The main class and the class structure of game

Similar Questions

• error message "cannot load the main class.

  I ran windows update yesterday and installed the recommended updates, restarted my laptop today the error message "Unable to load the main class" appears in a box and I couldn't do anything until I had closed this box, after the loading of firefox it displays a message not responding, then a bar indicating that plugin adobe did not start successfully so I clicked to reload page Then, I rebooted my laptop to see if this solves the problem, but the same error message appeared and firefox have responded in the same way, someone has an idea how I can fix this problem?  I run anti-virus software and malware from comodo and my OS is windows vista 32. I also downloaded an update for adobe flash yesterday but the problem has not produced until after I had done the updates of windows.  Thank you

  Hello Fiona,

  Thank you for your response.

  You are facing this problem might because of Java program on your computer.

  I suggest you perform the clean boot and check the status of the issue, which will help you identify the problem.

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section:How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Hope his helps.

• Could not load the manifest attribute of the main class of C:\program files\frostwire\commons - connect

  original title: I need to know what means this message and I can remove it from my computer

  doess someone knows what this message means? Could not load the manifest attribute of the main class of C; \program files\frostwire\commons-logging, pot every time I look at this subject in my file, it appears, I'm not good at all with computers but I know im short-term memory or space on this computer and I tried to go into my programs and delete, can you please help me understand what I can and can not delete to give me more space? Thanks, im running Windows Vista! If you would like more information, I'm sorry, just ask me? Thanks again, I hope someone can help me! :(

  This discussion forum on Microsoft Security Essentials antimalware. You can get help in the Microsoft Vista answers forums - http://answers.microsoft.com/en-us/windows/forum/windows_vista

  Jim

• "Could not find the main class" Java error on Windows 7, but not Windows XP

  Hi all

  It's the first app I try to package and virtualize with ThinApp.

  It is an old business application that usually runs on Windows XP SP3 x 86.

  The. MSI that I generated with Thinapp works very well when it is installed on a Windows XP SP3 x 86.

  However, our main goal to use Thinapp is to install on a Windows 7 SP1 x 64.

  But in doing so, the application triggers a Java Virtual Machine Launcher error message saying: "could not find the main class. Program will exit. »

  I thought that it was because the app includes a 1.4.2 JVM and that my XP has not any JVM pre-installed, but the main image on my W7 has a 1.7 JVM. But even after I uninstalled the 1.7 and installed JVM 1.4.2 on the W7 machine, I kept getting the error message so I guess that it is not bound.

  Y at - it an option that I missed during my MSI generation so that it can run on a Windows 7 x 64?

  Thank you all for your help.

  D.

  With the help of Lachi, we found that the app natively works on W7, no need for ThinApp it if the goal is just to make it work on W7, from a XP world.

  The only change we had to make (and the error was the same ThinApp-ed, which is what I originally shared) is that the application should work with Windows 7 in "classic" mode "of the screen (without Aero and the menu start XP-style). This is because the application runs an old integrated version of Java (1.4) and it makes the system calls seeking specific .dll to display, which are not accessible by default if Aero is enabled.

  Closed topic

• Pass a variable to the main class to a MovieClip

  Hello!

  I have a document with the main class.

  I have also a few clips that have their own class and functions.

  I'm trying to pass a variable in my main class to one of these clips.

  I tried a few things, nothing has worked.

  Who can help?

  Match_Easy looks like a class name.  You must use the name of the instance.

• The main class is not found: HelloWorldSwing

  First lines of the file "HelloWorldSwing.java".

  package start;
  import javax.swing.*;
  public class HelloWorldSwing {

  I've successfully compiled the file.
  When I type the following command

  C:\>java HelloWorldSwing

  I get the following error Message:

  Could not find the main class: HelloWorldSwing.  Program will exit.

  I'm sure that the absolute path of the file is:
  C:\start\HelloWorldSwing.Java
  and I issued the command of
  C:\

  Your class is in a package. Its fully qualified name is start. HelloWorldSwing

  DB

• The main class is not found

  Hi all
  I am facing problem when I try to create the JAR file.
  After creating the Jar file I tried to run but error message
  Main class not found.
  
  I follow these steps
  (1) my WordNetOK.java

  import java.io.File;
  import java.io.FileNotFoundException;
  import java.util.Scanner;
  import edu.smu.tspell.wordnet.*;
  
  
  public class WordNetOK{
  
      public static void main(String args[]) throws FileNotFoundException {
  
  System.setProperty("wordnet.database.dir", "C:\\Program Files (x86)\\WordNet\\2.1\\dict\\");
  WordNetDatabase database = WordNetDatabase.getFileInstance();
        String result = "";
          NounSynset nounSynset;
          NounSynset[] hyponyms;
     
          //creating File instance to reference text file in Java
          File text = new File("C:/javacode/WordNetin.txt");
        
          //Creating Scanner instnace to read File in Java
          Scanner scnr = new Scanner(text);
        
          //Reading each line of file using Scanner class
          int lineNumber = 1;
          while(scnr.hasNextLine()){
              String line = scnr.nextLine();
        Synset[] synsets = database.getSynsets(line);
        for (int i = 0; i < synsets.length; i++) { 
        String[] wordForms = synsets.getWordForms();
  
       for (int j = 0; j < wordForms.length; j++) {
  
  System.out.println(wordForms[j]);
  
       }
  
            }
  
  
  
  //System.out.println("line " + lineNumber + " :" + line);
  
  
  
  lineNumber++;
  
  } 
  
  
  
  } 
  
  
  
  }
  2) Javac WordNetOK.java
  
  it create a class file
  
  3) i create Manifeast.txt 
  Main-Class: WordNetOK
  4) i run this
  C:\Javacode > jar cvfm WordNetOK.jar Manifest.txt WordNetOK.class
  Adding manifests
  adding: WordNetOK.class(in = 743) (out = 435)(deflated 41%)
  5) i tried to execute it as * java -jar WordNetOK.jar *
  
  But error appear could not find main class
  C:\Javacode > java-jar WordNetOK.jar
  Exception in thread "main" java.lang.NoClassDefFoundError: WordNetOK
  Caused by: java.lang.ClassNotFoundException: WordNetOK
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  The main class is not found: WordNetOK. Program ends.
  
  
  C:\Javacode >
  Note : i execute the classpath at beginning
  set PATH = C:\Program Files\Java\jdk1.6.0_32\bin;
  set the classpath = C:\Program Files\Java\jdk1.6.0_32\bin;\javacode.
  
  
  Edited by: Ayham on Apr 6, 2013 7:39 AM
  
  Edited by: Ayham on Apr 6, 2013 7:41 AM
  
  Edited by: Ayham on Apr 6, 2013 7:45 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
  			 
  Why are you creating your own manifest file? Let just for you Java.
  It works for me using 1.6
  C:\Javacode>jar cfe WordNetOK.jar WordNetOK WordNetOK.class
  
  C:\Javacode>java -jar WordNetOK.jar
  Hello World.
  
  Generally, you should leave a tool (e.g., Netbeans, Ant) create the manifest because they know how to do it properly.
  		   

• What is the relationship between the main timeline and timelines of symbol in Adobe Flash Professional CC?

  I am new to Adobe flash and tried to create an E-card for a class. My teacher said that it is better just to have a keyframe for each layer in the main timeline and do all the clips of animation and film on the deadlines of each symbol. I'm having a hard time to understand how it works. To illustrate my confusion, let's start with an example.  I have a kite I want to start flying to frame 20. The kite is a symbol, so I create movement to 20 image interpolation in chronology of the wing. 20 on the symbol Timeline frame occurs at the same time as frame 20 of the MAIN scenario, or are they completely separate instances of time?

  Part of my mission, is should I use code snippets to add an element of interactivity to the Ecard. My confusion about the timeline affects my ability to do so. My teacher said that you need a stop on the first keyframe code to make sure that things will not start before you click the play button. Can I put the stop action on the main timeline or in the timeline of each symbol, or both?  Let's say I want to create a button that makes the kite flies when I click it. Where to play action 'go to and play', in the Assembly of the wing?

  I would greatly appreciate any help from the community. I'm the kind of person who needs to understand how things work. I searched for days, watch videos and read articles, but I still need to find a resource that effectively dissolved my confusion on this subject. So if anyone knows of any tutorials that explain how the main timeline and symbol timelines coincide, please share them with me. Thank you very much for your time.

  (P.S. are CC Animate Adobe and Adobe Flash Professional CC the same?)

  Thank you both for responding. Yes, your answers were useful, but a bit Advanced. I hope that you don't mind me asking a few follow-up questions.

  For Pete47-

  So I put my stop() in the main timeline. How the actionscript in the main timeline code works on the chronology of the wing if the two are separate?  Why not put the ActionScript on chronology of the wing? Clearly, there must be an interaction between the main timeline and symbols, right?  When you say "you can drag the symbol on the main timeline and it will run when you start", what do you mean by that? Like GETTING started, in the main timeline or in the scenario of the symbol? As you can see I am very confused by there!

  For Colin.

  I thought that Pete said you want to only have a keyframe in the main timeline. Then, when you said... "you can do it with an interpolation of the main timeline... from the beginning to the final position," why would you animate the motion on the main timeline? Why not in the chronology of the wing, can create another symbol of the tail in this period?

  And if the schedules of chronology and main symbol are separated, how SYNCHRONIZE you together different symbols to their movement to work together? And why should it be like that anyway?

  I am new to the community here, the last thing I want to say because you two sounds very knowledgeable on the Flash. How did you get your start? Did you start by watching the tutorials, read the manual, or something else?

  Once more, you have my abundant thanks for taking the time to help.

• Control a Subvi VI main using the event Structure

  Hi all

  I'm moving hand Vi VI Sub values...

  However, my Subvi works with a structure of the event. (Change in value).

  So when I run my main VI and I press the highlight (yellow bulb), the sub vi does not run...

  I'm sure... I m missing something very basic.

  My main and the Subvi operate with a structure of the event.

  Please see my attached files.

  Each event structure listend to a button to calculate different: one on the respective fromt Panel. (Even if they have the same label, they are completely separate!)

  Events are mainly for any user, they won't be triggered if a terminal is written by program. If the front panel of the Subvi is closed, you cannot press the top button.

  Can you explain the purpose of your exercise? You seem to confuse you upward in some misunderstandings based on the flow of data and events.

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• Standby Redo logs and the Directory Structure in the Backup Site

  Hi guru

  I just want to confirm, I know that if the directory structure is different, I need to talk about these 2 settings in the file pfile

  on the main site:

  DB_CONVERT_DATAFILE = 'sleep', 'primary '.

  LOG_CONVERT_DATAFILE = 'sleep', 'primary '.

  On the secondary Site:

  DB_CONVERT_DATAFILE = 'primary', 'sleep '.

  LOG_CONVERT_DATAFILE = 'primary', 'sleep '.

  But I want to confirm this weather I have to deliver the full path of the directory in the two paramtere above:

  as:

  DB_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

  LOG_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

  Second Confusion: -.

  After that transfer standby Redo logs creates primary and made to sleep on the foregoing, mentioned the directory structure and after restoring the alongwith primary db backup, that ensures the control file will not affect the journal of physics again placed watch on the above mentioned location.

  Thanks in advance for your help

  vk82 wrote:

  In fact, I create the day before by using the RMAN Duplicate command. but where I am confused is the point if I transfer the backup that i taken the pri on the C:\backup_files path. and after that, I transfer the backups to the waiting on C:\backup_files. After that when I restore it will create datafile and other stuff in another directory I mentioned using DB_FILE_NAME_CONVERT as LOG_FILE_NAME_CONVERT. I think Yes but need your advice during the same period.

  Hello

  Yes, files should be created under the directory mentioned in the path of the parameters 'db_file_name_convert' and 'log_file_name_convert.

  Kind regards
  Shivananda

• What is the file deleted the files in the main folder, and can / should I remove it?

  What is the file deleted the files in the main folder, and can / should I remove it? Is it too much room, I could use?

  This file stores a list of files from previous version of Firefox that are no longer needed or supported in the current version of Firefox. This file is only a few KB and it is best not to delete files in the Firefox program folder to avoid update problems. If the required files are missing or modified with a update Firefox will download the full version (approximately 10 MB) instead of a small incremental update which is usually only a few hundred KB.

• Cross and copy files to the new structure

  Hello people!

  I had a huge task I'd like to simplify with a bit of Applescript.

  Basically, I would like to move or copy a lot of files in a new folder structure.

  I have a few different folders with all 500-4000 jpg, see image below.

  First picture shows the old structure, 2nd picture show the new structure I would accomplish.

  

  I want to do is have a script to loop through and take the first 4 characters of the file name and create a folder with that name in the location of my choice.

  Then, create a new folder in the parent called JPEG folder and copy all of the files with the same name specific to this folder.

  So far, I've been able to automate the creation of folders and subfolders.

  any help is appreciated

  loc to choose a folder "choose the Parent folder location."

  Repeat with I from 1 to 3

  the value d to text - via -1 of 2 ("51" & I as text)

  Try

  tell application "Finder" to set targetFolder to create a new folder in loc with properties {name: "61" & j}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "JPEG"}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "PSD"}

       end try

  end Repeat

  Hello

  You could try the AppleScript script which is a simple bash script wrapper.

  It will allow you to choose the source directories and destination and then analyze the source for jpeg files tree and copy the jpeg file with name starting with excatly 4 digits IJKL to the correspondent-I000/IJKL directory in the destination. In the destination path directories are created as it should. For example, your screenshots, you can choose the folder '7000-8000' or its parent directory in the source directory and the "OBJECTS" folder as the destination directory.

  Any jpeg file which doesn't have a name starting with exactly 4 digits is ignored. Verbose output of the CP (1) and any errors will appear in the result pane / window (Apple Apple) Script Editor.

  --APPLESCRIPT
  set src to (choose folder with prompt "Choose source folder where source tree is rooted at")'s POSIX path
  set dst to (choose folder with prompt "Choose destination folder where destination tree is rooted at")'s POSIX path
  if dst starts with src then error "Source tree may not contain destination." number 8000
  set args to ""
  repeat with a in {src, dst}
      set args to args & a's quoted form & space
  end repeat
  
  do shell script "/bin/bash -s <<'EOF' - " & args & "
  SRC=${1%/}
  DST=${2%/}
  {
  export LC_CTYPE=UTF-8
  while IFS= read -r -d $'\\0' f
  do
      n=${f##*/}
      [[ $n =~ ^(([0-9])[0-9]{3})[^0-9] ]] || continue
      p=${BASH_REMATCH[1]}
      q=${BASH_REMATCH[2]}
     
      jpg=${DST}/-${q}000/${p}/JPEG
      psd=${DST}/-${q}000/${p}/PSD
      [[ -d $jpg ]] || mkdir -p \"$jpg\" || continue
      [[ -d $psd ]] || mkdir -p \"$psd\" || continue
     
      cp -v -pPR \"$f\" \"$jpg\"
  done < <(find \"$SRC\" -type f -iname '*.jpg' -print0)
  } 2>&1
  exit 0
  EOF"
  --END OF APPLESCRIPT
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original directories before running this kind of script.

  Good luck

  H

• Exchange of data between the main VI and sub - VI

  It is my first attempt to build a comprehensive program and hope you can help me.

  The idea is to load a set of data and to perform several calculations and operations on them, find themselves in the creation of a report file.

  What I want to do is to build a main VI which contains the data, and several sub - vi to do the math, dynamically loaded in a subgroup of experts (for the simple user interface). I thought about this architecture because I'm sure I'll have to change the calculation of VI, and I don't know how I'm going to need, so I can just add an another calc VI to the plugin dir and load it. The thing is, I have to keep moving data back from the main VI to the Subvi and maybe even between sub - vi. Is there an easy (or not so hard) how? I thought about queues, but sometimes the data is to be sent to more than a subvi, and I can't have a queue for each. The idea that I get is like a network producer-consumer mode BOX: the main VI produce some data and all those interested in this data use. Then they send the results back (as a "producer") and all stakeholders in the response it consumes.

  Attached, is a "skeleton" of what I intend to do.

  There are several ways you can accomplish this. First of all, you can use the Start Asychronous Call, which will provide a component of connector for you. So, it is easy to wire the reference to it. You could also implement a global functional (also known as a motor of action) to access the event reference. It is the approach we use for our shared events. If you have lines between the main VI and ths Subvi you to format a particular message reference. However, I don't think that this approach would correspond to what you are doing.

• What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

  What is the organizational structure of microsoft and what the different type of organization between microsoft and linux

  Microsoft communities must answer a technical question about Windows 8, Windows 7, Windows Vista and Windows XP.

  If you have a technical question, please let us know. This type of information you are requesting is not available in this forum. Do a search on the internet, and you should be able to find this kind of information.

  Sincerely,

  Marilyn