the monitor settings

Similar Questions

• increase the brightness on the monitor

  the brightness on my monitor setting reduces the brightness of my screen, but I can't raise the brightness later. Anyway there?

  Hello

  (1) what is the brand and model of the computer?

  (2) don't you make recent changes before the show?

  (3) you get an error message/code?

  (4) you specify the monitor settings or settings in Windows 8?

  Method 1: Enable adaptive brightness

  1. On the start screen, type Control Panel , and select the control panel.
  2. Set the display: drop-down category menu
  3. Select the material and audio.
  4. Select the Power Options.
  5. Click change plan settings on your current plan of power
  6. Select change advanced power settings
  7. Expand the view
  8. Expand enable adaptive brightness
  9. Change the setting to enabled , and then select OK.

  Method 2: Check the settings in the power options:

  1. press the key Windows + X to display the system menu, and select Power Options.

  2. in the power Plan that you're using, click Change Plan settings .

  3. click on the link change advanced power settings .

  4. in the options dialog box, scroll the screen and expand this option.

  5. search for the parameters of brightness and the brightness of the display.

  Method 3: The computer screen. Laptop displays is not brightness or contrast buttons on the front. For the majority of laptops, there is not a control for adjusting the contrast. However, you can set the brightness of many laptops by pressing on and the Fn key, and then pressing a function key to reduce brightness () or increase brightness (). Calibration of the color display on a portable computer, set the display for setting the maximum brightness.

  For more information on the definition of the brightness and contrast of your display, see the documentation that came with it or go to the manufacturer's Web site.

  For reference:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Please report if you are still having the problem. I will be happy to provide you with additional options available that you can use to get this problem resolved

• Dual monitor - display 2 drops on the display settings.

  I'll have to go regularly to the Customization screen, and then to view the display settings 2 not coming after the system goes to screen saver mode is.

  The parameters display and position display, (centered in screen 1), are remembered everything except the screen recover-it is just blank.

  All I have to do is click on the image of the screen 2, and he re - wake up.

  The Machine and view the details below:

  • Dell Inspiron 545 - Intel Core 2 Q8200-2.33 GHz 2.33 GHz
  • 4 GB of Ram
  • NVidia GeForce 9400GT with 1024Mo - DDR2 memory
  • Windows Vista Edition SP2 Home Premium - 32-bit
  • Display 1 =
    Reference Dell 2005FPW 1680 x 1050 (natively). 60 Hz/32-bit color - DVI - PC connect display
  • Display 2 =.
    LG 19 "monitor to 1350 x 768 (native): 60 Hz/32-bit color - VGA - PC connect display

  NVidia drivers are current.

  Any help would be appreciated.

  Hi John_P

  Sorry, but Windows key + P made no difference.
  I had to resort to the usual solution by going to "Customize" then "display settings" and clicking on the image of the screen 2.
  Happy new year and thanks for trying to help.
  John

• My monitor times out after 10 minutes, even with all the power settings set to 'never '.

  How the hell can I stop the monitor to close every 10 minutes?

  Are you sure that the monitor stops and it is not the screen saver 'Black Screen '?

  If you are sure that the monitor is turned off:

  Have you already checked the Plan "Advanced settings" (a link on the page edit Plan settings), make sure that 'turn off the display after...' is set to 'never '. Or maybe you need to set "Adaptive screen Shutdown" OFF.

  If it still does not, maybe it is a parameter of your graphics card, use the Control Panel then.

• When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  

  Disable Composite preview at trim:

  

  MtD

• With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options

  With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options are there in the video tutorial. But they just do not appear in my software.

  Which version of CC do you use? Numbers, please! And your BONES... and I think you're looking in all the wrong places.

  The CC2015 ranges are found on a "Lumetri Scopes" tab in the top left panel so the color workspace and the central panel Lumetri Scopes tab in the workspace of the effects.

  

  Looks like you're clicking in the program monitor, but this is not where the scopes...

  Neil

• Calibration of the monitor... L * settings?

  I usaully calibrate my monitor to a gamma of 2.2, but it has been suggedted she can?  better to use the gamma L *.

  Can someone give me some info if this is true?, or,

  Give me a link explaining the optimum settings in gamma of the monitor calibration settings?

  Any help would be appreciated,

  Thank you

  Mike

  There is no optimal target. Only L * if you have a really good monitor that can be calibrated to a deltaE in point 1 and you know very well what you are doing. Very few applications (only the properly color managed ones) will show you a correct color if you go. Otherwise, you should choose 2.2 and 6500 K for almost all cases. If you do a lot of internal printing and have a view calibrated printing environment, it sometimes makes sense to go for calibration of color temperature 5800 k. For some screens, it is better to use the native color temperature and the native gamma for calibration, but most of the screens do not need that.

  Essentially if you have to ask, you probably won't do.

• When you use Windows Live Photo Gallery SCREENSAVER, monitor off, regardless of power parameters. The power settings work with all the other screen savers.

  Windows Live Photo Gallery screensaver does not extinguish whatever my power settings.  This is the case with Windows Live Photo Gallery.  When you use any other screen saver, the screen turns off according to the way in which the power settings are defined.  It is quite frustrating because I prefer to use as my screen saver Windows Live Photo Gallery.  But he will stay indefinitely if I stop it manually.  Someone has any idea how to solve this problem?   Thank you.

  Hi MaynardCrossman

  
  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

  I hope this helps.

• Color variation of Windows 7 on two screens despite the correspondence of the monitors, model, connection & settings

  I'm managing about 20 machines to windows 7 64 bit, but have noticed that, in each of them with two screens, there is a slight color variation (right monitor being darker and more colorful) between the two monitors despite the monitors of the same brand and model (workstation make & models vary).

  As a test I switched monitors and the problem remains.
  I also tested the type of connection cable / in case the fault is due to the difference between VGA/DVI but the prob persists indicating is not the screen, indicating that it is to the BONE (the denominator) as graphics cards vary also in the brand/model.
  would be very happy for any help you can offer
  Thank you

  Hello

  The question you have posted is better suited for the TechNet forums. You can post the question on the link below.
  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps!

• Calibration of the monitor on the Satellite L755-18Z

  Hello world

  Here's a question:
  My screen is very bright.
  In NVIDIA Control Panel, I have 2 choices:
  1. other applications control color settings
  2 use the NVIDIA settings

  If I choose nr. 2 - everything works well until the next reboot - ' other applications (I guess Windows OS) "takes over - monitor is very bright once again, and I need to go to the NVIDIA Control Panel and apply 'use NVIDIA settings' again. (However, the brand remains in option 2, and I have to mark opt. 1, then mark opt. 2 again and press the "Apply" button). Everything is a bit irritating.

  Someone knows what to do in this situation?

  Hello

  Check out this Microsoft page on the color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  Very interesting the calibration of the screen part where you can find a step by step instruction how to enable disable calibration loading Windows.

  It seems that the standard calibration of Windows crushes the nVidia settings and in my opinion, this could be resolved by disabling the Windows calibration.

• HP compaq dx2400: running onboard gpu and graphics dedicated both to the monitoring of multi

  I have a hp compaq dx2400 office with the nVidea graphics card

  I want to run two monitors which can be pluged only using the standard VGA cable, so I have a pluged into the nvidea card and the other to the motherboard. the problem is that they cannot be run at the same time, I can activate the integrated graphic card or the dedicated. in the BIOS settings > advanced > premium graphics, I can choose only run the onboard one or the "PCi - e' one, I checked all the other parameters of the bios, but I can't find something could run together.

  What is a bios problem? so if I update the bios a new option will be available to run with dedicated on-board graphics? any help please

  kassem1

  Hello;
  
  Let me welcome you on the HP forums!
  
  Sorry, but your options are to use one OR the other - not both.

  There is no updated BIOS to change this.

• HP 2311 x buttons on the monitor does not

  My monitor has decided that he does not want to turn off, or let me any setting.  Sometimes it works, sometimes it doesn't.  However more recently, he decided not do not work any more work.

  None of the buttons work, I get no message on the screen, I can't turn it off or change the settings.  I just got the monitor there are 3 or more months and this just started happening recently.  He did that sit on my desk.  Anyone with experience please help me!  I have an LG which is 2 years old and everything still works very well on this subject, it's not that I play with anything other than the power buttons, but it's pretty boring.  Any help is appreciated.

  Hi Paul,.

  Your monitor is covered by the warranty for a year if you bought it new.  Maybe you need to contact HP support.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• PS2 and Qosmio G20 - use of the monitor button, it just sounds

  Could someone please help? Hooked my ps2 using the composite cable but when I press the monitor just button, it beeps and does nothing.
  I know that the plug is broken can I get a picture through win DVR.
  Any suggestions would be greatly appreciated. Thank you

  1. open programs, then
  Improving the image-utilities-2 utilities. Toshiba
  3 monitor the setings of entry
  4. Select monitor IN or S video IN
  5. apply the settings

  Enjoy

  min

• Satellite A200 - 1 M 8: the monitor shuts off and cannot back up to Vista

  Hello

  I have the Satellite A200 - 1 M 8 with original Vista. Sometimes, I have some problems with the display (I have the latest drivers).
  The monitor turns off (not as usual but it is gray instead of black) applications flow normally (I hear the music of film, this) but I can't get back into windows.

  When I push button hibernation and I try to go back to windows, I see the blue screen then the computer resets.

  It happens very often and is really frustrating because my internet disconnects and downloads.

  I don't think that the temperature is too high because I think it's cool. How to fix this?
  Maybe some graphics settings or new BIOS?

  Please help me. I can't stand it!

  null

  Hello

  Your laptop is preinstalled with recovery delivered image, or if you have installed your own operating system?

  I have the Satellite A200-1CR preinstalled with original Toshiba Recovery DVD. I use the laptop quite intensively all day, but I never noticed anything like that. Since when did you notice this strange behavior?

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?