The message send failed.

Similar Questions

• The message send failed - Please verify your account settings are correct.

  I got Thunderbird established and working for years with multiple accounts. All of a sudden today, I can't send all messages in ANY of my accounts with several Web hosts. The message I get from all of them is:

  The message send failed.
  Check that your Mail & Newsgroups account settings are correct and try again.

  I checked my settings. The look that is configured in the same way they always do. I can send email with these parameters from my phone (K9 Mail on Android program.)

  All my accounts that can receive messages in Thunderbird. I get new messages and I can read them.

  If I try to save a message as a project over IMAP, I get the error:

  Unable to save your message as a draft.
  Check that your Mail & Newsgroups account settings are correct and try again.

  What could possibly change to make Thunderbird exhibit this behavior? I tried without thunderbird downgrade to the previous version and it still had the same behavior. I tried to start in safe mode without the extensions, and he had always the same behavior. Here are my troubleshooting information:

   Application Basics
  

     Name: Thunderbird
     Version: 31.7.0
     User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
     Profile Directory: Open Directory
  

               (Local drive)
     Application Build ID: 20150511105107
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Memory Use: about:memory
  

   Mail and News Accounts
     account1:
       INCOMING: account1, , (imap) sub4.mail.dreamhost.com:993, SSL, passwordCleartext
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, true
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
  

     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account3:
       INCOMING: account3, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account4:
       INCOMING: account4, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account5:
       INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

     account6:
       INCOMING: account6, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Crash Reports
  

   Extensions
     Flat Folder Tree, 1.1.2, true, [email protected]
     Google Contacts, 0.7.12, true, {BDD92442-0534-4D6F-A966-BAB7D561D781}
     NoComposeAccount, 1.3.1, true, [email protected]
     Xpunge, 0.6, true, {786abda0-fd14-d247-bf69-38b2fc18491b}
     Enigmail, 1.7.2, false, {847b3a00-7ab1-11d4-8f02-006008948af5}
     Messaging Menu and Unity Launcher integration, 1.3.1, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       accessibility.typeaheadfind.flashBar: 0
       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size_cached_value: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       extensions.lastAppVersion: 31.7.0
       mail.openMessageBehavior.version: 1
       mailnews.database.global.datastore.id: cbdcac30-9bd0-4a88-9a66-31a0abff554
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1435582206
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
  

   Graphics
  

       Adapter Description: X.Org -- Gallium 0.4 on AMD RV620
       Vendor ID: X.Org
       Device ID: Gallium 0.4 on AMD RV620
       Driver Version: 3.0 Mesa 10.5.2
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: cairo
       AzureSkiaAccelerated: 0
       AzureFallbackCanvasBackend: none
       AzureContentBackend: cairo
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.6
       4.10.6
  

       NSS
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS Util
       3.16.2.3
       3.16.2.3
  

       NSS SSL
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS S/MIME
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

  The problem was that my directory/tmp was not mounted. I don't know why it has not been mounted, but restarting the Assembly fixed.

  Thunderbird was IO error trying to create temporary files. The error messages were misleading, making me think it had to do with e-mail accounts.

• javax.xml.soap.SOAPException: Message send failed: connection reset

  Hello gurus,
  
  I try to install IAM on a cluster deployment. I have a physical as a front-end load balancer, which ensures the load to alternately between the two servers where IOM managed servers are deployed.
  When I try to start an approval process, SOA server seems to not be able to connect to the servers of the IOM, which gives the following error:
  
  < 23 April 2012 12:01:11 CEST > < error > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not send request to http://identitymanagement.mydomain:14000/workflowservice/CallbackService because of the exception
  javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: connection reset
  at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:851)
  
  where < identitymanagement.mydomain > is the host name of the cluster. Maybe SOA calls are directed in the timeout while trying to connect to the IOM (cluster balancing algorithm times), so, considering that Web services take time to answer (say 10 min), I want to know if there is such a setting on SOA to configure so that it never go into the time-out in the meantime that web services to answer.
  
  Thank you
  Carole

  Ejani,

  If you want to confugure time-out, see as follows:
  Re: Asynchronous BPEL 2.0 problem - Transaction rolled back to

  But I'm not sure that it is on the side of the soa. Try to increase the parameters of time-out on the (Bounce the server SOA) load balancing

  Arik

• I want to install the ios 9.3 update in my iPad. I get the message: "audit failed because you are no longer connected to the Internet" actually, my wifi works and I'm online. Help, please.

  I wanted to install an update to iOS 9.3 on my iPad mini legacy. After that I entered the password for my motto. I receive the message: "check failed because you are no longer connected to the Internet. I then checked my wifi and works and I can go online. why I can't update? Help, please. Thank you

  This is a known error for which Apple seeks a solution. See Troubleshooting iOS 9.3 update problems.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• Messages sent from XAI - flat file vs. Outbound sender of the Message Sender

  I have a CC & B 2.3 environment running with demo data and test stuff with XAI.
  
  I created the following configuration:
  1. new business based on the outgoing Message MO object
  2. new Type of outgoing Message associated with this BO
  3. new XAI sender that uses the class of XAI FLATFILESNDR
  4. new external system that connects the new Type of outgoing new XAI sender Message.
  
  Next, I set up a Type of case that creates an instance of the BO triggered by an algorithm of status enter. It all works very well and an outgoing waiting Message is created. Now when I start the MPL an XML file is generated successfully. So far so good :)
  
  Question 1: if I set in the configuration of XAI sender use a file name as template "Message$ $ID.xml" the generated XML file looks exactly like this, however him $$ID is replaced with an unknown ID. According to the help documentation, it should be a NDS and NDS file entry is not used when working with outgoing Messages, as far as I know. Then who can tell me what kind of ID is used in the name of the file? It is not the outgoing Message ID.
  
  Question 2: When I change the configuration of XAI sender use the XAI OUTMSGSNDR instead of the FLATFILESNDR class I got errors when the MPL treats an outgoing pending Message. I get the message: Sender 'null' not found. At first, I thought may be due to automatic schema validation, but even if I disable this option in the Options of XAI error returns. The documentation is unclear about setting up a sender of XAI XAI OUTMSGSNDR class using. Everyone here was able to get this thing to work? Should I specify some options in the context of the XAI sender tab?
  
  Published by: Ruud van den Brand, June 1, 2010 05:27

  Question 1. In v1.5 when you use NDS and the $$ID was identical to the ID of NDS, but since v2 and the introduction of the outgoing Message, I think you will find that the randomly generated number. If you want to be able to give this file a meaningful name have a look at the following 2 hotfixes (6732869, 7420329).

  Question 2. If you take a look at your OUTMSGRCVR receiver you will see the OUTMSGSNDR sender as the answer...
  Note that these are reported only once, and are used to process outgoing messages.
  They are not used to send the message to external systems. The real sender to external systems is the external sender. Do not use the OUTMSGSNDR here.

• If your texting someone for the first time, who doesn't have an iPhone will be the message send iMessage again? And if it it will say delivered?

  I'm trying to text a friend of mine, but I don't know if it I phons or not. Messages sent in iMessage and read as given, but I don't know if the message only send in iMessage if it's to another iPhone or if it is a default setting to always text iMessage, he reads such as pronounced?

  Cece,

  Use with your iPhone, iPad or iPod touch - Apple Support message explains how to use iMessage.

  Basically, if a message is presented with a blue text bubble, iMessage has been used. If the message is presented in a bubble of green text, SMS has been used.

  

• Windows 7 Home Premium... weekly back ups fail, get the message "backup failed."

  Recently my regular weekly back ups fail to find. Everything seems to go well until maybe halfway through the procedure when the backup stops & I get message "backup failed." Unfortunately, did not keep a note of relative error code... no useful guidance please.

  I'm glad to hear that you managed to solve your problem.

  Flash drives are a medium of reasonable storage but not the best. I recommend that get you a disk 2.5 "500 GB hard in a USB enclosure. They cost less than $60.00. Here's why:

  • They tend to be more reliable than flash drives.
  • They have a much greater capacity.
  • You can (and should!) use them to store an image of your installation.

  On this last point: this time you could solve your problem with system restore and FixIt. The next time you is maybe not so lucky. You may need to do a full reload of Windows which is tedious and often exceeding the capabilities of the user. By creating a picture now, you will be able to restore Windows to its current state, anything.

  You begin the process of creating image via the control panel / backup and restore.

  If you already have a backup flash drive then you could alternate backups between the flash and drive 500 GB. That would give you a rock solid backup system!

• How to solve the message "Installation failed to Initialize"?

  I've used Adobe products for over 20 years. Now I'm really stuck, and cat live has not been helpful at all (no answers to my questions, just instructions ignoring what I'm saying, which is in fact already tried all of the suggestions/instructions, and they did not work). My OS is Windows 7, professional reception. I bought CS5.5 Design Premium on a CD and tried to install it. The CD seemed to work; the installation started. Then nothing happened for more than an hour, so I canceled the installation and rebooted my computer. Now when I try to install, I get a message saying 'Could not initialize Installation' and I have to watch the whole show on the link Support Advisor. When I do this, the Manager finds no error. I can't find the Setup logs. Chat live suggested that I change the ODBE (or something like that) to the 'old' file, and then try again. It did not work. I downloaded the Application Manager. This did not help, either. Copy the contents of the CD to the desktop did not better results. Live chat suggested that I have download the trial version and then try to use my legitimate serial number. I said that it does probably not either, because the first attempt of CD issues had not been resolved. Nine hours later the free trial download is complete, and after all this, I got the same failure to initialize the message. I answered to my 'record' and, so help me, the representative of the customer even replied, telling me to download the trial version. In other words, it completely ignored the fact that I had tried and it didn't work. I looked on the forum and there was a discussion on this "initialization failed", but the discussion was completely in German, which helps not at all. I hope that someone on this forum can help me in this process; This software is mega expensive and should come with better support.

  Yes, it seems that if you run in a permission issues when the Setup program attempts to write to your disk.  I recommend to create a new local administrator account and try the installation under this account.  Alternatively, you can consider running the installation in a selective startup upwards to minimize interference from other applications or services.

  The following documents should help if you need any indication as to the following steps:

  Create the local admin account. Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/create-local-administrator-account-windows.html

  Restart Windows in modified mode | Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html

  If this fails, you can also try to log in using the built-in Administrator account (Windows 7 and Vista) - http://helpx.adobe.com/x-productkb/global/log-using-built-administrator-account.html , and then perform the installation with the built-in Administrator account.  I recommend the creation of a first local user account well only in case your existing user accounts have had their permissions compromised.

  If you can answer it please get back with the results, it would be appreciated.  If you have additional questions about the steps listed please do not hesitate to reply to this topic as well.

• What's happening: exception 'RTCError' with the message "connection failed"?

  Hello

  I focused the second time this week that there are problems with the connection to the servers of low-COST airlines. Last problem was at about 10:30 CEST. It takes at least 15-20 minutes - I know not how long this problem has really, because I know about this than if my customers report a problem. For the same reason, I don't know if this has not happened more often, because I'm not check every 5 minutes.

  When this problem occurs, I have exception:

  'RTCError' of exception with the message, "Cannot connect" in /var/www/lib/LCCS/lccs.php:774

  Stack trace:

  #0 var/www/lib/LCCS/lccs.php(666): RTC::http_get ('http://collabor...', Array)

  #1 var/www/lib/LCCS/lccs.php(255): RTCAccount-> do_initialize()

  #2 (...) RTCAccount-> __construct ('http://collabor...) ")

  (...)

  No idea what is worng? Some work on the Adobe servers?

  I hope it will be useful for people with similar problems.

  We sought with Jamie Ho where is the problem, but it is impossible to detect the reason. Traceroute test shows nothing interesting. Newspapers to also analyze.

  The solution we found another server (hosting in other place / data center) uses as a portal to communicate with supply services. It has helped, and that door connects no problem now.

  But what is strange, we tested more servers and it is a lottery. One of our test servers could not make any connection with procurement services. I found here http://forums.adobe.com/thread/772442 that this is not a new situation.

  This is what it looks like now. We monitor it all the time, but for now this Portal Server solution seems good and he is the only one that solve problems.

• "Message sending failed".

  For the last month, I am unable to send messages. The error message indicates that the server has expired. I contacted my ISP provider, but they are unable to find the problem. I've deleted and reinstalled Thunderbird without any result. I followed all the advice from the support section. (https://support.mozilla.org/en-US/kb/cannot-send-messages) I am running Win 7. My ISP provider is Bell Fibe. My email provider is Bell. Firewall and anti-virus is Bitdefender Internet Security, 2015.

  This does not solve the question, but thanks for the answer.

• Company the Message Source failed

  Hello

  I'm trying to set up Enterprise Message Source on BAM. I have create a queue in the database.  When I try to start this source on the BAM I get: oracle.bam.common.messaging.api.exception.OpenFailedException: BAM-00533: resource opens for destination jms/BAMEBIZTopic failed.

  Fix is the file I used (Oracle Documentation: integration between Oracle E-Business Suite 12 g and Oracle 11g (11.1.1.2.0) BAM)

  Any suggestion?

  Thank you.

  Hello

  It's classname of the foreign server. The good news is: oracle.jms.AQjmsInitialContextFactory

  Kind regards.

• When I connect to eprint center I get this Ajax error message sending failed: Error = 403 Forbidden

  When I sign in the eprint back I get the following error message

  Ajax submit failed: Error = 403 Forbidden

  Hope you are doing well and welcome on the HP Forum.
  Sorry to hear that you are experiencing this issue.

  We will do this 1

  -Restart the computer.
  -Open the browser (Internet Explorer, chrome, FireFox, Safari, Opera) of your preference and delete it cookies and internet history (navigation). In the browser of your trial preferably by singing or by subscribing to e-print.

  If the above does not solve your problem, please try this.
  -Use another browser (Internet Explorer, Chrome, firefox, safari, Opera).

  That's also what I heard from other members of the forum.

  I have heard here (the other members of the community) that there is a problem in which the engineer working on diligently can affect this particular process. At the same time, I know that other members have some success using the above steps.

  I hope this helps!
  RobertoR

• I recently bought a Photoshop CS6 upgrade. (Dec 9, 2014).  Today, I downloaded the file (Photoshop_13_LS16.7z downloaded this OK when I tried to execute the file (Winzip) I received the message following 'failed to initialize installer.) Could be due

  I recently bought a Photoshop CS6 upgrade. (Dec 9, 2014).  Today, I downloaded the file (Photoshop_13_LS16.7z

  This downloaded OK

  When I tried to execute the file (Winzip) I received the following message

  "Installer failed initialize." Could be due to a missing file.  Please download Abobe support Advisor. »

  I tried to do and he told me that Adobe support Advisor no longer exists.

  Could you please say a solution.

  Extract it to a different location inside a folder dedicated and make sure not to destroy the hierarchy of files and folders within the archive. Also run the installation with privielges stuff and sufficient user security turned off.

  Mylenium

• How can I remove the message "sending progress bar?

  When I send an e-mail, sometimes with a send notification with a scrolling box progress bar. How to disable this option?

  Tools(or AppMenu/options)/Options/Advanced/general/Config. Editor, copy mailnews.sendInBackground into the search box, double-click to change for real.

  http://KB.mozillazine.org/Thunderbird_3.0_-_New_Features_and_Changes#Send_in_Background