the module is in use

Similar Questions

• Error: the module is in use

  I use JavaLoader copy my app on my BB. But now for some reason I can't delete it. I always get the message "error: the module is in use" and even if I turned off my BB or even remove the battery. Any advice?

  Copy with cmd: JavaLoader-u zedi_efmwalkup.cod

  DELETE with cmd: JavaLoader-u zedi_efmwalkup

  Produce a JavaLoader u dir

  net_rim_bb_timezoneotapatcher             2.3              28268     Wed Feb 28 17:12:25 2007net_rim_bb_lbs_resource_en                1.1.35           33412     Fri May 04 10:08:43 2007zedi_efmwalkup                            1.0.332          143588    Wed Sep 24 18:11:59 2008GoogleMaps                                2.2.3            449508    Wed Jul 30 17:25:06 2008
  

  BlackBerry 8700 v4.2.1.101 (Platform 2.3.0.81)

  Forget about it. The Application loader in Desktop Manager manage to get rid of it.

  And here are the reasons why you may need to use the - f option.

  -The reason for which reset is required when you upgrade an application
  Article number: DB-00602

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

• How to put the name of the Module file and use the current file name in the code?

  Hello

  I create SequenceCall (in MainSequence), but there must be the Module file name and existing file where the module. I found an old function that are not part of the API (TS_SequenceCallModuleSetUseCurrentFile() and TS_SequenceCallModuleSetSequenceName(). Those who are in the help file, but not in tsapicvi.c.

  You can help someone with this (CVI code)?

  Best regards

  branar

  Hello

  Problem is solved using different fp (tsadpcvi.h, tsadpcvi.c). Instead of using tsapicvi.c with TestStand 4.2, the missing functions were found in tsadpcvi.c with TestStand 2010).

  Best regards

  branar

• Flex 3: when to use the Modules, when to use components?

  When is it appropriate to use modules and components?
  
  My first impressions are:
  -use components for reusable level page items
  -use modules for the sections of the application that could stand on their own
  
  Now, I'm not clear if I should put the contents of each view as its own module or if I should group similar views in a single module.
  
  Thoughts?

  I understand the modules in this way:

  They are tools. User management is an independent module if it consists of one or more views. But remember that they need to relate to each other. Here, for example, when have a complex user administration, so add/remove module ID users and relate to business users is another module. Does make sense? The loading time will be improved, but when compared with a 'standalone' application, more bytes are loaded. The project here has grown from 3MB to 17MB, but as said before, not all everyone, then takes 90% of our users it shrink 3 MB more or less than 2 MB.

  While developing, I had a few problems, because there are still a lot of bugs with the modules.

  I recommend using a design template, so it will be much easier to work with this module. I'm used to Cairngorm, but use it with models of field, models of presentation and dependency injection.

  I hope my post can help you.

  Kind regards
  Peter

• Firefox v.41 asking to allow the modules whenever I use Firefox

  Using Windows 7 - since installation v.41 whenever I use Firefox it asks me to activate each add-on and not automatically by loading automatically - how can I stop this from happening? I want that they automatically load as if they were with v40.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

  If this did not help, then also delete the files addons.json and addons.sqlite possible.

  Alternatively, you can check for problems with preferences.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• Question on the removal of the device using javaloader App: error Module is in use

  Hello

  I tried to remove the app inside using javaloader, but it shows error: the module is in use

  Use f as parameter

• How can I DISABLE the module "signature" when I want TO use an older add-on?

  I the MAGNIFICENT Add on 1 - ClickWeather and now has a message on the 'signature' module Now... I DON'T want to use a product of INFERIOR quality such as suggested in the name of the add - on.

  I would use the add-on that I already have on my Firefox, 1-ClickWeather. So, how can I disable the 'signature' on an individual add-on module? It is said to "Act with caution", but it does not show Me the details of my time. I reinstalled the add-on, but it does not yet record my position.

  Yes, I KNOW it is no longer supported, but has always worked until this past Saturday. It was abandoned several years ago but was kept alive by a single poster whose comments have disappeared. I have the add-on on my computer. I continued to update the continuous Firefox updates. Now, I want to again but there's this ridiculous thing on the module "signature" and «proceed with caution...» »

  You cannot delete the warning, but in 42 Firefox extension should always work.

  See:

  • https://wiki.Mozilla.org/addons/Extension_Signing
  • https://blog.Mozilla.org/addons/2015/02/10/extension-signing-safer-experience/

   Firefox 40-42: Firefox warns about signatures but doesn't enforce them.

• SQLite Manager does not work with the v11. Until make you it easier to go back to older versions or newer versions stop, breaking most of the modules I won't use Firefox

  SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?

  Update Firefox 23.0 which published yesterday afternoon.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• What source address should the NI9862 module CAN be used to send messages j1939?

  I am developing an application that will write and read on vehicle ECU road. I CAN NI9862 module and drivers XNET. I can read an ECU data. I can write a CAN bus frames but the ECU under test does not appear to read the message. I don't get any acknowledgement of bit type and the SHIELD in question (a dashboard) does not change its messages in anyway, nor change the gauges or witnesses.

  Complicating this is the fact that the ecu is 'Brand X' and it is PGNs belong to someone. I tried to send the message of inquiry PGN (PGN59904) but get no response from the ECU. I use the 255 (global) as my source address.

  Is there a source given for the NI9862 in J1939 address?

  Thank you

  There is no specific source for the NI9862 address. It can be used to simulate one of the 256 available addresses. If you try to simulate a test off-board tool, usually has an address of 0xFA.

  I'm afraid that if you do not know the PGNs he expects or addresses that it expects to see, you will have great difficulty to operate.

  Good luck

  Bob Young

• using the module time real Labview in RTAI

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  Cecile says:

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  I don't think it's possible for anyone outside of OR. LabVIEW Real-time supports this time only Windows as host and as a target only material of National Instruments with specifically targeted OSes or the Pharlap ETS system on x 86 systems with hardware specific enough. Using RTAI as target OS for LabVIEW Real-time applications requires first a few changes on the time plugin real LabVIEW to support this new platform.

  None of the files in time real LabVIEW also created for either platforms OR running VxWorks or OS Pharlap, Pharlap ETS system woud be able to be deployed to a system RTAI, because they are not compatible. In the first place, you'd have to port the bunch of shared libraries that make up the time target real system running LabVIEW on one of these goals to your RTAI system which is in fact a whole new platform of LabVIEW you can create with a little effort from the LabVIEW source code. It's not really impossible for OR as most of the code LabVIEW is written platform completely independently, but it would be a combination of the parameters compilation for course LabVIEW Real-time, with the settings to produce time targets real LabVIEW VxWorks with some additional settings of Linux. Yet, it would be by far not trivial and some parts are actually hardware specific drivers that must be worn too and limit the possibilities of what RTAI material could serve even further. In short not something that would make any commercial sense NC because they invest a lot of resources with no opportunity to sell additional hardware.

  And hell freezes over up front release of NI LabVIEW source code in any form which gives access not - OR used to it!

• How can I measure the output of a sensor pwm ultrasound using the module or 9403

  How can I measure the output of a sensor pwm ultrasound using the module or 9403

  Khalil,

  When you say 'measure' the PWM signal, exactly what to tell you?

  You're looking to measure the frequency or cycle of the signal function? You count the edges of the PWM output increase? Looking to control the waveform?

  With reconfigurable FPGA hardware, it is up to the user to define the function of the physical i/o on the FPGA chip. By connecting the signals as Adam suggests your digital pulse will be brought to the cRIO. In your FPGA program, you define the function. You can set a base counter or transfer digital data from single point to welcome you cRIO for floating-point more complex treatment. Example FPGA programs are located in the http://www.ni.com/IPnet.

  Hope this helps, please post any additional questions.

• What version of VxWorks operating system is used by the Module of Realtime LabVIEW 8.6

  I have in the past created VxWorks shared libraries for use with the Module of Realtime LabVIEW 8.2 and 8.5 and there are various required tools due to the change in versions of VxWorks by these two Versions of LabVIEW.

  For your information, I would be interested to know if changing to LabVIEw 8.6 Realtime Module will require still a new compilation, or if this version is always based on the same core VxWorks 6.3 and my shared lib would therefore simply continue to work?

  Rolf Kalbermatter

  Hi Rolf,.

  Great news; VXwork version is still 6.3, so we have no problem with the migration to this version.  Please let me know if there is.

  Best regards

• RT: fault 9512 module when you use the hybrid mode

  Hello, I have a problem with my configuration of hyrbid cRIO. I am currently using Labview 2010, cRIO-9074, x 1 NI 9234, and NI 9512 3 x.

  Summary:

  What you trying to accomplish?

  -J' built two screws, one who acquires the data of a NI 9234. This vi is one that uses the FPGA due to 51.2 kHz sampling frequency needs. The other is to playback motion and three NI 9512 s (scan mode) encoder. Both work fine separately (on the same FPGA bitfile), but when I copy and paste the VI for the NI 9234 in VI for the 3 9512 x s and click Run, the fault of motors.

  What are the steps needed to reproduce the problems?
  Click on execute in the joint (prepared program_2VItesting.vi).

  What measures, if any, you have taken to solve all the problems and the results of your attempts
  -J' have confirmed that if I turn the two screws separately, they work fine. The first time I combine work 9512 s for a second (i.e. the engines a bit) on the two screws. Then he cracks. I then used the distribution manager to clear the fault and run it again (note: there is no error code, I just erase the Red led on the module by changing the configuration mode and active mode). Every time the first time the engines do not move at all.

  -J' have confirmed that I have properly configure this kB from hybrid mode:
  http://digital.NI.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690

  I have attached the vi of two combined screw (prepare program_2VITesting.vi) together. Half upper is program FPGA copied and pasted (as noted by the reference open VI) and the bottom is the scan mode (as noted by the timed loop). I've also attached the separate screw (program prepared and JustDAQ) that can also work well now by pressing justing run.

  Am I missing something simple here right?

  Thank you

  Troy

  So it turns out that you just put the cRIO in Setup mode when you set up your open your ref FPGA and reset. Then change to the active mode (any program) before you do anything else in your program (i.e. the very very beginner). A picture is attached.

  -Troy

• How can I use the Module Robotics compass indicator?

  I need to use the Module Robotics compass indicator.

  I would like to know how to pass a value to him? What is the scope?

  Thanks in advance

  Guilherme

  It is a digital indicator, where the entrance is in degrees.  0 degrees is North, 90 is East, 180-South, etc.