The ICS update failed. Phone cannot turn on.

Similar Questions

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"- by a loop for hours, unable to get to the start

  Hello.

  First of all, I read this page - http://support.microsoft.com/kb/949358

  It says this - "Note if this problem occurs, it may take 30 minutes to undo changes, and then the system will display the login screen Windows.»

  But this is not true for me, I have nowhere near the logon screen. Earlier the PC rebooted, but is IMMEDIATELY returned to the exact same failure screen. There is a line.

  A few notes:

  (1) it is a G46VW mobile computer ASUS 'Republic of gamers ". I had 3 days. There is no DVD drive so I can't use any kind of boot disk.

  (2) I have no attached removable media.

  (3) I don't know how to get to any screen except that this form of failure, so do not know how to enter in a single command.

  (4) all that happens is that I see the ASUS logo, then this screen failure immediately.

  I'm panicking, it's all new. It has worked very well. I started it today, it has been updated slowly. I saw him at about 17%. Then I looked at a few hours later and saw that he was stuck in this process.

  What can I do?

  Hi James,

  I appreciate your patience and manual labor.

  You can follow the steps in the link below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

  1. Go to Start creen and type regedit.
  2. Select regedit , then right-click on the screen.
  3. Click run as administrator.
  4. Right click on computer , then click export.
  5. In the Save in box, select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.
  6. Click Save.
  7. If something goes wrong, you can do a right click on the registry backup file and click on Merge.

  Write to us at the State of the question.

• Message loop "the configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. »

  I had to edit this post, because I was the lack of information on my problem...

  Well that's even once...

  I decided to give maintenance to my laptop then I formatted last night then in the morning, I started today with the updates of windows (was the first thing I did, so I haven't installed programs). It started to download as 110 updates, when you're done, asked me to restart, and I did. As at other times, it configures the first 30% before restarting, and when it restarts then got stuck in the message of "Configuration of the Windows updates... failure. It takes like 20-30 minutes to restart, and when he does, still happens once, I mean the restart and the same message. So I can not connect or anything.

  Some features:
  Laptop: Toshiba Qosmio x 875
  Processor: Intel core i7-3630QM CPU 2 .40GHz
  RAM: 12 GB
  System: Windows 8 64-bit
  GPU: Nvidia GTX 670M / 3GB
  2 500 GB HARD drive, don't know the model or brand
  I have not yet installed antivirus, in fact I uninstalled Norton to install Kaspersky later, but I'm stuck with the real problem.
  I bought this laptop as 14 months ago, is the first time the problem appears.

  I have not tried certain steps of the links because some of them need to connect.

  Thank you, hope someone can help me.

  See this thread for assistance:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/9205aaba-BAfD-4760-8cae-26c82695136a

  Added: http://support.microsoft.com/kb/949358/en-us

  Perform a restore of the system (Windows 8, Windows 7 and Windows Vista)

• The issuance of the ICS update

  Hello

  I would like to upgrade my S Arc at ICS, but I have questions.

  I tried with PC Companion, but an error pops up during the 2nd step 'Prepare' (see image below).

  

  I tried to use the software "Update Service", but nothing happens when I press on and hold the Back button when connecting my mobile to my PC.

  What it is supposed to happen when I take the key Back down?

  I even reset my phone to factory settings, but it has not changed the problem.

  Does anyone have an idea of what's going on?

  See you soon,.

  Hello

  It may be because of overloaded servers

  Try to use the update service, disable firewall and antivirus, or start the pc in safe mode with networking on

  First of all update race services > select your mobile > wait until it asks you to connect, > turn off your cell phone and insert the usb cable to your mobile phone

  Now hold back button and insert the other end into the computer

  Follow the direction.

  See how it goes

• Windows Update restart computer - cannot turn off

  even since a recent update (2-3 weeks ago?) my computer would restart on its own investigation, I discovered this automatic update seemed to cause reboot... I turned to THE and it seemed ok for a few days, but he's back... this happens about twice a day... Here's the log to THE most recent, to reset...

  2010-05-24 21:57:08:015 808 ff4 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2010-05-24 21:57:08:046 808 ff4 Misc = process: C:\WINDOWS\System32\svchost.exe
  2010-05-24 21:57:08:046 808 ff4 Misc = Module: C:\WINDOWS\system32\wuaueng.dll
  2010-05-24 21:57:07:968 808 ff4 Service *.
  2010-05-24 21:57:08:046 808 ff4 Service * START * Service: Service startup
  2010-05-24 21:57:08:046 808 ff4 Service *.
  2010-05-24 21:57:10:890 808 ff4 Agent * WU version 7.4.7600.226 customer
  2010-05-24 21:57:10:890 808 ff4 Agent * Base Directory: C:\WINDOWS\SoftwareDistribution
  2010-05-24 21:57:10:968 808 ff4 Agent * access type: no proxy
  2010-05-24 21:57:11:031 808 ff4 Agent * network state: connected
  2010-05-24 21:58:06:156 808 ff4 Agent * Agent: initialization of Windows Update Agent *.
  2010-05-24 21:58:06:203 808 ff4 Agent * Agent: initialization of the global parameters cache *.
  2010-05-24 21:58:06:203 808 ff4 Agent * WSUS server:
  2010-05-24 21:58:06:203 808 ff4 Agent * state WSUS server:
  2010-05-24 21:58:06:203 808 ff4 Agent * target group: (Unassigned Computers)
  2010-05-24 21:58:06:203 808 ff4 Agent * Windows Update access disabled: No.
  2010-05-24 21:58:06:343 808 ff4 DnldMgr Download manager restoring 0 downloads
  2010-05-24 21:58:24:593 808 ff4 to THE # to THE: initialization of automatic updates.
  2010-05-24 21:58:24:609 808 ff4 to THE setting according to sqm report timeout at 2010-05-25 02:58:24
  2010-05-24 21:58:24:640 808 ff4 to THE # to THE disabled through the user preference
  2010-05-24 21:58:24:687 808 ff4 to THE initialization feature updates
  2010-05-24 21:58:24:750 808 ff4 to THE Found set 0 cached updates featured
  2010-05-24 21:58:24:750 808 ff4 to THE delayed finish to initialize
  2010-05-24 21:58:27:703 808 ff4 report * report: initialization of static data to report *.
  2010-05-24 21:58:27:703 808 ff4 report * OS Version = 5.1.2600.3.0.66304
  2010-05-24 21:58:28:296 808 ff4 report * computer brand = INTEL_
  2010-05-24 21:58:28:296 808 ff4 report * computer model = D945PVS_
  2010-05-24 21:58:28:296 808 ff4 report * Bios revision = SN94510J.86A.0065.2006.0116.1603
  2010-05-24 21:58:28:296 808 ff4 report * the Bios name = default system BIOS
  2010-05-24 21:58:28:296 808 ff4 report * the Bios Release Date = 2006-01 - 16 T 00: 00:00
  2010-05-24 21:58:28:296 808 ff4 report * locale 1033 = ID

  No update won't download/install on your computer from WinXP SP3 until you have re-enabled the automatic updates; CF.http://support.microsoft.com/kb/306525

  That being said, if THE is disabled (and your newspaper says it's), to THE is not causing restarts it.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Open Internet Explorer on this page & run the difficulty: http://support.microsoft.com/kb/980966 what do you get?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Configuration of the windows updates failed, returning error Exchange

  I have a laptop windows 8.  Whenever I run windows updates, I get the error message "failed to setup of the windows updates, returning error changes.  I tried the windows update troubleshooting tool and download the updates manually but still no change.   Is there a solution to this?

  Thank you.   Often, when I try to run windows updates I get error like 80242FFF codes; 800703F1.

  Hi Zurkon,

  Thank you for your update on the issue.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing. Windows has tools that can help you solve this problem of troubleshooting. I would suggest trying the following methods and check if the problem persists.

  Method 1: Run the Windows Update Troubleshooter

  • Run the Windows Update utility, then open Windows Update and try installing the update again.

  Method 2: Run the DISM tool

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  2. Enter command prompt in the search box.

  3. In the list of results, slide down on or right click command prompt, and then press or click Run as administrator.

  4. In the administrator: command prompt window, enter the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exit and press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• The cube update fails with an error below

  Hello
  
  We are facing this problem below when planning application database update. We've been refreshing the database daily, but all of a sudden the error below appeared in the newspaper. The error is something like below:
  
  
  The cube refresh failed with the error: java.rmi.UnmarshalException: error demarshalling return; nested exception is:
  java.io.EOFException
  
  
  During the updating of the database is manual workspace, the updating of the database that happens successfully. But when the unix script, its lift the above error.
  
  There is some question related provisioning for which the user has been removed from MSAD? Please help me on this.
  
  
  Thank you
  Mani
  
  Published by: sdid on 29 July 2012 23:16

  have you tried restarting the RMI process for planning and then check that it runs without a doubt 11333 port

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have again to win 8 pc. PS 64-bit does not install correctly. get the error update failed

  I install on a new pc win 8 PS CC. I think it installs, because I can open it. But on the CC site, when I press the button to update, the update fails.  told to try again. fails. I have all the drivers to date and updates of windows 64-bit win 8.

  I'll answer my own question in the hope that it helps someone else. I had the problem immediately after installing PS CC.  Once I restarted the computer and tried again, it worked.

• HELP the important updates fail to install-(KB951550, KB949046, KB967642 KB951944)

  • HELPremember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I had trouble with these updates to install... the above is 4 of 5 failures:

  I have files cleaning, registry clean up and tried manually download the 5th of the 5 failures of Microsoft office was updated for service pack 1 all went fine til one message said I had already had this update.  Still, it appears in the window to update for important updates.

  If it's important I downloaded Microsoft Project 2007 60-day trial 2 days ago...?
  Help

  See the section "How to get help", for example, http://support.microsoft.com/kb/951550

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update continues to send the same updates. Can not turn it off.

  Update continues to send the same three updates. I have install and the update comes with the same
  updates.

  Go to windows update and disable the updates that you have already downloaded, if they managed before.  And then on the update contained a right click on it and select Hide update and this should get rid of your problem.  It is a Microsoft problem they are working on but it won't work you will always receive other updates, but not those that you have hidden.

• Why the driver update fails with the error code 800705 b 4 when I try to install the latest video driver for my Dell vostro Intel computer laptop?

  Windows Update tries to update the Intel driver newly released my laptop Dell Vostro 3750.
  I get error code 800705 b 4 every time.
  Any ideas as to the cause?
  I get system freezes lately and want to make sure I have the latest drivers for all my hardware before contacting Dell technical support.

  Thank you.

  Robert.

  Also, check your windows update settings and provide recommended updates is not selected for the automatic update, but only the important updates.

  Aside from not not using drivers available under recommended updates, for all other first check the details as to whether its relevant for your specific use.