the idle device timeout notification

Similar Questions

• How the idle connection timeout attributes in weblogic works?

  Lets say if there is a connection leak in my application that runs on the weblogic Server 10.3.4 and I must find the connection is not closed.
  After going through a documentation I found out that the connection timeout inactive parameter to a positive value can solve this problem.
  With the definition of the attribute preceding the server weblogic will close all connection object that remains inactive for the specified number of seconds, or it is only
  These connection objects that has lost all references to it?
  
  which shows the query by example.
  Lets say I have two con1 con2 & connection objects from a data source defined in the weblogic.
  time-out was set to 10 seconds.
  In a given thread to say con1 performs a db operation and then once, con2 is used for another operation db for more than 10 seconds.
  The con1 object will be always available for the operation of the db, or we take a fresh connection to the pool?
  
  Thank you
  Gordon
  
  Published by: user779368 on May 30, 2011 06:29

  If you are waiting for a query/update complete, it is not idle.
  WebLogic knows you're busy. It is only to have a connection and
  really not using which will cause WLS to resume.

• The Idle Application and Session Timeout value

  I use Apex 3.2.
  
  I found the following instructions to set the idle times and session of the applications.

  http://st-curriculum.oracle.com/obe/db/11g/r2/prod/appdev/apex/apexsec/apexsec09.htm#t5

  Once I had finished the instructions, I logged, as indicated, but when I log in I go directly to the page Timeout.
  
  Anyone who has used these instructions or can point me to a few more accomplished.
  
  Gus
  
  Published by: Gus C November 3, 2011 06:36

  Hello

  Close all open browsers.
  Open the browser and to connect to the generator of the Apex. Run your page. You land at session timeout page?

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• USB 3.0 Port at random times out the error "semaphore timeout period has expired.

  My USB 3.0 port randomly shuts down completely. I sometimes get a message that says "the semaphore timeout period has expired." I disabled USB selective suspend and verified that the port is functional (Device Manager) and even used my drive hard/USB stick/mouse wireless mouse in the regular USB 2.0 ports. 2.0 ports both products I work very well. Moreover, the stop device, is not related to the volume or type of media, that I'm going through. Yes, any driver alone on my computer is 100% up-to-date (from validation). How can I change this? I feel that I lost all the money on my new USB 3.0 hard drive.

  Windows 7, 64-bit.

  I also had the same problem and host controller Renesas usb3.

  I went to the site intel and downloaded this driver

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19880&lang=eng

  My driver usb3 was updated according to Microsoft and Lenovo.

  Former pilot was 2.0.32.0 according to Lenovo.

  My external drive USB3 now works correctly and not cut or hang PCs.

  No help on Microsoft or Lenovo websites regarding this issue, but it is a HUGE problem.

• unlimited time-out, but the idle time-out is 30 minutes per session

  Hi all

  I connect with client Anyconnect for an ASA5510 (8.2.1 (11))

  In group policy, I idle timeout = unlimited, but if I control the session in asdm and the command line

  I find idle timeout = 30 minutes.

  If I insert idle timeout = 60 in politics, in the session I see Idle timeout = 60 min.

  Is only a problem in the visualization of the session?

  Defining the 'vpn-idle-timeout none' group strategy is a misunderstood command. When it is set in group policy, it does not neutralize the idle-timeout. In the past, I filed a bug in order to clarify what this setting (see CSCsm15079) to clarify the misunderstanding. In more recent versions of the code with bug fix, context-sensitive help for command now correctly explained:

  ASA(config-Group-Policy) # vpn - idle - timeout?

  orders/options mode group policy:

  <1-35791394>Number of minutes

  No IPsec VPN: disable the time-out and allow indefinite idling;

  VPN SSL: Use the value by defect-idle-timeout

  When set to none, and you are using SSL VPN, this means that he will inherit the default-timeout defined under the Webvpn config. The default value for this command is 30 minutes, so that's probably why ASDM displays 30 minutes. If you want to adjust this value, it can be changed with:

  conf t

  WebVPN

  by default-idle-timeout

  If you want an 'unlimited' idle time, must be defined the vpn-idle-timeout in group policy for a specific number instead of "none" - the maximum that you can set to the vpn-idle-timeout command is 35791394 minutes (something like ~ 24000 days or essentially unlimited).

  Please note this post and mark it as resolved if he addressed the issue.

• problem on the recording device (Skype)

  I WOULD SETUP JUST THE LATEST SKYPE ON MY LAPTOP WITH THE WINDOWS OPERATING SYSTEM 8. I TRIED TO VIDEO WITH MY SISTER AND WHENEVER I DID A VIDEO CALL, IT WAS JUST TO HANG UP IMMEDIATELY AND THERE WAS A NOTIFICATION 'PROBLEM ON THE RECORDING DEVICE '. I HAD FIXED NO POSSIBILITY IN SOUND AND RECORDING DEVICES ON MY LAPTOP. BUT IT SEEMS NOTHING WRONG WITH THEM. YET, I COULDN'T MAKE A CALL WITH MY SKYPE VIDEO. HOW TO SOLVE THIS PROBLEM? Thank you!

  Hi Walter,

  Please post your query in the communities of Skype.

  http://community.Skype.com/?category.ID=English

  Thank you

• Cannot delete the bluetooth device in Windows 8 RTM (running on MacBook Pro)

  My office uses Macs but allows employees to use BootCamp to run both environments. I was able to add a pair of headphones bluetooth without problem, but now can't remove them in order to re-pair.

  The event viewer shows:
  Withdrawal of the device node 'BTHENUM\Dev_001816064C73\a & 383f14a7 & 0 & BluetoothDevice_001816064C73' failed with error code 0 x 80070490.

  I've never seen that happen before, and can only find references error code 0 x 80070490 Windows Update problems.

  Ran sfc/scannow, but came back clean. Any ideas/suggestions?

  The same thing happened to me when I tried to remove a bluetooth mouse, so that I can add another.

  I tried the above solution presented by Angela T., as he made a lot of sense, but which still has not worked for me and the old mouse maintained reappear.

  The problem I encountered was that I was using the Bluetooth devices icon in the box 'Notifications' from the background toolbar on the desktop (i.e. the lower right part of the screen where things like time, volume, etc., are displayed).
  For some reason, try to remove the mouse open bluetooth devices window through this icon is mess up every time.

  I managed to make it work in the pop-up toolbar that appears when you place your cursor in the lower right of your screen and clicking on 'settings' (the icon that looks like a gear) and then by clicking on "change pc settings" at the bottom.  This brought me to the 'Pc settings' window where I could add and remove devices.  Now when I tried to delete the old mouse and add the new to here, it worked perfectly fine.

  Crazy, I know, but it fixed the problem for me.

• Audit in two stages on the same device? !

  After upgrading to Mac OS Sierra the next thing happened:

  When I tried to sign in the community Apple with my Macbook Pro, I had a request of two steps and was invited to enter the 6 digit code that 'someone was trying to use my Apple ID to a place near me'... about 300 Km.

  I agreed, but the strange thing is that I got the 6 digit code on my Mac, where I had to type.

  Very easy process, but what is the meaning of this if I get the same code that I have to type on the same device? !

  I was a believer to receive on my iPhone or by SMS.

  There is something strange about this event?

  This scene reproduced whenever I tried to connect to the Apple community, until I checked "remember this browser.

  Tnxs.

  I arrived as well. My guess is that your mac is the only device approved for now, so the only option for apple is to send the code.

  If you go to ibutt settings in system preferences and click on account details, you can see which devices are approved under the devices tab. For me, it says my iphone is not usable as a trusted device, and I did bother to see if I can change this again, but I guess it can be done somehow.

  Edit: I just stumbled upon a thread discussing the same thing and found this answer, that solved the problem for me: Re: why Apple showed the authentication code to two factors on the same device that I connect to?

• After update to Sierra, Mac does not connect to the ReadyNAS device

  I have two Macs at home - an iMac and a MacBook Pro.  I also have a ReadyNAS device, which acts as a time for both Machine.

  I've updated the iMac to macOS Sierra.  The upgrade went smoothly, no error reported.  However, once it was up, I found that the iMac has questions is authenticating with the ReadyNAS via AFP (and / or he would authenticate, then delete the connection) and also not able to connect to the service of Time Machine on the ReadyNAS device.

  To be sure it wasn't the ReadyNAS, I went to my MBP - it still works under OS X 10.11 and shows all the problems.  AFP shares are accessible without problem, and Time Machine works as expected.

  Has nothing changed with Time Machine or AFP protocols under macOS Sierra, which could cause this?

  The ReadyNAS is a ReadyNAS Pro 4, running 4.2.28. firmware, if it is useful.

  Thank you very much for your help!

  AFP is not used by Sierra. Try using SMB instead, if your NAS supports. Or contact the technical support of the manufacturer for assistance.

• data synchronized and merged from all of the added devices?

  Is the first device I sighn in too the device main leader of all computers that will get the data? or they all merge together?
  I mean, I have two computers, a netbook and a laptop.
  The laptop is one that has all the correct addons and preferences and bookmarks, I just need things to sync on the netbook.
  Thank you:
  With regard to:
  Melissa Cox.

  The data of all connected devices will merge on the server and will be distributed to all necessary devices.

• I accidentally deleted the iCloud device (my iPad not lost or stolen... but it's very very locked down)

  So, I accidentally deleted the iCloud device (but my iPad is not lost or stolen). This all started because I forgot my password and I want to reset the unit. In the process, I have deleted my camera from the iCloud website (stupid self-help sites and my idiocy). in any case, I am about to connect my iPad to iTunes so that I can update and restore my device (which will erase my password and give me a new start... right?) BUT I don't know if I actually restore since, as I said - I deleted icloud . Before I go ahead and update/restore via iTunes, I want someone to confirm or deny or not I'm completely screwed and all my stuff was gone. While I can start crying now rather than later.

  Thanks in advance.

  See the following: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

  We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

  Hi there, therex!

  It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

  Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

  Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

  Thank you for using communities of Apple Support and have a great day!

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• iPhone Sync with PCI trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  I am trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  Mac or Windows?