really nice

• The e2000 wireless router does support jumbo frames?

  I can't find (unless I missed it) and in the e2000 on how documentation set sizes of frame of reference.  Is that supported?  If so, what are the steps?

  A fact important is jumbo frames are not compatible at a speed lower than 1000 Mbps

  I think that Linksys E2000 already has Gigabit Ethernet ports.

  And I think that you can change the size of the image on the properties of the Ethernet adapter if the card is a Gigabit Ethernet card.

• The last version, 23, does support the Roboform toolbar?

  I use my ROBOFORM toolbar every day. If I switch to Firefox 23 going to work again?

  I use the Version of RoboForm 7.9.0.0 and works very well with FireFox 23.0.1

  No problem