The link for the last group of fixes for 11.2.0.3.0 64-bit windows

Similar Questions

• Laptop HP 15-r205TU: need WLAN driver for my new HP 15 - r205TU (32 Bit Windows 8)

  Hello

  I just bought a laptop HP 15-r205TU. I installed 8 32-bit Windows. Should which driver I download to activate the WLAN?

  It's so frustrating!

  Next to the 64 bit OS, please click View all, or you can see the results below...

  Type:	Driver - network
  Version:	2012.13.402.2014(19 juin 2014)
  System:	Microsoft Windows 8 (64-bit) | Hide all Microsoft Windows 7 Home Basic (32 bit) Microsoft Windows 7 Home Premium (32 bit) Microsoft Windows 7 Professional (32 bit) Microsoft Windows 7 Home Basic (64-bit) Microsoft Windows 7 Home Premium (64-bit) Microsoft Windows 7 Professional (64 bit) Microsoft Windows 8 (32-bit) Microsoft Windows 8.1 (32 bit) Microsoft Windows 8.1 (64-bit) Microsoft Windows 7 Enterprise (64-bit)

• The Windows 7 for P1007 driver will work on 64-bit Windows 8?

  Can use the printer driver Windows 7 for the Laserjet P1007 on a 64-bit system of Windows 8 - otherwise, when the driver of Windows 8 will be available?

  Hi CherylSan,

  I think some of my previous tests that it will work. Give it a shot and let me know what happens?

  Base driver HP LaserJet Hostbased Plug-and-Play

• Drivers for HP Pavilion DV7 2111tx on 64-bit Windows 8

  After that the things of upgrade (custom installation from 32 to 64 bits) of Windows 8 as the built in media controls did not work properly. So, I visited the drivers HP page and ran the scan... then chose Windows 7 64-bit (not Windows 8 it).

  The list shows drivers that I need to re - install?

  If not, is it possible to install all of them?

  If so, can I install them in any order?

  These are later?

  Thank you!!

  Hi tourns.

  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Some updates for W8, most drivers W7 will work in W8.
  If you've always had Windows 7 installed, you can run the Upgrade Wizard software, it will scan your PC and report on what is currently installed on your PC is compatible with the W8.
  http://goo.GL/z8LVf

  Upgrade to Windows 8 document
  http://goo.GL/CO6uV

  The upgrade to Windows 8 document covers a variety of issues. Please take a look and let me know if it helps.

• printer driver for Epson Workforce 520 compatible with 64-bit Windows 8

  I just bought a Dell all in one 23 computer Windows 8 and I'm having difficulty of printing to my Epson Workforce 520 printer scanner wireless.  I need a compatible with Windows 8 64 bit print driver.

  See the Epson support site for the drivers and software for your printer. There are win 8 pilots it: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=152503&infoType=Downloads&platform=OSF_W_8-64

• HP ProBook 470 G2 portable PC: upgrade Windows 10 for Intel core i7 4510U, BOF 64 - bit Windows 8.1

  
  

  Katja123 wrote:
  

  Thanks Pepe999, I've already updated.

  You're welcome and congratulations!

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• Please provide the last patchsetof moduleAP, AR, FA, GL, INV, IN., OM and LOCALIZAT

  Hello
  
  Please provide the last group number of hotfixes in the module AP, AR, FA, GL, INV, IN., OM and LOCATION to 11.5.10.2 base.
  
  Kind regards.

  Salvation;

  Please use metalink. Metalink login > patches and updates & > check Lastest 11i Packs for module group of patches

  Assessment of the location

  11i EMEA locations - cross-country ski [ID 404120.1] module
  Guide to specific features of each country (globalisations/locations) [ID 403211.1]

  Respect of
  HELIOS

• Last group of patches for oracle 11 g 2 in aix

  Hai,
  What is the last group of patches for oracle 11 g 2 in aix.

  Hello

  You can download 11.2.0.2 patch group.

  Patch number * 10098816 *- family of Oracle database: patch 11.2.0.2.0 PATCH SET for ORACLE DATABASE SERVING group

  This can be downloaded from http://support.oracle.com, need a valid CSI and account number.

  See also technical note Mos:
  * 1189783.1 changes to the Oracle database sets from 11.2.0.2 *.

  http://appsdbaworkshop.blogspot.com/2011/03/Oracle-11gr2-inplace-and-out-of-place.html

  Thank you
  A H E E R X

• The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

  The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

  Event ID: 37
  Source: Kernel-processor-Power
  Task category: 7

  -What it means and how to fix this?

  : S

  Make sure that the system has sufficient cooling, and that you have upgraded the BIOS most recent.

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• I bought the last 13 items for download, but I clicked on the link Windows, I own a Mac, how can I change the Mac platform? The Adobe site suggests what it automatically detect that I won a Mac and a change of the platform is so?

  I bought the last 13 items for download, but I clicked on the link Windows by mistake when I bought it, I own a Mac, how can I change the Mac platform? The Adobe site seems to indicate that it automatically detect that I own a Mac and change the platform, what then? I can't find anything (probably to the search in the wrong place) on Returns or cancel my order. Any suggestion would be great, thanks.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Get help with orders, refunds and exchanges (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-b.html

• SkyDrive links added to all default email on the last document

  Attaching a series of 4 documents to an email in Hotmail via skydrive translates into hyperlinks for each document appearing as a list in the email as well as hyperlinks allowing you to ' go to ' 4 documents or download as a zip file.

  Using the two links this last fine, but all four of the hyperlinks in the list title will take you to the same document, which is always the last document added.

  It's weird and annoying.  Any body know why this happens and how to fix?

  Hello

  Check with the support of SkyDrive and Forums.

  SkyDrive
  http://explore.live.com/SkyDrive

  SkyDrive - Help Center
  http://explore.live.com/SkyDrive-Help-Center?T1=T1

  Windows Live SkyDrive (forums on the right side)
  http://windowslivehelp.com/product.aspx?ProductID=6

  Windows Live Solution Center
  http://windowslivehelp.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• CSS link hover color not applied to the last letter in safari

  I'm only seeing this in safari. Here is my site:

  http://smartpeopletalkfast.co.UK/OO2/

  If I click on the contact page of his highlihgted as it should. However if im not on the contact page and I look over the contact link, and the last bit of 't' is not highlighted. How can I fix?

  IM assuming that because its the last piece italic is outside the div tag and for some reason the color of overview is not shown. Ive tried to apply both a: hover css and li: hover.

  Thank you

  I'm the see in FF 3.6.13 as well as on the PC.

  Validate your page or DW or the W3C. On the one hand, you have the divs inside li tags. Do not split your style... Add the italic style to the main styline for the li tag.

  If fixing coding does not work, try adding that a fill to the right of this container - a couple of pixels should do.