The ISE - user not found internal user authentication failed

Similar Questions

• Computer keep closing, when restart receives the message: / users/Scott/appdata/local/FL... / Bribfpmco.DLL. Then he said: the module is not found.

  Original title: my computer guard stop

  I have to restart if it has not been used in about an hour or two. When I restart I get this little screen I've ever had before its loading:

  C:/users/Scott/appdata/local/FL... / Bribfpmco.DLL. Then he said: the module is not found.

  Anyone know what it is?

  Thank you

  Scott

  Hi Scott,.

  This problem can occur because of corrupted system files or any what conflict of third-party application.

  Please help me with the following information related to this issue:

  1. What is the brand and model of your computer?
  2. When exactly your computer shutdown? It's trying to access any document in particular?

  I suggest you to check the issue by starting your computer in safe mode. If you experience the issue in safe mode, I suggest you perform the clean boot and check. Follow these steps:

  Step 1: I suggest to start the computer in safe mode and check if the problem is still present. Please see the link below to start the computer in safe mode:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-CA/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2:

  If the problem does not exist in safe mode, I ask you to perform clean mode and then check the status of the issue. A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please answer us on the State of the question to help you further.

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

  I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

  I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

  I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

  "Method 1:

  To resolve this problem in Internet Explorer, follow these steps:

  a. Quit all programs that are running.

  b. Click Start and then click Run.

  c. type regsvr32 urlmon.dll, and then click OK.

  d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

  ('DllRegisterServer in urlmon.dll' received successful)

  If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

  ·         Shdocvw.dll (failed)

  ·         Actxprxy.dll (failed)

  ·         Oleaut32.dll (failed)

  ·         Mshtml.dll (received no response)

  ·         Browseui.dll (failed)

  ·         Shell32.dll (managed)

  Method (step 2):

  I suggest you to start in safe mode and test the question.

  Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method (step 3):

  I suggest you perform a SFC Scan and check if it helps.

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

  (SFC Scan completed successfully)

  Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

  DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

  http://1drv.Ms/11PQ3dm

  I hope this will help you to find me a solution to my problem.

  First of all lets run a startup repair.

  This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

  After return from the logs generated.

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• CC Photoshop crop tool - error: could not complete your request because the file was not found.

  So since the last update to the new user interface, I was not able to reframe my documents (patterns of web page) without getting the error "Could not complete your request because the file is not found" - the file is clearly there and can be saved, and I can restart photoshop and open it again without any problem, but still suffer the problem of harvest tool. Also since I shut down my computer and reopened it and it is not resolved. Any help would be greatly appreciated!

  Happened to me - fixed by re - link the logos files that have been lost.

  A. I wasn't expecting my dynamic objects related

  (B) same as above

  Easy fix, just look for small red icons on some of your layers - then right click > replace content > change 'em out

• TimesTen - 7001: user authentication failed when using XLA

  I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.

  When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error

  javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.

  It is strange that if I switch to user 'oracle', it works fine.

  Can someone please help understand the reason why.

  Thank you

  You created the user 'at risk' within your TimesTen database?

  CREATE a USER risk IDENTIFIED BY 'some password'?

  You granted the privilege of the user risk to use XLA?

  XLA GRANT at risk;

  Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

  The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

  Chris

• Each file shows '?', which means 'the item is not found.

  A new development, I think, otherwise I have not noticed before: each folder, opening, shows a large '?' in the upper left corner. If I click on it, a message appears, saying: "the item is not found. But the items in this folder are already there, clearly accessible, in this same folder!  What is this whole thing? Can I get rid of the grim question mark in the world "?"

  Michael,

  Since you know that the file is associated to the?, you can remove it from the toolbar. Use (command + drag) and pull downwards to remove it. Then navigate to the folder and use (command + drag) and fold it to the toolbar.

  

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• What turned on system indicates the operating system not found

  nothing is happening not as it usually won't do anything this is just to give us the message PXE - E61:MEDIA TEST FAILURE, CHECK CABLE AND PXE - MOF: OUT BROADCOM PXE ROM OPERATING SYSTEM NOT FOUND

  * original title - when I pass my mother in the cell of the Act in this respect is to come with the operating system not found and won't let us do anything *.

  Hello

  / Settings (BIOS/CMOS) often F2 as you start - set the boot to C: drive order
  1. as it is probably trying to boot to a network device.

  If it does not help check with the system manufacturer's support.

  I hope this helps.

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety

• Cannot install KB982331 KB981715 & KB982312 "the expected version of the product is not found on the system.

  I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc.  Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.

  When I try to install the tool in stand-alone via the following links

  KB982331

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en

  KB981715

  http://support.Microsoft.com/kb/981715 and select download package now.

  KB982312

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6deb4fb0-CBFC-40DF-8F62-35fa1db0e167&displaylang=en

  I get an error correctly indicating that "the expected version of the product is not found on the system.  So they will never install successfully but Windows Update won't jump that updates are not necessary.

  Does anyone know how to remove these updates to install?

  Thank you

  Chuck

  Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack.   I chose to ignore the updates and keep the ability to view Office 2007 extensions.

  In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• I get the message that running ' Ckdsk/f' the file is not found. I can't defragment drive c.

  I can't dfragment c drive. I get the message run Ckdsk/f. The file is not found.

  the command is CHKDSK /F.

  However, it is best to run this instead: CHKDSK /R

  It is unclear if you do not run the check disk drive correctly or if the check disk command / file is affected by the volatile file system.

  my suggestion is to acquire a xp boot cd and boot the recovery console.

  then when you get to the disk prompt run the command >: CHKDSK /R

  then type exit, remove the cd and boot into windows.