Properties L50-A-138 satellite appears another logo of the manufacturer

Similar Questions

• L50-B-27N satellite PSKTQE - pilot page displays the wrong divers?

  Hello Forum,

  I bought a Satellite L50 B 27N with the short code PSKTQE.
  I use this site to download the driver:
  http://www.Toshiba.de/innovation/Dow...jsp?service=de

  Is it possible that there is the wrong display drivers?
  For example the WiFi network is an Intel Dual Band Wireless-AC 3160 and not a Broadcom/Atheros one.

  If I install the graphics driver AMD I get the message that the driver has stopped working. I tried to install Blutooth and something else, but the number of damage not recognized in Device Manager does not drop. I think that the drivers do not correspond to the laptop.

  Is there a list of what I need to download drivers, or what I'm looking for everything manually?

  Thank you

  Peter

  The drivers are not wrong, but different L50 - B PSKTQE Satellite models could be fitted with different equipment; That is to say different WLan modules.

  Some of the units in charge Atheros, Broadcom or Intel (there are 2 different modules) wireless network adapter...

  If you need to download the right driver

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• L50-A-19N satellite will not start in the BIOS

  Hello

  I have a problem with my laptop.
  I have installed 8.1 and fedora 20 windows.

  I was in fedora, when I decided to restart Windows.
  Instead of grub, I saw message with the error and my notebook has stopped booting.

  I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

  It will not start any further.
  I decided to get my system, but when I press F2 or F12, nothing happens.
  I can't get into the BIOS!

  Please, help me to solve it.

  Somehow, this seems really strange
  I m wondering why you are unable to access the BIOS

  What you can try to do is, remove the laptop HARD drive and switch on and press F2.
  From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

  But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

  However, your comments would be greatly appreciated

• Upgrade processor for Satellite L50-A-138

  What are the processors spend at L50-A-138?

  Can I put Intel i7-2820QM?

  Update CPU or Exchange is not supported so, in my opinion, you should not think about it.
  More info on what you can read on - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Since my upgrade of the CPU experience (I ve tested on older models) will not offer a spurt of fast execution. If you want more performance without risk to upgrade your 4 GB maximum RAM 8 GB support and exchange standard fast SSD HARD drive.
  Believe me you will see the difference.

  One last thing. I don't know how old is your laptop, but this action will void the warranty.

• My C50D-A-138 Satellite play DVD

  My laptop Toshiba C50D-A-138 play DVD. I have my laptop in May and for the first days I would let me play DVDs but since then it will not play them, it's just noise wurring as if he's trying to open but it used. I tried to download VLC and various media players to see if it would help, but it's not.

  My laptop will play CD and computer games when I put the disc in but when it comes to DVD, they usually open and I don't get a notification to say that there is a disc in. When I enter my PC folder and look at the D drive and it shows the name of the DVD, but when I click it opens in a folder showing a folder of video content and sound (something like that) and if I right click on disc he D when there is a DVD in and click on "open autoplay". , he wurr of for a few seconds then stops and noting happens.

  I hope someone can help.

  You try to play original DVD or just some kind of course copied movies?

  > When I go into my PC folder and look at the D drive and it shows the name of the DVD, but when I click it opens in a folder showing a folder of video content and sound (something like that)

  This means that the ODD (optical disc) can read the disc (DVD) because the content of the DVD is available.
  The question is: why the software is unable to read the game, the contents of the disc.

  There are a few possible reasons for this:

  (1) the disc isn t out to countries in the region that is defined in the parameters of the STRANGE. The settings can be found: (right click on region D drive properties Hardware tab properties button DVD DVD/CD). In my case the DVD region has been set to region 2. In this case, I can play DVD disc released for region 2.
  _Note: _ this settings can be changed only 4 times. Then it will not be possible to switch to another area code.

  (2) the software you are using is unable to read the contents of the disc. But VLC player is one of the best players available on the market (free) and it should be possible to play almost all drives using this software. However, the preinstalled DVD Toshiba playback software should also read the original DVD discs.

  (3) another reason why the STRANGE can not read the disc correctly, is the dirty laser lens. In this case, it will take to clean the lens of the laser using a fluid tip and alcohol of wadding.

• L50-A-1FK satellite - cannot boot from USB port

  Hello

  I am a first user of this forum
  It is a problem with my computer and don't know how to fix it.

  My computer is a L50 A 1FK Satellite with Windows pre installed 8.1.

  I'm not impressed with new Windows10 and I'm back on Windows 8.1.

  What to do when I start to install a version of Linux Mint meadow look.
  It is impractical to restart the computer to. Al dough BIOS is changed by marketing, that to look for start-ups to the USB. It does not work. If I try the same thing is happening with a live CD or DVD.
  How can I make sure that there re-boot on the USB.

  As in advance,
  Rob (Wildspoor.nl)

  Hello

  In order to boot from external sources (CD or USB port - flash memory stick), you need to disable startup secure in the BIOS.

  There is also a startup mode option (UEFI).
  In case the new (Linux) system would not support UEFI mode, you must change this mode of CSM.

• Satellite A200-1The logo does not light

  I have the toshiba satellite a200 1The model.
  When my laptop is working must satellite type lights logo (front, left) or not?
  In my notebook is always disabled.

  Is there a problem and how can I solve this problem?

  I have a Sat A210 and my Satellite logo lights.
  But I can turn it off in the BIOS settings. It s called Front Edge Logo

  Please also check your BIOS settings if similar parameters are available.

• Whenever I start my PC, a message appears, says another user using the same IP address. Is this a problem

  Whenever I start my PC, a message appears, says another user using the same IP address.

  Is this a problem

  Yes.  One or both may not work properly.  If you use static IP ADDRESS a simple reboot of all devices should correct this.

• menu shows update for photoshop 5, bright room 4, camera raw and other programs.  Cannot download. When I click on 'more', the screen shows me typing in the serial number on another screen, but the screen never comes to the top. my order number appear

  menu shows update for photoshop 5, bright room 4, camera raw and other programs.  Cannot download. When I click on 'more', the screen shows me typing in the serial number on another screen, but the screen never comes to the top. my order number appear in my adobe account.  so I don't see that Wizard download was interrupted.  After trying SEVERAL times to download updates, how do I do?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

• Black screen appears in green on the Satellite

  It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirely green with the usual letters. And after starting, there are green stains all over, especially there where it should be black.

  Can someone help, please?

  Hello

  For me, this looks like a defective screen. It might also be malfunction of the inverter FL.
  However, it seems that there must be a hardware failure. In this case, the only way is to contact Toshiba service for assistance.

  To be 100% sure that it of not a software problem, you can try to recover the operating system or / and try updating the graphics card driver.

• Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

  Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

  Hi Figgerty,

  have you tried these steps?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

  B Eddie

• Satellite A60 crashes and restart the cycle - missing or damaged system32\DRIVERS\Ntfs

  I have a Toshiba Satellite A60, who has recently developed a serious problem and is currently blocked in a crash restart cycle. He started with the message "missing or damaged system32\DRIVERS\Ntfs", I've read about this problem on discussion forums, but am still unable to find a solution.

  Currently on start error messages appear indicating a driver is missing or damaged, the Toshiba start page has vertical lines of missing data and on a few occasions it will fully start after a short period of time vertical lines appear on the screen and it crashes.

  I tried a number of bugs:
  * Re installed windows XP pro (formatting the hard drive and renew the partitions)
  * Update the bios on the site of toshiba in version 1.90 (I think that the update also flashes the bios, but would need this confirmation?)
  Swapping the hard drive with a portable, yet no longer starts and HD works fine in another laptop, dismissing the possibility of missing or corrupt files.

  I realize that this could be a problem with the RAM and think that the laptop has 512 fixed to the motherboard, accessable without stripping down, but do not know how to determine if the RAM is the problem. While trying these fixes, I get problems with the start of the player and can only get the disk to launch and recognize the CD about 1 to 10 times.

  Could someone suggest a remedy or a fix I can try? or suggest how they fixed a similar problem. Thank you very much

  You ssounds not very good ;(description
  The hardware malfunction appears to be responsible for the vertical lines on the screen
  If vertical lines appear also an external display, the jury may be wrong.

  You re right, I Googled, and it seems that Sat A60 supports an internal memory.
  As far as I know, this memory cannot be removed and only an electronics could solve this internal memory.
  But are you sure that the internal memory is impaired. The device supports only 256 MB internal memory and other modules are removable
  If you can try to replace

• How to hide Adobe Captivate Identification (logo) in the navigation bar?

  Hello

  My name is Caroline of Central America in Guatemala, I am new to using Captivate and I´d like to hide the logo or the which of Adobe Captivate, that appears in the navigation bar of the published project.  I have seen in some videos tutorial and I´d rather have´nt is not appearing in my projects.  Is this possible and how?

  I´ll appreciate your help,

  You can choose another playback bar, via the Project menu, editor of skin on the tab control reading. Most of the bars of reading do not have the logo...

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.