Failure of Windows xp Setup

Similar Questions

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• FAILURE OF WINDOWS UPDATE SETUP

  by mistake my roommate forcefully shuts my computer by updating windows and now I'm having the update configuration failure, even if the update of windows are installed... Please help me

  Hi Johny,

  If you use computers OEM (original equipment manufacturer) and if you have the recovery with the hard drive partition, then I suggest you to restart the computer once or twice so that it will boot to the recovery options.

  Auto repair can detect and solve certain types of problems in the system that might be preventing Windows to start.

  To run auto repair using preinstalled recovery options:

  1. start WinRE. To do this, you must allow the system to the failure of the process of starting three times.
  2. in her choose an options screen, tap or click Troubleshooting.
  3.next, press or click Advanced options, and then press or click on auto repair.

  Automatic repair will launch and try to resolve problems that prevent Windows from loading.

  If you are not able to boot to the recovery environment, then you must contact the manufacturer of your computer and get the recovery media.

  Post us the results after trying the steps above.

• Windows 7 Home premium install the update. When I reboot the update tries to install, but fails. I get the message "failure of windows update Setup, reverse the change.

  I tried to copy the CBS.log to a folder, then opening the files to search for an error code. I couldn't find any error code. These files are large I can remember something small.

  Try this first: -.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If no joy, then

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. follow the links in the dialog box of Windows Update as more information or help and Support to try to resolve the problem or post back with more information on what the error code can be.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• Portege Z830 - BSOD, windows XP Setup

  Hi guys/girls,

  Been trying to install windows XP on this machine to an internal user, unfortunately we have this machine to use XP. However, I get a blue screen during windows XP Setup.

  I downloaded the AHCI drivers for windows XP on the toshiba site and load them during the installation of windows XP, but get the same blue screen.

  We also loaded into the bios and tried to change the mode of the sata to IDE controller, but it is greyed out and we cannot change it (I think it is in the ssd, but I could be wrong)

  IM currently stuck right now and don't know how to proceed, there are windows XP drivers available on the Web site for this computer toshibas but I can't get installed it, there must be a way to install it.

  Hello

  > I downloaded the AHCI drivers for windows XP on the Toshiba site and load them during the installation of windows XP, but get the same blue screen.

  What Z830 Portege do you have exactly? I check the page pilot European Toshiba drivers Win XP for Portege Z830 but did not find a?

  Are you sure that you have downloaded the driver AHCI compatible?

• Windows 8 failure configuring Windows updates: my sytem keeps refusing to upgrade.

  Whenever I try to load the Windows updates, that it goes through a process at length check and then refuses to load.  It then goes through another process at length:

  Failure of Windows dates

  Restoration of the changes

  Do not turn off your computer

  How fix us this problem?  I would like to upgrade to Windows 8 to 8.1, but the system keeps refusing the upgrade process.  Do I need new drivers Windows installed?  I do a lot of graphic work.  Would be the removal of the player above: AMD driver miniport multi-vendor affects the use of my graphics card?  Just bought the 23 inch want all-in-one model: 23-d203d with intel i7 - 3770 s processor 3.10 GHz with 4 GB 64-Bit system

  Thank you for your help and suggestion.  I used the format of trouble shooter.  He made a few corrections and some updates have been installed in the difficulty but also said there are 2 corrupt files do not set. Do not understand how this can be in a whole new system. Anyway I still can't upgrade windows 8.1 store.  Have any suggestions or should I just leave him alone, as is?

• Failure of windows updated y580 configuration

  I get the message "failure of windows updates changes to return" when I try to update my computer, can someone please help with this? How can I make sure that updates are going through?

  ' afternoon.

  Please check if KB2647753 is in your list of updates to install. If so, install everything first, everything about him with no other update selected. do a required restart. Once installed successfully, all others must succeed. It is a known Microsoft issue.

  Please let us know if it works for you.

  Kind regards.

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Failure of Windows 8.

  After 2 days with the Iconia w510 I'm paranoid more step in obscurantism which is windows 8 and long for my damaged water Asus TF101 the w510 was supposed to replace.

  All was not lost, then I thought, there are many options for an x 86 platform, the decisive factor for the w510. To see that the UEFI is locked in safe mode, which means that you can never run a signed picture windows 8. My question is, will this be corrected? If the answer is no, I'll certainly be request the refund and purchase also.

  L3xi

  There has been previous discussion of the locked mode on this forum.  Interesting to read quick to give you more insight as to the future development of most of the manufacturers.

  You seem to be satisfied with Windows 8, so that a return seems to be the obvious answer for you.  This isn't really a failure of Windows 8, Windows 8, it is what it is.

  Sort

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• failure of Windows 10 with modern configuration host has stopped working

  Windows 7 pro I failure of windows 10 after download, download, then crossed the preparation... get updates... check your pc is where message appears "modern facility host has stopped working... a problem caused blocking the program working properly." Windows will close the program and notify you if a solution is available. »

  Cancel the update level or if necessary, hold the Power button to turn off the PC.  Wait a half hour, then power turn voltage to see if it continues or rear rollers.

  If it cancels and then work done these steps for overcome Windows Upgrade failure - Microsoft Community 10.

  If it crashes again and/or don't roll back you can try here, whatever the method works to access Advanced Startup Options in Windows 10 to see if you can get into Safe Mode troubleshooting options, Startup Repair, Go Back or Reset.

  But I would cut my losses and the vastly superior Clean install Windows 10 improvement who will be activated from the last version media after install as explained in the Wiki.  Be sure to start the media to remove all partitions to make cleaner as illustrated.

  If you have files that were backed up not you may rescue files when Windows does not start

  In return ask questions and let us know how it goes.

• Windows 7 Pro for Windows 10 Setup error

  WindowsUpdate_C1900101""WindowsUpdate_dt000"

  I try to install Windows 10. Running Windows 7 Pro

  1. http://windows.microsoft.com/en-au/windows-10/upgrade-install-errors-windows-10

  and/or

  2. http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-windows-10-setup/eba3c864-d9fe-4f8e-9468-81b1f89473ed