The model Interface Toolkit does support the cRIO-9068 again based on Linux?

Similar Questions

• Can I change the period of 'model' of a Simulink model running with the model interface toolkit (MIT) programmatically?

  I would like to be able to programmatically change the time step, a Simulink model uses when it is called by the model Interface Toolkit LabVIEW. The time step is a template parameter or a signal of model. Is this possible to do?

  It is not possible. The timestep for the model is fixed and compiled in the model. You can do things like relaxation model subsystems based on a value entry or event within the model.

• I can connect an NI MXI-Express RIO 9154 off the cRIO-9068 serial?

  I would use the cRIO-9068 a new system but will need a second wreath off the first chassis. Can I use NI MXI-Express RIO 9154? If so, how to connect the MXI cable until the 9068?

  Not the MXI Express, but you can use EtherCAT: chassis NI 9144 8 locations EtherCAT Slave for C series i/o Modules

• How compile/link xnet with eclipse for the cRIO 9068

  Hi all

  I use a cRIO 9068 with a NI9862 (DRUM unit).

  I'm programming in C/C++ with Eclipse on windows

  Without seeking to CAN access via xnet, the C app compiles and works very well on the 9068.

  Now, I want to use xnet functions to access the CAN.

  I found a nixnet.h in \Shared\ExternalCompilerSupport\C\include, then the compiler is convinced.

  But the linker can't find a library (I tried "nixnet" and "xnet") or don't find a library for cRIO xnet 9068 on my hard drive.

  Where can I find this library? Do I have to install another driver in addition to the normal driver xnet xnet (I installed, version 14.0).

  Thanks for your response in advance

  Hello!

  the driver Readme reads as follows:

  The NOR-XNET software supports Microsoft Visual C/C++ version 6.

  But for Linux-RT based targets (cRIO 906 x and x 903) in combination with modules XNET (986 x) I found a useful resource that indicates that you should be able to include the header "nixnet.h" (as apparently already do you) and ' link against libnixnet.so at run time to obtain the appropriate symbols.

  You should find the file according to the following folder:

  C:\Program Files (x 86) \National Instruments\RT Images\NI-XNET\Linux-armv7

  Best regards

  Christoph

• Compilation of Simulink with the model interface toolkit (MIT)

  Hello

  I am considering using the template Toolkit Interface to Simulink model in the LabVIEW environment. My question is about the process of compiling Simulink. To correctly compile the Simulink model in a DLL and then wrap it with the API from MIT the build process should take place on a machine that has the two LabVIEW Matlab/Simulink AND with MIT?

  Which means, is it possible to have Matlab/Simulink, on a single machine (typewriter), a license to some developers (devA) and on another machine (machine B) has a license of LabVIEW, a license to another developer (devB). Portion of the CAN the LV at MIT be installed on computer B and part of Simulink at MIT be installed on the machine as the developer can compile the simulink model in a DLL and then pass to developer B to then wrap it in LabVIEW? Or is the string of tools such as Matlab/Simulink and LabVIEW must be on the same machine. That means, a developer must have these two licenses?

  Thank you!

  This help document can help you get started with the compilation of a model for use on a target of cRIO VxWorks. You don't need to have your target available for the compilation model, or write your application to MIT. You only need the target to deploy and run the model (obviously).

  As described in the help link, you will need to download a compiler appropriate for the compilation of the VxWorks model. A free version of the GCC is linked to this document that you can download. You will need this compiler and the framework subcomponent model of MIT to compile the templates.

• simulation interface toolkit?

  Hi all..

  I have installed LV2014 & model Interface toolkit... but I can't find the function to SIT in the tool Menu,

  Where can I install SIT?

  Thank you!!!

  Simulation Interface Toolkit was the Toolbox that you used to call the models, but since LabVIEW 2013, it has been replaced by the model Interface Toolkit.

  https://decibel.NI.com/content/groups/product-pulse/blog/2013/10/07/adieu-LabVIEW-Simulation-interfa...

  http://digital.NI.com/public.nsf/allkb/5DEFB2A2429BDB6286257C13006BFFC8

• GigE vision on OR cRIO-9068

  Hello:

  We are planning a project in which we intend to use embedded vision and transformation of vision GigE cameras. Our client is interested in the cRIO-9068 embedded platform.

  The question is: is there support for GigE Vision on the cRIO-9068?

  I can't find a document that says, so I guess that no public support is granted. If this is the case, I would like to know why.  I think that the VxWorks targets do not GigE support, but this cRIO running Linux. From the outside, I think it would be possible to provide a GigE for Linux support.  The only devices that seem to favor GigE run Phar Lap ETS.

  Thanks in advance for your kind reply.

  Just to answer he question, the 9068 does not support GigE Vision. Layer MAC Ethernet embedded on the chip of architecting it uses does not meet the requirements of GigE Vision (similar to the old cRIOs VxWorks/PPC).

  The 9068 does support USB3 Vision cameras via its USB 2.0 port well and a lot of GigE Vision cameras have identical models in variants of the USB.

  Eric

• cRIO-9068 & OR-time

  I have the system test with a cRIO-9068, a cRIO-9024 (w / 9114 chassis) and an expansion chassis 9146.  None of them are even near being synchronized, and it's a bit frustrating.

  How can I synchronize the 9024 grid and the grid 9068?  I have NEITHER time installed 1.3 on 9024 system, but I don't see an option for time installed on the cRIO 9068.  CRIO-9068 does support the IEEE-1588 protocol software provided by the addon of NOR-time?

  In the meantime, you could Explorer using an implementation open source on the 9068, like Pgwp1588. With this solution, I think you should probably reach synchronization on the order of tens of milliseconds.

• Call to a shared library a VI on a target NI Linux RT (cRIO 9068)

  Hi, I wrote a very small shared library (.so) with Eclipse (toolchain 2014), which essentially serves as a wrapper for more complex, but I am having problems with the call go to in LabVIEW RT on a target Linux RT - specifically, the cRIO 9068. First: the library was copied in/usr/lib and ldconfig has been correctly implemented. More important yet, I have also written a C program (using Eclipse as well) that calls the single function currently implemented in the shared library: this works perfectly, both in Eclipse and you connecting directly on the cRIO with a Putty terminal. So I guess the shared library itself is ok and can be called from code/external programs. Now, dating back to LabVIEW (2014 here btw). Here's where things get difficult, I guess. Initially, I had the symptoms listed here--> http://forums.ni.com/t5/LabVIEW/How-to-create-a-c-shared-library-so-for-linux-real-time-for/td-p/302... who prevented me from actually run any code on the target of RT. Then I changed the call library function node: various tutorials suggest to put name_of_library.* in the path text box or the name of library, but unfortunately it doesn't seem to work, so I had to put the name and the extension too. But it still produces the error below ("the name of the function is not found" etc.) So I check the box 'specify path on diagram' and add/usr/lib as a parameter to the node library function call: now the VI can work and is actually transferred to the target of the RT... but the cluster of output error returns error 7, which is a kind of "File not found" error. However, I believe that this error message is misleading: indeed, if I try to debug remotely this library shared under Eclipse, I am actually able to pause it. and when I press the Pause button on the debugger, the goal of RT VI pauses, then continues as soon as I press the Resume button, I'm stuck... I tried searching forums and Google as well, but I have not yet found a solution. Any ideas on what's going on? Moreover, I can add more details if needed.

  Problem solved, it was a bad configuration of the node library function call which prevented the actual library (.so) to be called.

• The S7-393 2015 model does support pen or touchscreen finger only please?

  Hello

  I tried to ask this question via live chat, but I couldn't get a sensible answer. The S7-393 2015 model does support pen or touchscreen finger only please? If she supports the stylus the laptop come equipped with one, or if not, what is the best buy

  Thanks for help

  pwoodroffe,

  I searched a little bit with our engineers and this laptop uses a capacitive touchscreen, a capacitive stylus would be the type to use.

• cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

  All,

  I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

  "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

  Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

  AGJ,

  Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• HP Envy 700-214: the HP Envy does support the 750 Ti FTW Evga GTX edition?

  As the title suggests, the edition of 750 Ti GTX FTW Evga does support my office? I am currently engraged by the integrated graphics card because I can't run games on the settings I want and instead I have to stay with the lowest settings. I don't know if my BIOS version is supported by the card. I have again the dinky power came with the computer and if someone can tell me if it has the connector 6 - pin PCIE, which would be lovely. Also, it would be great if someone showed me a picture of the 6-pin PCIE if there. I thank you for reading, have a nice day!

  Hello

  Your PC should be able to support the NVIDIA GTX 750.  Generally the NVIDIA GTX 750 with a few exceptions only requires a 300 Watt power supply.

  HP 460 watt power supply has a PCI-E power connector 6 pin.

• X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  Hello
  Basically, Yes to your question.

  For more details;

  IMM2 Web GUI access via browser and see environmental specifications tab in the server properties menu.
  There are two types of threshold, "Higher criticism" and "upper Fatal".

  If goes on "Higher criticism", then a soft stop will be initiated, where the next depends on your operating system of his behavior causing shutdown graceful or not progressive.
  If more higher jumps "Upper Fatal", then a hard stop will be engaged, which is not a normal shutdown of the typical operating system perspective.

  Kind regards

• MAX does not see the cRIO modules!

  Hello

  I have a cRIO-9073 and C 3 (9401, 9239, 9263) modules installed in slots 1-3 respectivly. I can configure the chassis correctly upon arrival 2 months ago and I managed to acquire by a module 9234. Now that the 3 mentioned c modules arrived I installed and have a problem - MAX of nothingness, or analysis of LabVIEW RT engine cannot see modules. Attached are MAX.png and DiscoveryStatus.png that depict. NOR-RIO is version 4.00 and corresponding set is completely downloaded to the cRIO. I do not understand the concept of software cRIO yet but I'm positive, that is the same as used to work the first time that I had tried. The network is OK - host is 100.0.0.1, cRIO is 100.0.0.100 and they see.

  I susspected that perhaps specific drivers are needed for these particular C failet, but I can't verify that the status of software.

  Basic details to accept and understand the CompactRIO concept is spread across many different documents, and it's really hard for the newbees to grasp, so debug/fix situations.

  Does anyone have an idea what is causing my problem?

  Thanks in advance,