the iPod device is displayed as camera

Similar Questions

• Windows does not recognize the iPod device

  installs of XP | Files, folders & storage>

  Windows 7 Pro.

  My iPod Touch will contact the iTunes computer software, but the computer won't recognize as a device, so pictures and videos cannot be transferred back through Explorer or software with call Explorer.

  A Google search seems to suggest that many face the same problem, but none of the proposed fixes work.  Device Manager or Explorer does not show the iPod.

  Oddly, this function worked at one point and there are several pictures and videos to the iPod, but now they cannot be removed or add others.

  I think that it is essentially a problem of iPod, but I hope that help Windows will help me solve the problem.

  I will move this thread to the neighborhood where you posted for the region of Windows 7, but if the following does not help, you should probably ask your question in Apple's iTunes for--> https://discussions.apple.com/community/itunes/itunes_for_windows in the Windows XP forum

  It seems to me that if the driver for the iPod is not installed or is corrupted.  It may seem like overkill, but I suggest to remove completely all Apple software and then put it back.  This should not affect your iTunes library (music, etc.), but it is always prudent to make a backup before doing anything like that.

  Follow directions here--> https://support.apple.com/en-us/HT204275

• The ipod device cannot start (Code 10) how can I fix this problem

  I CONNECT the IPOD VIA THE port USB PORT WONT SOFTWARE INSTALLED on THE PORTABLE JUST FLASHING RED CIRCLE

  Your best help is most likely on www.apple.com for a support.  You have installed iTunes before trying to connect to the iPod?

  Please note that typing in all capitals is difficult to read and is seen on the internet as scream.

• Ok. so, when I sync my music to the ipod, it can read my computer to play, but it is not recognized as the device when I unplug it from the computer.

  my ipod plays only a few original downloads on my sound surround of boise, but the most recent downloads will only record and play on my computer. When I download music it synchronizes and can be found and played back on the computer but is not found on the actual screen of the ipod to play my biose surround sound, but there is space on the ipod.

  If you wait for the new songs (in your iTunes library) to automatically synchronize to the iPod, it must be configured to use automatic synchronization (setting synchronization music ).  Select iPod in iTunes by clicking on its button on the device.  For current iTunes, the screenshot below shows top left corner my iTunes, iPod touch window circled in red.

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check mark for Sync music box (if it isn't already)

  NOTE: No matter what songs on iPod that are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits on the iPod) or a part of the selection .  Implement this screen as you want, and then click apply.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  If this isn't your problem, please post back with additional details.

• Vista Windows only recognizes the ipod touch as a camera

  How can I get windows vista Explorer and widows to recognize the ipod touch as an MP3 player and not a camera? I went to Device Manager, the drivers updated without success. When I plug in the ipod, I always get a window that opens offering manage the device like a camera.

  Hello

  1. If it works well before?
  2. Remember to make changes?

  You can follow the steps mentioned in the link of the Apple below

  iPhone, iPad, iPod touch: Disabling digital camera notification in Windows Vista and Windows 7
  http://support.Apple.com/kb/TS1500

  You can post your query on the Apple discussion forum or contact the Apple support for known issues
  http://www.Apple.com/support/iPodTouch/

• BlackBerry Smartphones to Blackberry Manager devices to display the USB PINS

  My Blackberry Bold 9000 is not recognized by my office blackberry Device Manager.  After hours of playing around to try to solve this problem, here is what information I can provide.

  My desktop and laptop running Vista 64-bit.  I had no problem installing the Desktop Manager on my laptop and cable, updated processes, etc. all work fine.  In my view, this allows me to isolate the desktop and not the device or the cable. The Desktop Manager software is to date on both systems.

  When I try to get the Blackberry device manager to recognize my camera on my desk, in the table options of connection under connection, that COM1 is displayed, Disable stateful shown.  USB-Blackberry 9000 (Paperback) appears on the laptop.  I've hunted around these tips and google for a solution to this problem, but I have not yet found one.  Under the Windows Device Manager, "Blackberry Smartphone" is listed under USB controllers when the unit is plugged, and the drivers are updated according to the instructions on these cards.

  The functions of USB ports for the operation of the keyboard, mouse, and external storage.  I tried to connect to all six USB ports in the back and two on the front of my office, without result.  When the device is connected to my desktop computer, Windows recognises the Smartphone and SD card separately as mass storage devices - with the phone powered on or off mass storage device option.

  I have a feeling that this would be resolved if I could get the Blackberry device manager to display a USB instead of COM1 port.  Someone at - it solutions?

  Hey this is my solution... it worked perfectly for me, and oddly enough, this is a difficulty for VMWare (also the difficulty to detect USB devices)

  Try to right click on one of the USB hubs (in Device Manager) and looking at the details of the driver. If usbfilter.sys is in the list then open your registry editor and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.

  I restarted after making this change, and it works fine now.  Its the first time in the month that I could plug my Curve 8900 using my USB on my PC 64-bit of Windows Vista (now Windows 7).

  KUDO to the population of VMWare for this solution.  Thank God, she also fixed for my BB Desktop Manager! WOOT WOOT!

  Here is a link where I found this solution

  http://BX.BusinessWeek.com/consumer-arbitration/view?URL=http%3A%2f%2Fcommunities.VMware.com%2Fmessa...

  Merry Christmas everyone

• IPod 160 GB abruptly stopped, the search results display when connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod.

  IPod 160 GB suddenly stopped, view the results of a search when it is connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod. Simply, it displays "no record found".

  Click the magnifying glass in the search box and make sure the entire library search is not checked.

  TT2

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. When I save the software, it displays the message.

  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  When I save the software, it displays the message. But I am a member of the local administrators.

  

  When running as an administrator, it shows as below:

  

  It is a client of another domain.   Not our customer of the field.

  Hi Michael,

  Thanks for posting your query on the Microsoft Community.

  As the computer is on the network of field, I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HyperTerminal can not open COM16 while Device Manager displays COM16. Process Explorer can not find COM16 or the other.

  On my laptop in docking station, I used hyperterminal to display incoming data through COM16.

  After departure, using stand-alone laptop computer and reconnect again, COM16 cannot open Hyperterminal again. Not even when the laptop is completely stopped and started again.

  Device Manager displays COM16, but trial Explorer cannot find either.

  Disconnecting and reconnecting the USB-RS232 port are detected by Device Manager.

  How to solve this problem?

  Windows does no accounting of the com ports?

  Concerning

  Hello Michiel,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  Error: "serial number is not valid for this product". Adobe Creative Suite