THE MICROSOFT FIREWALL PROBLEM

Similar Questions

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• the router firewall problem

  Hello

  could you please be so kind to help me with a problem I have with the firewall of the router (Linksys WRT110) Linksys Wireless.

  Run the firewall test, I get this message:

  Your system REPLIED to our requests for Ping (ICMP Echo), make it visible on the Internet. Personal firewall plus can be configured to block, delete and ignore these ping requests to better conceal systems against hackers. Is strongly recommended as 'Ping' is among the oldest and most common methods used to locate previous systems to further exploitation.

  Thank you very much.

  Fred

  Thanks for the info.  I run the test on the Gibson Research site with a scan named ShieldsUp.  But if you say that it gives false results, I am happy, I don't want someone hack into my system, my son we homeschooled tru internet and this school would be a big problem if someone with bad intentions hack here and do who knows what.

  Thanks again.

  Fred
  

• Firewall Windows isn't the default firewall, that maybe it's because another firewall service is installed or because the Windows Firewall is disabled.

  Today, I ran a stack of Microsoft Fix it programs.

  It was performed several times and was not able to get the windows firewall the firewall by default or to recognize as being on.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  Diagnose and automatically fix problems of Windows security
  Hide the last execution results
  Past performance results (Friday October 7, 2011 15:13:03)

  Windows Firewall is not the default firewall	Not fixed		Other Solutions
  Activate the anti-phishing filter	Checked		Other Solutions
  User Account Control (UAC) is turned off	Checked		Other Solutions
  Antivirus software	Checked		Other Solutions
  Status of antivirus software	Checked		Other Solutions

  Firewall Windows isn't the default firewall, that firewall Windows cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled.

  When you view the control panel > windows firewall, the firewall is enabled (recommended)

  Recently, I uninstalled McAfee Antivirus and installed Microsoft Security Essentials.

  Please indicate how to troubleshoot, and windows firewall to be the Firewall default or recognized under the name away.

  How to test the firewall to see if it is or it is not working properly?

  This problem has been resolved.

  The MSE has not recognized that the windows firewall was conducted.

  This problem has been resolved by running McAfee software removal followed by uninstallation tool and relocation of MSE.

  After reinstallation, I rebooted and the updated definitions.  He reported no problems with the Windows Firewall or the absence of firewall or at risk.

  I ran a full scan of MSE and we found no malware.

  For others who may have the MSE/firewall problem run followed by appropriate software removal tool to uninstall and reinstallation of MSE.  It takes time, but it worked.

• I get the error code 5 when I try to start the Windows Firewall

  Original title: Windows 7 x 64 firewall won't start, tried everything

  Hi, ive tried enough what was described in the first 10 pages google search, but I cannot get rid of the known problem of firewalls

  For me, this is the error code 5.

  As soon as I try to start it manually, it says cannot be started.... error code 5.
  I did a system win7 files repair, I did a reset of network, I tried about 30 different commands to display information about the firewall service, ive checked the firewall authority loading driver, I gave permission to complete firewall of all registry directories described, ive created entirely new firewall rules 1:1 to the default ones, ive checked other 'ordinary' process runs in the firewall service and and and.

  NOTHING helped me.

  Others facing this problem actually get another error for the first code after a few solutions, they also face the "error code 5.
  Oh yes, I also tried the microsoft firewall tool.
  He says theres a problem with the firewall, but can not solve.

  I never had no infection or OneCare / 3rd Personal Firewall running.

  And because I can't deal with that firewall, I also can not use transferred ports - which is terrible bad since im was the owner of a local game server.
  But that happened in ive faced the problem as it was half a year ago. And I can't be solved without format my drive.

  Because you guys are part of Microsoft personnel - and has got the possibility to contact the developers - why cant you just create a firewall package with latest updates that crushes real files/settings in order to solve problems that are found by your own tool?

  Its a shame, I hope that you can offer me new solution :(

  -You are using a third-party firewall software?
  At no time.

  Was there the recent changes on your computer before the show?
  No, not at the time the problem occurred, also not 1-2 weeks before.

  Method 1:
  Returns the error Code 5, as I indicated in my problem

  Method 2:
  Tried 2 - 3 times yesterday, , everything including the Microsoft Tool to automatically fix problems.

  Method 3:
  I've done a complete check-up and recover system, no modified files files have been found.

  Also, the batch file to start/restar services:
  SC config start = auto MpsSvc - success
  SC config start = auto KeyIso - success
  BFE sc config = auto start - success
  SC config start = auto FwcAgent - fail ' [SC] OpenService error 1060 - service is not installed.

  net stop MpsSvc - Service not started
  net start MpsSvc - cannot be started - error Code 5

  the rest - success, but still, the firewall service does not.

  Seems that the firewall service or part of it gots uninstalled something?
  Perhaps in the case of update?

  Also I can't find no "FwcAgent" file in my system drive while showing the system hidden files and folders.

  I guess that's NORMAL given that verification of files windows did not find any changes.
  Theres no light at the end? Really?

  Moreover, the hotline also could not help (and you get his terrible btw, managed a total noob). The suggestions here are much "deeper", still nothing worked again.

  --------------------------------------------->
  EDIT:
  Looking around the means how to re - install the firewall component windows I found another unofficial repair tool.

  It fits quite all associated in any way with the security settings and firewall components, as it recreates all the rules and rights of dirs and registry keys.

  And what should I write - it WORKED.
  Let me share with you: http://www.tweaking.com/index.php?/content/page/repair_windows_firewall.html

  AND YES:
  Someone should stick this tool in front of microsoft developers, but the hard way.
  How is it, some hobby programmers can create these simple tools that beat anything from microsoft developers?

  I hope that my solution works for the many thousand other ppl that I found on the net - who could not solve their problem (even) with the firewall in vista/windows7.

  Please mark this topic as "BOLD" and possible GREEN :-)
  Thanks again for your help, John Rubdy!

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• Microsoft Fix it hangs on the resolution of problems

  I get an error whenever I go to Windows update and can not get updates. So I tried to use the Microsoft Fix - it tool, and it hangs just to solve problems.

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Step 2:
  I suggest that you put your computer in a clean boot, try to install the updates and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Note:
  How to configure Windows to use a Normal startup state after using the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.

• I have a problem with the Windows Firewall.

  Original title: Firewall Windows does nothing, any ideas please error due to unidentified problem window

  I have windows xp sp3 with internet explore 8 and windows firewall when you press says in a window because of unidentified problem, Windows cannot display Windows settiings firewall.

  Hello

  This problem is caused by a missing or corrupted SharedAccess.reg file. The SharedAccess.reg file represents the Windows Firewall service.

  1. you have any other firewall software or security running on the computer?

  2. have there been recent changes to the computer before the show?

  I suggest to try the steps provided and check if they help to resolve the issue.

  Method 1: Diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2: You cannot start the Windows Firewall service in Windows XP: http://support.microsoft.com/kb/920074

  Method important this section, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Impossible to display the Windows Firewall GET an error due to an unidentified problem, Windows cannot display Windows Firewall settings

  OP: Problem with Windows XP service pack 3__ firewall settings

  When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".

  I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?

  In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).

  Thank you

  "See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
  If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety

• Problem not identified in the Windows Firewall settings

  Original title: Windows Firewall settings

  I went to allow an exception in my firewall settings, but I got a "problem of unidentified" wouldn't let me in.

  Hello

  You are welcome.

  Now, you know that when you have another firewall installed, Windows Firewall will automatically deactivate.

  I suggest you follow the link as reference below:

  For your information:

   

  Use the Windows Firewall:

   

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/using-Windows-Firewall

   

   

  I hope this helps.

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• I have a problem with the Windows Firewall enabled.

  Original title: my laptop says, "solve pc problems: turn on the firewall of Windows (important)", but I can't activate the firewall of windows... help me to turn it on

  I see this message,
  ' Pc problem: turn on the firewall of Windows (important).
  but I can't turn on the firewall...
  Help me to activate windows firewall... (I use Microsoft security essential, already, I scan the laptop completely)

  Hi Wendy,.

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service Windows (0x5), BFE service is missing or Windows remote assistance does not work

  Check if the Windows Firewall service is running?

  Go to run (Windows key + R) and type services.msc

  Check if the Windows Firewall service is running.

  Method 1:

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:

  Go to Control Panel , then Action Center

  Click Security and try to turn on the firewall there but once again, make sure that the antivirus installed on your PC do not have its own firewall or it will not illuminate.

  Let us know the result.