The IP Phone Firmware update

Similar Questions

• PC now does not see files on the rocket after firmware update

  Until I updated the firmware to v01.02.31P, whenever I plugged my rocket to my PC (Windows XP), it was considered to be a separate drive (e.g., F in Windows Explorer - "Devices with removable storage" and I had no problem using drag & drop, delete files, etc. and download podcasts on Web sites.) Since I've updated the firmware, every time that the rocket is connected to the PC it is now considered rather camera phone in Explorer Windows in 'My Computer' with internal and external memory card uSD

  However, all my existing music files are not 'seen' - for example i.e. the files are now shown as empty, even if the 'properties' of the internal memory shows significant used space and Windows Explorer can't see the files I put on the "rocket".

  Anyone can help getting Windows to 'see' my music files, or is it possible to roll back the firmware.

  Thank you

  The firmware update reset the USB MTP mode or detection automatic (it was before MSC mode). Files transferred in a mode are 'invisible' to your computer when it is connected to the other mode, as you have discovered.

  Just go to settings > USB Mode and she return to MSC if you prefer the way things were before.

• Filling of the memory-how firmware update to get rid?

  Hello! I have 2 GB Sansa clip. Before the update, I had 12 albums and 2 language lessons with room for more information. I installed the update and it took all the memory. I know only have 5 1/2 albums and its maxed out. How can I empty this update and return to the original setting? I much prefer to have the room as this update. Thanks in advance for your help.

  When you updated the USB mode recover.  Re-set-the mode you were using before, under settings, the USB Mode.

  Not sure what filled the storage.  What you could do is to transfer your music to your computer; reformat under settings of the item; and then transfer your music from back.  That should resolve the issues.

  To return to a previous firmware, re - apply just that package - see the sticky thread at the top of the forum firmware.  And here's a repository for earlier firmwares: http://www.anythingbutipod.com/forum/showthread.php?t=22669.

• The WAG200G (EN) firmware update

  Hi all

  I just bought this marked wireless modem/router "manufactured 01/2007", so I think it is wise to update its firmware?

  Now, looking at the "Download" section of Linksys I found 2 versions newer than my WAG (dated 17/12/07 dated 04/04/07 1.01.04 and 1.01.06), then:

  -How do I know what version of the firmware of my WAG is currently equipped with?

  -Should I upgrade versions one after the other, or can I put it directly with the most recent version (1.01.06)?

  The available Linksys download updates are coming as zipped ".img" files: how to treat?

  Thanks in advance for your answers,

  See you soon

  Hi, go to your admin. modem...

  (a) open Firefox or IE

  (b) type 192.168.1.1

  type c) in your router username and password

  default user is "admin" password is "admin".

  (d) glance at the upper right side of the screen, there is a small description that says "firmware version".

  You can see what version of firmware you are on.

  If you want to update, download the latest firmware in a zip file. Unzip the file to your desktop.

  Assuming that you are still connected, go to Administration > Firmware Upgrade >

  You will come to a screen where they ask you to order the location of the new firmware.

  Browse until you reach the firmware (its an img file that you have unpacked above).

  Select upgrade

  my humble opinion... just use for your new WAG200G for now and check if the current firmware update is really necessary.

  his his works well, the authorization would be.

  Thank you

• The Officejet 8500 firmware update

  I'm trying to update the firmware on my Officejet 8500 A909g.

  I downloaded the firmware but the Firmware HP Downloader can't find my printer. I tried two different computers with the same results and I also tried the search on the Downloader button.

  Windows Vista 32 bit

  No error message displayed

  No changes to the system or printer. Automatic fax receiving feature does not work. I hope to update the firmware will fix it. Everything works on the printer otherwise.

  I finally got the firmware updated, but I needed to update the software and drivers on my laptop most recent first. Then I tried to update the firmware and it worked fine.

• Where do you find the Toshiba Vestel firmware update?

  Where do you find the (vestel) toshiba updates firmware of?

  They used to be the site of tech with the manuals, but they're all gone

  Hello

  Here you will find the Toshiba Entertainment Support page:
  http://www.home-entertainment.Toshiba.co.UK/support/

  and here you can download the Firmware for Blueray players and combo LCD TVs
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

• The 2.0 firmware update

  After recently trying to update the firmware on my NEX-FS700 2.0 that I discovered that the updater works on a Mac that is running a 32-bit OSX. Thus, anyone with Mountain Lion wanting to update will receive an error message saying that the update will not work on a 64-bit kernel.

  Are Sony planning when we release an update that will run on a 64-bit Mac OS?

  Are there other ways to update the firmware, via an SD card in the camera?

  Thank you.

  It is available via Sony Asia Pacific website.

  http://Pro.Sony-Asia.com/support/product/NEX-fs700

• The PRS - T1 firmware update does not complete

  EReader PRS - T1. Now that Sony's Reader store is closed, a new firware update redirects the reader to the Kobo store. Trying to do this update on the drive to fail with the "complete failure" message, tried again, not go. Tried on two different Windows 7 laptop computers and two different readers of PRS - T1. Both the same result. Where from here?

  I solved this problem, it's the latest firmware for the Sony Store closing.

  Sony did a bad job of coding, it does not check the space available on the drive. As the update needs to copy the updated firmware for the drive, the drive must exceed 100 meg free space to enable this. Two of my readers had less space to 100 meg. By removing some books in order to release the update about 110 meg proceeded until the end.

  Sony, get your coders education!

• The EqualLogic PS6100 firmware update

  Hello

  We have EqualLogic 6100 with SAS drives and want to update the firmware of 5.2.2 to version 6.0.5. It is a simple process?

  Thank you

  Yes, you can go directly from 5.2.2 6.0.5.  It is in the document "Update Firmware for Dell EqualLogic" on the firmware download page.

  You should also take a look at the "SCSI initiator and operating system Considerations", to make sure that your settings of server (s) always match the requirements for this firmware.

  -joe

• Autonomous phone firmware update

  I need to be able to upgrade/downgrade my firmware of the phone, without any CUCM.  I have installed DHCP option 150, and a tftp server.  If I just place the contents of the zip file of the Cisco firmware in my tftp directory, that should be all I need right? He'll just ask the termxx.default.loads and upgrade/downgrade if necessary?  Just to make sure I don't need an xml file.

  Thank you

  The file cnf or cnf.xml is the one that tells the phone what FW to get, so you the configuration files.

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• The S6000 Lenovo Firmware update

  Hello

  A few days ago, I got an OTA update for my German S6000. His ab on 120 MB. Anyone know what /Bugfixes features are included?

  It could be a coincidence, but given that this update, I have a few forced closes the accuweather APP - that works fine before.

  Thank you
  Selter

  Same problem here. Don't know a fix, I uninstalled AccuWeather, and use 1weather instead.

• The WVC200 camera firmware update failed. Who can help me?

  I have a camera WVC200. Recently, I made the form of R1.1 for R1.2 firmware upgrade,

  then I found some elements of setting could not be saved and could not view certain pages of setting.

  for example:

  1. If you change your network type 'ad hoc' to the 'infrastructure' shape and press on apply buttom, after page web flash, show always "ad hoc".

  2. If you press the button "change security", it shows an abnormal page (no content in this page).

  I would so reflash the firmware, but no answer to the button 'start upgrade '.

  Anysuggestion would be highly appreciated.

  Thank you.

  Clean your IE cache and return in your camera again.

• The WRT54GS V5 Firmware update

  So I pulled out my router outta storage after use it not for a long time and I was wondering where I can get a firmware upgrade for the router so his abreast of the latest news. Its a WRT54GS v5 Wireless router. I have searched all over the site Linkysys and can't seem to find the requested file.

  If there are no software listed on the linksys site then it is supported no longer. Too old. maybe try a 3rd guys party like dd - wrt or tomato.

• The WRT610N-EU firmware update

  My new WRT610N-EU has firmware 1.00.00 B18 August 16, 2008. I tried without success to date with the latest

  21/01/2009 Ver.1.00.02.10, who proves to be an American version. When you provide a version of the EU?

  The firmware that you have already upgraded on your router, his heart for all regions. For the EU or the USA for all regions, is the latest firmware of the router.