the library files behave differently

Similar Questions

• An easy way to re-import massive media after a hard disk crash if the library files are intact?

  Hello

  I'm running 10.2.3 on OS X 10.11.3 FCPX. My external hard drive just crashed, and while I was able to save most everything else (including library files, proxy support, etc.), Miss me about 90% of the media about 2 000 "original" files. Because the library files have been saved, it seems that my projects seem to be intact, including the cuts and changes. Since FCPX knows what files and parts of files were previously imported, import should be easy... except for the fact that there are about 1 800 distributed clips on dozens of camera archives.

  Is there a way to 'massive re-import' office where he knows the clips came, without having to wade through thousands of clips in dozens of archives and manually by clicking on each of them? Because there is also the fact that, due to several archives of the camera used, different are multiple "Clip #1", "Clip #2", etc. that FCP is solved by adding a number at the end (for example, "Clip #1 (fcp1)" and "Clip #1 (fcp2)"). " I'm afraid that if I import everything in disorder (maybe I not initially import a clip, but returned later and get it), I'll have to sift through to find a needle in a haystack and rename the files manually.

  Even if I have to specify the locations of these archives of tens of couple, it would be so much easier than having to go into each of them and click 1 800 files manually... Any suggestions?

  Please and thank you!

  Too bad. I had assumed the import > reimportation of the camera wasn't working, but apparently because I had saved the AVCHD archives on my hard drive via the Finder instead of 'Create the Archives' of in Final Cut, he just didn't see them. Creating new archives of these same AVCHD files (or rather the folders 'PRIVATE' which originally housed them on the SD card) did the trick and I was able to reimport. Alternatively, I could have re-recorded these SD cards PRIVATE folders and it would have identified those as the original 'camera' once again, too and I could have reimported it... but who would be tedious.

• using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  Hi NikClark,

  ·         You try to synchronize the device with windows media player?

  ·         What happens when you try to synchronize?

  ·         You get the error message?

  Follow the steps in the article.

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  For reference:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Resolving sync conflicts: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/resolving-sync-conflicts-frequently-asked-questions

• How to find the library files that are not due to problems of indexing

  I need help to know how to find the library files that are not as a result of indexing problems?

  I use Windows 7

  Thank you

  Charlene

  Try to open the folder that the library uses directly.  For example, if it is your Documents folder, open C:\Users\Charlene\Documents

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Renders TIFF and JPEG from the RAW files appear different as seen in Bridge

  I work with the demo of Photoshop CS6, with cab 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x 6 1090 t., 16 GB RAM, Win7 64 bit, nVidia GTX 460 video w/1 GB RAM, approx. 2.5 TB of free space on several internal physical disks, Canon 50 d, CR2 files. I have a camera profile generated by the profile editor, and the monitor is calibrated with i-to-1 Match.

  I practiced with the new basic Panel controls (2012 process). When I felt that I was getting the hang of them, I started to save JPEG and TIFF files and noticed differences between what appears in the bridge and ACR. I worked on it for a while and searched some other threads in the Forum that seemed to speak of similar results. I have now tried to Image Processor via the bridge, save the Image in ACR and open > save manually in PS CS6. By what route, the TIFF and JPEG are different (lighter in the following examples, but this isn't always the case), while the saved PSD seems to be close, but not identical to the CR2 in Bridge or Photoshop. Here is a screenshot of the bridge thumbnails that show the differences.

  

  I hope that the labels come out legibly. The two images on the second row are respectively of CR2 and PSD. What is really strange to me is that when I re-recorded the PSD file in TIFF format, the same type of difference appears in the TIFF format. (See the _MG_7960_via_PSD.tif above.) I downloaded the CR2, its XMP, TIFF and JPEG on Sendspace (107 MB) file. I did earlier in my experiences and regret that the naming of the files is not as informative as perhaps.

  http://www.sendspace.com/file/t0lhko

  I ran a few other ACR adjusted by images of CR2 Image Processor and saw a variety of differences between rendering files and the FIRST versions. The differences appear to be in the exposure and contrast. Most of them looked a bit darker, unlike the examples above.

  I'll happily give any other information on request. Thank you!

  Information on the system of Photoshop:

  Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3511 MHz

  Built-in memory: 16382 MB

  Free memory: 13415 MB

  Memory available to Photoshop: 14766 MB

  Memory used by Photoshop: 71%

  Tile image size: 132K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer videocard: GeForce GTX 460/PCIe/SSE2

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 1200, right: 1920

  Video card: 1

  Graphics card: NVIDIA GeForce GTX 460

  OpenCL unavailable

  Driver version: 8.17.13.142

  Driver date: 20120515000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1920 x 1200 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GTX 460

  Memory: 1024 MB

  Texture size video Rect: 16384

  Serial number: Trial Version

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\Kieren\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  E:\, 770.4 G, 644.1 free G

  K:\, 931.5 G, 482,3 free G

  L:\, T, 854,4 G free 1.82

  H:\, 1.75 T, 505,2 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2012/01/18-15: 07: 40 66,492997 66.492997

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/02/09-16: 00: 02 4.0.93 66.496052

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 6.0.0.1654 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/01/18-15: 07: 40 66,492997 66.492997

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/01/18-15: 07:40 66,492997 66.492997

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/01/18-15: 07: 40 66,492997 66.492997

  BIBUtils.dll BIBUtils 2012/01/18-15: 07: 40 66,492997 66.492997

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.0.5.19287 2.0.5.19287

  CoolType.dll CoolType 2012/01/18-15: 07: 40 66,492997 66.492997

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0

  LogSession.dll LogSession 2.1.2.1640

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  SMA 3.11x01

  Angular Strokes 13.0

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.1

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Clouds of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  COLLADA 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Embed watermark 4.0

  Entropy 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Extrude 13.0

  FastCore routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 maximum (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Measure Core 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 median (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mezzotint 13.0

  Minimum 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Neon 13.0

  Paper notes 13.0

  NTSC colors 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photocopy 13.0

  Engine 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photo filter package 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Pinch 13.0

  Pixar 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Range 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  ScriptingSupport 13.0

  Shear 13.0

  Asymmetry 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Sumi-e 13.0

  Summons 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  U3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Draft of 13.0

  Vanishing point 13.0

  Variance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Variations of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  WIA support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Wind 13.0

  Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Zig - zag 13.0

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  You have the option to auto tone apply verified? I noticed and reported that a bridge bug is CS5, when your car is verified. It may still be around.

  IF prefs are designed to open jpef/TIFF image in ACR * IF * the files has ACR settings (aka a XMP file), * AND * auto tone has been verified * THEN * auto tone has been applied to the bridge thumbnails even if jpef/tiff did not ACR settings. Thumbnail/preview looks so different when opened in photoshop and others. The thumbnail has the auto tone and the opened file does not.

  -Norman

• Move the library file to new mac, as well as metadata

  If I had to move my library of Photos to another mac, all the metadata (faces, keywords, etc.) will come with it? Not in terms of the timing, but the library of faces real itself, etc. Is it as simple as move the photo library file to the new location or is there an official way to do this?

  Thanks as always!

  Just drag it to the new computer or transfer using a hard drive in Mac OS extended (journaled) format

  LN

• I can't open select Library of Photos photo of 3rd party app. Will receive access the pictures library to open the library file is grayed out

  OS X 10.11.1 pictures 1.2

  When I try to open the photo of the order open menu file of 3rd party apps (for example, an application in edition on my hard drive or on the web) and access my library of Photos, the library is either gray out and inaccessible, or it is not grayed out, but when I select it it does not e access to individual photos, but instead tries to open the entire library. How to select individual photos, modify or download programs on the web?

  You don't ever open the photo library - you use the browser to media at the bottom left of each window of download/tie/open under media ==> photos--> Photos

  LN

• CC do not update the library files

  Maybe I don't get how this works... I'have a cc library to which I added a few jpg files in Photoshop. I used these files in this library Muse. Later I went back to Photoshop, made some changes to these files and saved re. However, the cc library files are not updated. No what is supposed to happen?

  Yes, it is no longer linked to the creation of original Photoshop document. This allows you (or someone else) to access files on another computer or the Internet.

• The URL in the library file (.lbi) have "library /" arbitrarily inserted in them when exporting HTML documents

  I used a library in CS4 and CS5 for years and suddenly he broke. I have a menu of links defined in a library, with simple entries like this:

  < a href = "board.html" > < /a > Commissioners

  When I updated a URL and updated my HTML documents, all URLS have "library /" inserted:

  < a href = "Library/board.html" > < /a > Commissioners

  The library is the directory where I .lbi files, so it's logical, but it's totally false and break my site, of course.

  FWIW, my option of links to update in the preferences is set to the command prompt. I was invited never to have my links broken, what happened out of the blue.

  Any suggestion would be appreciated.

  Houyhnhnm

  It is not arbitrary at all - this is the way of DW to tell you that the links in your library file are poorly made.

  A library item should never have a link that does not begin by "..". /". This means that the links in your library item must be correct from the point of view of the library item (assuming that you have all of the non-bibliotheque files in the library folder, you should never have).

• help me to open the library file

  Hello world
  anyone can tell how can open files in the library like *.pll in TOAD (as follows)
  THX
  
  Published by: Abu amina on May 27, 2011 02:07

  Abu amina wrote:

  In fact, what - what are you actually trying to achieve? You try to read the source code in the library?

  Thank you!
  Yes you are right I'm reading the source code (and I don't have any other format of this library)

  Yep, Oracle Forms is the tool to do it then.

• to the footer in the library file does not change on the site

  I looked for a colleague who uses dreamweaver. I need to change an e-mail address to request information on this site. When I make the change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  You update the library item, then locally update all the pages that contain this element of the library and then download all the modified pages (that work)?

  or are you simply update the library item file and then download this library file (who doesn't)?

• The library files for the data Service Active for the dissemination of the side Server

  Hello
  It is extract from the file of the adfc - config.Xml. I'm trying to implement the dissemination of the side server.
  

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2" xmlns:ads="http://xmlns.oracle.com/adf/activedata/config">
    <ads:adf-activedata-config xmlns = "http://xmlns.oracle.com/adf/activedata/config">
      <transport>streaming</transport>
      <latency-threshold>5000</latency-threshold>
      <keep-alive-interval>10000</keep-alive-interval>
      <max-reconnect-attempt-time>90000</max-reconnect-attempt-time>
      <reconnect-wait-time>8000</reconnect-wait-time>
      
    </ads:adf-activedata-config>
  
  </adfc-config>

  FM where I get the file library for ' ads: adf-activedata-config' element? I couldnot find by Google.
  
  Thank you all
  
  Published by: user78995 on July 7, 2010 06:44

  They are in the library of the ADF Faces DURATION 11 under JDeveloper 11 g by default. If I had to guess, I would say that adf-richclient-api - 11.jar or adf-richclient-impl - 11.jar

  John

• Time interval in the output file is different from the sampling frequency

  Hello

  I'm a load at 1000 Hz. cell sampling I send information to the VI "write to a measurement file. When I opened the .tdms in excel, the time interval between samples is 0,00062 seconds instead of 0.001 seconds. Is it possible to change the time interval seconds a.001?

  Kind regards

  Johan Hendrikse

  It has sampling frequencies different - he has simply not an infinite number of them. I should have been a little more clear as to what I wanted. Have you read the specifications? Sampling frequencies are defined as 50 000 / n where n is an integer between 1 and 31. When you specify a rate, the driver will put it to the nearest that the material support. A little arithmetic shows that 50000/31.00062. How do you rate? Will this work with a DAQ Assistant?

• move the cloud files account different cloud

  Hello

  Inadvertently, I have two different accounts of CC. One account was created when I started using the mobile app 'Ideas' several years ago. I have a hundred drawings stored on the cloud under this code. I also created a profile when I bought a membership CC with Creative Suite (paid in advance for a year - in February). What I would like is to have the folder 1 CC (the one with the designs) available when I am logged in as the user 2. My first impressions are a) cancel the membership on the 2nd account and sign up for the account of the 1st account. It would probably cost me money, but it will extend my subscription of 2 months. (b) find a way to save files CC (in their original format, not only in JPEG format) on my hard drive, so I can sync it with the 2nd account.

  I would appreciate any feedback or advice I can get. BTW, I already tried to go through customer on this subject and they were unable to help.

  Thank you

  Christa

  Since the page creations site active CC to https://assets.adobe.com/assets/mobile Mobile, you can use the Send link to make a public link to the old account with the files of ideas and then use Copy creative cloud to save in the new account.