The lack of Windows Vista Security Center.

Similar Questions

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Vista Security Center reports that I have no firewall protection or malicious software.

  Everything on my system was adequate and functional on 16/10/2010 with the Security Center notification that I was using Kaspersky 2010 with firewall protection and malware on the value.

  On 17/10/2010 update downloaded and installed windows 17 updated successfully. The system has been shut down, but restarting the system, the following Security Center said security problems that no firewall was there was no malware protection.

  After checking Kaspersky it said that all facilities are on and working.

  The Security Center also identifies a program Avanquest fix it is obsolete and did not provide security with a solution center to question. This piece of software has not served more than a year, and while it is still in the system, it is inactive.

  Anyone else has a problem with the last set of updates Vista?

  geoffreystone2

  Updates that took place after the restore point have been removed, if these programs need to be updated again (it is the restoration of the operating system - in fact, that's why it works).  It works simply on the updates of Windows, but on the updates or installations of any kind (except changes to the data).  This is not a problem and should completely (and was mentioned in my post above).  Reinstall the updates and you'll be fine here.

  System Restore may take a long time.  L ' turn off in the Middle can cause problems - problems, different problems and even serious problems.  If updates are still there (and you encounter other problems which essentially the same that you started with most of the time), then the system restore did not work or was not correctly filled (but it make some changes if some of your edits are no longer working at least partially and perhaps even completely) (, but just was not given enough time).  I suggest you try again and this time give him more time to finish - say a few hours at least, or maybe more, given the current circumstances.  To do this before you perform any relocation above because they will be lost again.

  I don't understand the issue of e-mail messages.  What do you mean by 'coded '?  What email program are you using?  I suspect that this may be the result of turning off the system before restoring it finished (or the problem with the system restore if it worked actually).  A successful restoration will solve I hope that whatever it is as well - but if we cannot get this to work, we need to abandon this effort at least for the moment.

  If this does not work, then I suggest you follow the advice of Malke (assuming that you have not already) and explain your efforts with the restoration of the system and the results that occurred as well so that they fully understand the situation.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code 80070490 error when you install the Svpac2, KB977165 Windows Vista security update

  Download ok, but then install fails when installing bar happens to sbout 75%. 7 other downloads have managed in the same download package. Tried to install this update only 3 or 4 times with the same result... IN CASE OF FAILURE.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failures of Windows Vista Security KB970710, KB982665 and KB9552709

  If the updates of Windows Vista Security above could not install, should I worry about this, I need to find a way to correct the failures and then installed correctly, please advise. Thank you

  Yes, you need to solve the problem and install them in particular because they are updated for security.

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  Disable your security software.  Then try the updates again. Once this is done (if it worked) don't forget to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 2-24 while installing the Windows Vista Security Update KB2494113

  Original title: Windows Vista security KB2494113 update

  Have tried several times to install Windows Vista Security Update KB2494113.  I get an error code 2 24.

  Hello

  Please follow the steps below.

  Method 1:

  Step 1:

  Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.

  Click on the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)

  Step 2: Manually install the update starting from Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Click on the link below.

  Microsoft Download Center

  http://www.Microsoft.com/download/en/default.aspx

  Method 2:

  Follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Back up the registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

• How to stop Vista Security Center 2011 to block access to the internet

  My sons laptop has been mess up since yesterday afternoon. There McAffee Antivirus, who has never been a problem, however, "Security Center Vista 2011' at random is appeared for the first time, automatically scanned the computer and reported 25 viruses. For this reason, whenever it opens Internet Explorer to surf the net, a pop-up appears telling him that he is infected. If it it closes its doors, the internet charge only to be saying the same thing again, and if you choose to continue to sail on the same message appears, telling him that he is infected. If we go on the Vista Security Center to try to adjust the settings, it leaves us not as customization options are 'greyed out '. He asks us to buy a full version which we don't want.

  We had McAffee scan for these viruses, and it reported a Trojan horse which he deleted. I then rebooted the laptop and the computer starts downloading Vista SP1. It took about an hour to install it. I was hoping that the errors were corrected, however it is still preventing us access to Web sites, saying each site Web is "infected." Several windows pop up appears regularly telling us that the computer is infected and asked to purchase a full version of Vista Security Center 2011.

  Please help, as we have tried a lot of things, and we cannot remove this security program.

  -Simon

  Hi there, Ok vista security center 2011 is a virus. You need a better program Antimalware too to roll all this crapy virus!, I wrote this a month ago. You need too download malwarebyets you can find it here on this link http://www.malwarebytes.org/, download the free version, then you will see a desktop icon of this anti-malware program. You need also side click on it and run as administrator, then it will start up. Now DO a FULL system SCAN, not a quick analysis. It should take about 40mins or so. Now, you will see at least 4 bad Trojan and a virus. Now delete 'em, then after restart PC... Do the same thing again. After the scan is complete, and no virus found... System Restore to a point over 5 days. When we know that when the computer was working no probs then you done everything;), Post back on here to see how you are thereby. Thanks Dion.

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• any part of the microsoft security essenitals program still works from 07/2013 in the version of windows vista?

  I know that microsoft can't anti part of the virus in the version of windows vista.

  According to EPC is always available for Vista

  http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-all-versions

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows Vista Media Center crashes when I change the channel

  Original title: Windows Vista Media Center

  Since the beginning of June whenever I try to change the channel on the TV tuner in Media Center it crashes. I tried to do a system restore but restore never worked on my count. Problem event name: APPCRASH. Application name: EHShell.exe I'm looking for suggestions that might solve this problem.

  1] updated TV Tuner card driver. Visit the manufacturer's Web site and download and install the latest driver.

  [2] delete the file mediaCenterDataStore.db. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  
  Delete: -.

  Start > run > type in %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db > OK.

  Locate mediaCenterDataStore.db and right-click on it, select Delete.

  Restart the Media Center.

  S.Sengupta Media Center MVP

• The HP Windows Vista Media Center m8000n graphics card upgrade

  Hello everyone

  I have a HP Windows Vista Media Center m8000n and 6 GB of RAM

  I want to know if I could update my graphics card and I keep waching TV via my computer.  I became in a gamer and I want to upgrade my computer. If it exists, which is the best graphic card?

  Also, I would like to know if I need to change the computer power supply.

  Thank you in advance.

  P.S. I need an answer as soon as possible

  [Personal information]

  If your TV card's on the 3rd slot (PCI) then your ok to let this map overlap empty PCIEx1 slot. The TV card can stay.

  I made my initial comment based on my computer, which has the same motherboard (although ver2).

  My TV card is in the slot (PCIEx1), #2 and I can not install the card for your purchase.

• Error: failed to create or save new files in the folder where it was downloaded during the upgrade from Windows Vista to Windows 7

  Original title:

  Attempt to upgrade Windows Vista to Windows 7

  I try to update my Windows Vista to Windows 7. I bought to download the rom update the Microsoft store and downloaded, but when I try to start the upgrade I have a stateing message that it is impossible to create or save new files in the folder where it was downloaded. I checked the security permissions in the file and made sure that no programs are 'read only', but it won't always go beyond this point!

  Hello
  
  What is the edition of Windows Vista installed on the computer?
  Make sure that you upgrade to the correct version, some versions of Windows cannot be upgraded with the installation disc you are trying to use. For example, you cannot upgrade a 32-bit version of Windows to a 64-bit version, or upgrade a higher edition of Windows like Windows Vista Ultimate Edition, to a lower edition, such as Windows 7 Edition Home Premium. If this is the case, you will need to use the custom during installation option.
  Before you attempt to upgrade, please run the Windows 7 upgrade Advisor:
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
  Also, check if your computer is compatible for Windows 7, using the Compatibility Center:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
  To learn more about the upgrade process, please visit the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  I hope that helps!

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Repeated failure to update Windows Vista Security KB2665364

  Update for Windows Vista security for systems x 64 (KB2665364) failed repeatedly
  (while all my other automatic updates succeeded).
  The error code is 80070490 (Windows Update encountered an unknown error).
  I tried the two system update tool and recommended Microsoft Fixit such downloading.
  but neither resolve the situation.
  I couldn't follow the "clean boot" option (it went over my head very quickly).
  When I bought my laptop, it came with Windows Vista Home Premium (64 bit) preinstalled.
  I have a product identification number, but not DVD. Is there a way to repair Windows without the DVD?
  Or...?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.