The manufacturing of cursor tips

Similar Questions

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• operation of equipment covered outside the permitted or intended uses described by the manufacturer

  It is the language in the AppleCare protection plan, letter c, what is NOT covered.  And yet, I can't find information ANYWHERE, "as described by the manufacturer.

  Can someone tell me where the permitted or intended uses described by the manufacturer?

  I found this document - AppleCare Protection Plan for Mac - that applies to the United States.

  http://www.Apple.com/legal/sales-support/AppleCare/appmacnaen.html

  It does not contain a section "letter c".  Then perhaps, it clarifies the issue you mention.

  If this isn't the case, I suggest that contact legal Department of Apple.

  https://www.Apple.com/legal/contact/

• What is the manufacturer of HARD of Tecra S1 PT831E disc

  I'm looking for the manufacturer of the disk HARD of S1 model No. PT831E.

  Thank you!

  I guess that it s a Toshiba HDD ;)
  If you have a 40 GB HARD drive, then the part number could be: MK4019 GAX

• Properties L50-A-138 satellite appears another logo of the manufacturer

  Hi all

  I have a problem with my laptop Satellite L50-A-138 after installing Win 7 ultimate 64 bit
  When I click on properties for the computer, he said that the manufacturer is LG instead of Toshiba.

  Any help to solve this puzzle?

  I read that the display that is built into the laptop was made by LG. This could be the reason for this other brand name label in the properties.

  But have you installed all Toshiba drivers and software for the Win 7 system?
  Very important is the installation of value-added package released for Win 7 64 bit!

  No doubt installation of VAP from Toshiba would change the brand image

• The manufacturer custom driver cannot be updated.

  Hello, my computer is a HP p6642f with windows 7 64-bit OS.  I need to update my graphics card for games, I tried to update my HP graphics card but the version on my computer shipped with is the latest version, as the HP 8.15.10.2119 as dated 20/04/2010.  I do not exactly know what graphics card I have, my dxdiag says;

  System

  Information System

  Current date/time: December-12-26 19:07:40

  Computer name: OWNER-HP

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600)

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: p6642f

  BIOS: 12/07/10 14:03:04 worm: 6.12

  Processor: Intel Core I5 CPU 650 @ 3.20 GHz (4 CPUs), ~3.2GHz

  Memory: RAM 6144MB

  Page file: 6649MB used, 5106 MB of available space

  DirectX version: DirectX 11

  Display

  Device

  Name: Intel(r) HD Graphics

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics (Core I5)

  DAC type: internal

  Memory total approx. : 1760 MB

  Current display mode: 1680 x 1050 (32 bit) (59Hz)

  Monitor: generic PnP monitor

  Drivers

  Driver: igdum64.dll, igd10um64.dll, igdumd >

  Version: 8.15.10.2119

  Date: 20/04/10 21:18:38

  WHQL Logo would be: n/a

  DDI version: 10

  WDDM 1.1 driver model

  What I need to know is what graphics card I have the latest update what are not compatible and how to install the new version, the driver from the manufacturer to measure.  Any help will be greatly appreciated.  I got 2 games for Christmas, DOOM 3 BFG edition and limited edition of Medal of Honor Warfighter.  Will not run and I suspect that my graphics card update can fix these two problems.  When I try to load edition BFG DOOM 3, I get the message:

  'Unable to initialize OpenGl' followed;

  Timing QA INIT: 000124ms
  D3BFG 1.1400 win - x 86 November 9, 2012 10:38:21
  3192 MHz Intel CPU with MMX, SSE and SSE2 and SSE3 & HTT
  5872 MB of memory
  -1284 MB of video memory
  Winsock initialized
  Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 netmask NULL - skipped
  Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
  Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 netmask NULL - skipped
  Sys_InitNetworking: adding loopback interface
  Doom using MMX and SSE SIMD processing
  flush to zero mode
  anomalies-zero mode are enabled
  -Initialization of file system-
  Loaded resource file _Common.resources
  Loaded resource file _Ordered.resources
  Loaded resource file _Sound_pc.resources
  Loaded resource file _Sound_pc_gr.resources
  Reading resource CRC...
  Current search path:
  C:\Program Files (x 86) \Steam\steamapps\common\DOOM 3 Edition/basis of BFG
  C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
  file system is initialized.
  --------------------------------------
  WARNING: Could not open the resource file maps/_startup.resources
  -Initialization Decls-
  ------------------------------
  Failed to open the log files
  execing default.cfg
  could not exec D3BFGConfig.cfg
  couldn't exec autoexec.cfg
  -R_InitOpenGL-
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. whose window class
  .. that fake window class
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 640
  dmPelsHeight: 480
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1680
  dmPelsHeight: 1050
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  Unknown command "vid_restart".
  Cannot initialize OpenGL
  Closure of the OpenGL subsystem
  .. .shutting to the low LHQ

  And when I try to load Warfighter of Medal of Honor Limited Edition I get a window saying:

  'Creation of device DirectX error' followed;

  Could not create D3D device of at least version 10.0 on card 'Intel(r) HD Graphics' chauffeur 'unknown '.  The error is DXGI_ERROR_UNSUPORTED ('East.').

  This is usually casued by not only not the minimum required DirectX support in the GPU.

  For the NVIDIA GPU, DirectX 10.0 support is required.

  For AMD and GPU by other sellers, DirectX 10.1 support is required.

  Okay, for Medal of Honor veteran it says my graphics processor does not support DirectX 10.1, but the fact is that I have direct X 11 which contains everything contains DirectX 10.1.  So I guess DirectX or Medal of Honor Warfighter is looking on behalf of my video card, comparing it to a list of compatible cards, my card has been customized by the manufacturer is not on the list, and if he refuses to try to load DirectX or Medal of Honor Warfighter?  I don't know if there is another way to fix it would be great, but I really want to update my video card.  I heard that the update one driver custom manufacturer can casue instability, but I'm willing to take the risk.  If I can't get a solution to my problem here, I would at least know what is my model of graphics card other than just "Intel(r) HD Graphics (core I5)" so that I can continue the search on my own.

  Here are the specifications of your desktop HP Pavilion p6642f. According to specifications, your computer has integrated Intel HD Graphics using the Intel H57 chipset (when a compatible CPU is installed). There is no driver that will allow you to play these games with the integrated graphic solution effectively very low power that is in your computer. The only way you will get to play these games, is to buy a new game rated PCIe x 16 graphics card and a new PSU rated for the graphics card. Please see 'selection of a discrete video card Dave_G Guide' for more useful information on this subject.

• I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  It's probably a battery issue.   Take it in your local store to apple for review.   It is still under warranty?

  By the way, fill out your profile before asking questions, it is impossible to identify which mobile version otherwise.

• Satellite A300 - Am I still covered under the manufactures warranty?

  Hello

  I just bought a Toshiba Satellite A300 off a private person...
  Am I still covered under the manufactures warranty? It has not been saved before to the other person.

  Each Toshiba laptop is under warranty for one year.
  I recommend also to visit the Toshiba page and save your laptop on site for an extra year of warranty.
  After registering your laptop is under warranty for 2 years.

  You should definitely take this attractive offer!

• Possible bug found in hyperlinkctrl.c when you use the "VAL_POINTING_FINGER_CURSOR" mouse cursor in your own user interface.

  Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.

  I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.

  The error is recoverable error: ' from the mouse cursor is not valid.

  This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).

  This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.

  I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...

  The hyperlink control's source code is located in \toolslib\custctrl\hyperlinkctrl.c

  The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.

  This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.

  However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.

  The mouse is not over a hyperlink
  If (cursor is VAL_POINTING_FINGER_CURSOR)
  {
  Reset the cursor to the previous cached cursor
  cursor = GetTsvCursor();
  errChk (SetMouseCursor (cursor));

  ... etc...

  }

  So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.

  Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?

  :^)

  JB

  In the meantime, I have submitted a bug with ID #545203 report to track down this problem.

  -Johannes

• How to know who and how to contact the manufacturer because of passwords forget bio

  How to know who and how to contact the manufacturer because of passwords forget bio

  Hello

  I suggest you to go through Microsoft's strategy in the following Microsoft article.

  Microsoft's strategy concerning lost or forgotten passwords:
  http://support.Microsoft.com/kb/189126

  For any assistance regarding related BIOS passwords, you must contact your computer manufacturer.

  Hope the information is useful.

• lifeveiw 32-bit video fly application driver is not compatible with xp 64 bit and driver update is not available with the manufacturer

  tell me how to change the compatible driver in my bit of xp professional 64 window.

  Hello

  Device drivers designed for the 64 bit version of Windows do not work on computers running a 32-bit version of Windows.

  You must contact the manufacturer to improve the assistance on the issue. Link: http://www.lifeview.com.tw/html/contact_us/contact_us.htm

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• diagnosis provided by the manufacturer or the installer is what I have to reinstall windows xp, help

  I get this message. Setup did not find any hard drives installed in your cmputer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running.

  The installation program cannot continues.

  Hello

  According to my understanding, your device does not detect the hard disk of the unit there are a few steps that you can try to resolve your problem.

  (1) turn the unit pressing the F10 key Dungeon and then go to the Diagnostics record if the hard drive is detected if so if please run the test and check if this goes. If not you need to reinstall the hard disk and do check it out if you have the same problem, then the hard disk is damaged, you will need to replace the part.

  (2) after that reinstalling the hard disk if the drive is detected and if the test is successful then you can try to reinstall OS again on the device.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I hope I am posting this on the forum,

  I want to delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I went into computer management console & know that the primary partition - drive C system, boot, pagefile, active lists, dump incident & main partition in brackets but I don't know about the virtual memory paging file. No, there is some data on it. I've been saving the other partition - C drive on an external hard drive.

  I know that I have to back up this data but where I should come back to? And why is it called (Primary Partition) when it is used only as a return to the top by car?

  I'm only wanting to do because I'm running out of space on my drive C & D drive are the same size! 143 GB & 139.5 GB

  I have a laptop of Acer 6930

  Window Vista Home Premium Service pack 2

  Intel Core 2 Duo T6400 2 GHz

  4 GB OF RAM DDR

  64-bit operating system

  HARD DRIVE 320 GB

  I hope I am posting this on the forum,

  I want to delete a partition on my hard drive that was originally set up by the manufacturer as a backup drive hard to label.

  I went into computer management console & know that the primary partition - drive C system, boot, pagefile, active lists, dump incident & main partition in brackets but I don't know about the virtual memory paging file. No, there is some data on it. I've been saving the other partition - C drive on an external hard drive.

  I know that I have to back up this data but where I should come back to? And why is it called (Primary Partition) when it is used only as a return to the top by car?

  I'm only wanting to do because I'm running out of space my drive C & D drive are fighting the same size! 143 GB & 139.5 GB

  I have a laptop of Acer 6930

  Window Vista Home Premium Service pack 2

  Intel Core 2 Duo T6400 2 GHz

  4 GB OF RAM DDR

  64-bit operating system

  HARD DRIVE 320 GB

  Hello

  D: is not a partition backup of your machine.

  Acer has a time set up their machines to the way yours is:

  They had a C: drive for the operating system, a drive D: for data (music, movies, etc you would like to register and a recovery partition 'hidden' to reinstall the operating system and to make the recovery discs to do the same thing.)

  You can merge C: and D: as a whole, BUT save all data on D: first because it will be deleted when you merge.

  "How delete and extend a Partition with Vista disk management"

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  And YES, you back up the data on an external hard drive in case of hard drive failure, the corruption of the system, etc.

  See you soon.

• Pre installed Vista on iQon will not start. No available disk. The manufacturer had to cease their activities. I have the product key for Vista. Buy a Microsoft store repair disc?

  IQON laptop manufacturer had to cease their activities. Pre installed Vista - no disc. Vista will not start. Unable to access restore or recovery mode.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  And Microsoft sells more than Vista.

  Try this:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to the website of the manufacturer of your computer (In your particular hardware manufacturer case) and get the latest drivers for your particular model computer or laptop.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you want to try the Startup Repair tool, read this information:

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.