Impossible to activate the keyboard on my Satellite Pro L50B light

Similar Questions

• Impossible to activate the keyboard on the Tungsten E wireless

  I have a Tungsten E & a 3169WWZ wireless keyboard. I installed the drivers on my device, but when I go to activate & use the keyboard, I receive an error message that says: "util.c, line: 1023, no library series. Can I do to solve this problem? If it has to do with the record, I am currently unable to save... I am told that the serial number is not valid, despite looking right at it and even to change some of the numbers/letters to try other options...

  Any help is greatly appreciated on both issues.

  Tried, and it didn't work. I finally tried a hard reset, removing all PC keyboard drivers & synchronized after the hard reset. He deleted the driver for the Pocket PC, which I couldn't do before. I have also re-uploaded the correct driver, re-installed and things are now working properly.

• Impossible to activate the Bluetooth on my Satellite A200 - 14 d

  I try to activate the Bluetooth in my laptop but I can't. I click on ConfigTree-> Bluetooth-> POWER ON, but it never lights... WHY?

  Hello

  1. check if BT is available on your laptop (label of BT in the lower corner should be available). If Yes, follow:
  2. turn the WLAN switch ON position.
  3 when the WLAN led is activated the key combination FN + F8 and option ACTIVATE BT.

  After that make of this new material will be recognized and installed. Check it please document posted by deepblue.

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• Where to find the keyboard for my Satellite Pro U300 13F?

  I accidentally distroyed my keyboard with wine?

  Who can give me a hint where to buy a replacement keyboard or a secondary market?
  The type of my laptop is: U300 13F p/n PSU31E-00X012DU

  Your advice, please, keesl

  I always ordered the keyboards on eBay.
  Check if you can find one for your laptop model.

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• How to remove the keyboard on my Satellite Pro C850 - 14 c

  Hey, quick question.

  How can I remove the keyboard of the laptop inside to give a cleaning?

  Thank you.

  Hello

  I read that it is not very easy
  You will need to remove the CD/DVD drive first.
  Then, you will need to use a plastic stick to push the back of the keyboard of the ODD housing slot. The keyboard should be pushed until it lifts the corner on the upper surface of the case.
  Then using the same slice of plastic lever to insert between the keyboard and top box, then gently lift the edges of the keyboard until all locks are unlocked.

  By the way: this would be the warranty

• Impossible to activate the Bluetooth on my Satellite C660

  I have a Satellite C660-PSC1GA01E01M. Datasheet says now that this thing has BT built in already. I tried my best to install drivers for the module, but Device Manager me repeating...

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  OS: Windows 7 X 64 Ultimate SP1

  Any help will be appreciated...

  Hello

  Try it please remove preinstalled Toshiba Bluetooth stack and restart your laptop.
  After this visit Toshiba BT portal on http://aps2.toshiba-tro.de/bluetooth/ and download and install the last pile of BT.

  Please send comments.

• [P50] Impossible to activate the Hyper-V (Windows 10 Pro) feature

  Hi all

  I'm having difficulties about enabling Hyper-V on my P50.

  I activated the setting of virtualization in the BIOS P50. I also disabled the P50, wait a minute and then turned back on. Whenever I enabled the Hyper-V feature, when Windows Update required restarting indicates failure update and perform a restore.

  My P50 system info is as below:

  Host name: P50
  Name of the operating system: Microsoft Windows 10 Pro
  OS version: 10.0.10586 n/a build 10586
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Product ID: 00330-80106-07335-AA055
  Manufacturer: LENOVO
  System model: 20ENCTO1WW
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 94 Stepping 3 GenuineIntel ~ 2492 Mhz
  BIOS version: LENOVO N1EET41W (1.15), 31/12/2015
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume1
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Total physical memory: 65 402 MB
  Available physical memory: 60 918 MB
  Virtual memory: Max size: 75 130 MB
  Virtual memory: available: 70 661 MB
  Virtual memory: in use: 4 469 MB
  The page file locations: E:\pagefile.sys
  Logon server: \\MicrosoftAccount
  Corrections: 6 fixes installed.
  [01]: KB3116278
  [02]: KB3120677
  [03]: KB3140743
  [04]: KB3149135
  [05]: KB3167685
  [06]: KB3163018
  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
  Virtualization enabled in Firmware: Yes
  Second floor address translation: Yes
  Data Execution Prevention available: Yes

  The reason why I have 64 GB of RAM on P50 is to have several virtual machines. Help, please.

  Kind regards

  Arief

  Fixed everything at the time of race 'auto BCDEDIT/set {current} hypervisorlaunchtype', run EasyBCD tool and did a re-recreate/startup repair files. Don't enable Hyper-V feature no longer cancellation after reaching 95% percentage of update.

  Thank you, all.

• Latest version of BIOS of the need for my Satellite Pro L670 - 1 L 0

  Hello

  I have a problem with the keyboard on my satellite pro L670 - 1 L 0.

  where can I find the latest version of the bios/firmware of this laptop?

  THX.

  A.

  Hello

  Latest version of the BIOS of your computer, you can find on the Toshiba support page - http://www.toshiba.eu/innovation/download_bios.jsp

  By the way: what kind of issues you have with the keyboard?

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• You have to restart the computer to activate the keyboard.

  Original title: keyboard problems

  I have to start my computer and then restart it to activate the keyboard. my keyboard is plugged. It has benn going on for 2-3 months. I disconnected and then reconnected everthing.

  Hi David,

  1. what type of keyboard you use? What is a PS2 or USB?

  Step 1:

  You can try to use the keyboard on another computer and check if the problem occurs. You can also use a different keyboard on your computer and check for the issue.

  Step 2:

  If you are using a usb keyboard, you can try to reinstall the usb controllers and check for the issue.

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc in start search, and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• I have to restart my computer every morning to activate the keyboard and mouse sometimes.

  I have to restart my computer every morning to activate the keyboard and the mouse

  Hello

  1. What do you mean exactly by activating the keyboard and sometimes the mouse?

  2 are you using the keyboard or mouse wired and wireless?

  3 since when are you facing this problem?

  4 you made any recent changes?

   

  I suggest you to give us more information about the issue so that we can help you better.

   

  It will be useful.

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.