The installation of Acrobat 9 suddenly stopped working

Similar Questions

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• copy to hard drive during the installation of Encarta 2001 WA stops working after the folder has been created on HD

  Encarta World Atlas 2001

  Hello pledliec,

  I didn't know that encarta World Atlas 2001 listed in the Windows Vista Compatibility Center. So it probally is not compatible with Windows Vista.
  You might see if the compatibility mode to operate.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  Run the program compatibility Wizard

  1. Open the program compatibility Wizard by clicking the start, clicking Control Panel, clicking programs, and then clickingUse an older program with this version of Windows.

  2. Follow the instructions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  To change compatibility settings manually for a program, right-click the icon of the program, clickProperties and then click the Compatibility tab.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Acrobat 9 suddenly stopped working (Mac OS)

  -When I try to open I get a dialog window that says "the application" Adobe Acrobat Pro' cannot be opened "" icons appear normal - but when I try to uninstall using the uninstall program provided - I get the same problem. No luck trying to re - install or uninstall/reinstall from the CD.  Help on an iMac with OS X worm: 10.10.5 (14F27)

  Hello

  It is because of the compatibility issue. Acrobat 9 is compatible with the

  Mac OS X v. 10.4.11 or 10.5

  You can see the following link for more details.

  ucts.html https://helpx.adobe.com/x-productkb/Policy-Pricing/System-Requirements-Acrobat-Family-prod

  Concerning

  Sukrit diallo

• After you create a site in recent months, the effects of scroll have suddenly stopped working in preview mode and publication.

  Hi all

  I fortunately worked on the Web site a page of simple Parallax for the last few months working on it and style stable thanks to a test site of Business Catalyst using my creative cloud account. After you open today to make final changes, I see everyone with the exception of a single element with scrollbars attached effects were completely missing in preview mode. After having published the site again to the location of the test are lack there as well and I cannot work out why it happened. Very frustrating as I had just reach a point where I was happy with the content. I even restored a backup version from two weeks ago, when the site was work and site the same items were missing when they appear just as usual in design mode.

  Any thoughts anyone has would be greatly appreciated.

  Thank you very much

  Steve

  Sorry people, should have tried really this first - it took a reinstall of the Muse to solve the problem.

• The two eBay photo uploaders, suddenly, stopped working in FireFox.

  When I click on the link, nothing happens. I have no recent changes to modules, extensions, etc. I have to go back to IE to transfer your photos.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then "Claire recent history...". ».

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Acrobat Distiller has stopped working (not matter of 30 days)

  I've been running CS6 on my Windows 7, 64-bit machine since at least October. I had the problem of 30 days at the 30-day mark, but it is resolved, and it has worked perfectly for months after that. Now, I get an error message that says that acrobat Distiller has stopped working. My only option is to close this window. Acrobat continues to work to read, edit and save one already created a PDF file. Here is where I encounter errors.
  
  I can create a new PDF in Acrobat.  If I click on "Create a PDF file" then choose a Word Doc, it gives me at least twice the error message Acrobat Distiller has stopped working. If I continue to close this message, possibly the pdf has been created and will be in the Acrobat window and the file will be saved.
  
  I can't print to PDF format at all. When I try to Acrobat, I see a little window that says it is control of fonts, then the Distiller has stopped working error message. When I try to print to PDF from other programs (Word, try Firefox), fails.  It could be a document of a page with text, or something with pictures - no go.  I just tested this new - now Acrobat does not.  I cannot put an end to the process of Acrobat - tried to close the window and complete the process, tried reviews ending Acrobat of in the Task Manager, tried to put an end to acrobat and acrotray processes - several times in Task Manager and Acrobat does not close.
  
  I don't know how to solve this problem. I checked to make sure that acrobat has been updated; I updated my Windows; I reinstalled Acrobat.  Nothing suits him.
  
  Apparently, when I run Acrobat Distiller, it freezes in the middle of the audit of the policies.   Here is the text of the error message problem details section I get:
  

  Problem event name: InPageError

  Error state code: c000009c

  Type of media loopholes: 00000003

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
  
  Any advice?
  ROXY

  I suggest that you start by opening Acrobat and performer help > repair. Once the repair is complete, select help > updates and do it on your Acrobat. I hope that these two steps will correct the problems.

• Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Not compatible with the system after XP. Upgrade.

• I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working.

  I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working. Error message says. "licensing for this product no longer works."  Inside the box he is also says, "you can no longer use this program at this time.  You must fix to uninstall and reinstall the program or call technical support. However, whenever I install it I get a message that is INSTALLED successfully.  Can anyone help me, please.

  Thanks John.  I did all this and still nothing worked. I finally got help from a stranger (not in the USA) tech of cat. I guess she got hold of me and sent me a link to download this file. Eureka! It worked...  Posting it here in case anyone else has this problem. She told me that there is NO SUPPORT for Pro 9 except the forums. I'm happy you're here. Keep up the good work.  Here is the page to download the file.

  Download Adobe Acrobat products. 9, 8

  Here is the file that I used that worked for Pro 9 on Windows. Oops, it won't let me attach the file. If anyone knows how I can do make me know.

  Thanks again.

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.

• Spectrum HP convertible x 360: right-click (for the context menu) has suddenly stopped working.

  In my brand new laptop right-click suddenly stopped working (for the context menu or any other use), while I was working with Excel 2010. I checked with Word 2010 and then also with Open Office: there is no right click works with any of them, whether Microsoft or not. I spent more than 5 hours looking for a solution, I did a repair of MS Office 2010, I looked for answers in cats - but nothing seems to work. I guess it has something to do with the touchpad - but what? Thank you for any suspicion.

  Hey @jopg,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a right-click on your convertible of spectrum x 360. I can help you with that, but I'll need to know the model number above all. Once I know that I will be better able to help you.

• I get a window pop up this saying that internet Explorer has suddenly stop working. then it says microsoft is looking for answers. then he said: the program needs to close?

  I get a pop that says "internet exployer has suddenly stop working, and that microsoft is looking for a solution", and then he come back with another pop up saying "the program I've been in must stop"?

  First, run a full scan with the AV (anti-virus) program you have.
  Make sure that the computer is not infected.

  Then some tutorials for you to try:

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211

• Built in laptop keyboard suddenly stopped working the Dell Studio 15

  Dell studio 15 laptop
  Vista Home premium 64-bit
  Keyboard suddenly stopped working, using the screen keyboard now.  All buttons unresponsive.  No virus or malware found by updated AVG scan.  The touch pad or external mouse, both work.  I have no external keyboard.  System Restore does not work.  The driver is up to date and its status is "work prperly.
  Help, please.

  Is it still under warranty, if so contact Dell

• My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

  I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

  It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

  Hello

  1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-ID/default.htm

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.