The mouse buttons are not switched

Similar Questions

• "the scroll of the mouse button does not work.

  I'm sorry. I don't know what to tell you more. I'm out of ideas.

  This is a pretty old post so I don't know if you'll see even this or not, but I thought I would just in case others have had this problem. I don't have a rock solid solution, but of course, I had to deal with this issue over the years several times. Usually with the mouse PS/2. I also had very difficult to find useful to question answers. It seems that there are many people who simply do not use the middle button as a shortcut for double click. I hate not having this double click the middle button.

  Finally, what works for me (years before), it's that I found a Logitech software that everything worked well with my PS/2 mouse 3 button. I think it was like Version 9.03, and no less.

  Now, I'm having the same problem again with the USB mouse... drivers or lack of pilots. When you have the problem, if you look in your Dashboard under the software of your mouse, you will likely see that there is no option of three buttons available. There the scroll wheel and click lines how much you want to scroll to each tread of the wheel (or if you want to lock the scrollbar) but no third option button and that's the problem. You need to find a driver that has this option and you can get it to work with the mouse that you ever then your problem is solved. This is a Windows problem... nothing in the bios either.

  I'm sure that there is someone out there who has a better tham solution = n me but at least if someone knows this problem... you are not alone, and now you know... it's the fault of Windows!

• lock the mouse button does not work

  It worked fine until a few weeks ago.  Now, I need to left-click while using the touch of the finger. I'm going to: mouse properties, buttons, lock, turn on click-lock and ok.  It does not help.  Thank you.

  Hello

  1 did you change on your computer?

  2. What is the brand and model of the computer?

  3. I suggest you perform the clean boot and check.

  Method 1:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to update mouse drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

• I put my mouse ps2 connection in my computer, but now the mouse buttons do not work. The pointer moves, but when I click it won't let me select anything?

  I checked the mouse on another computer and it works fine.

  Hi stevebaxter,

  1. When was the last time that the mouse was working fine on the computer?

  2. What is the serial number and model of the mouse?

  3. do you have security software installed on the computer?

  Check and make sure that you have installed the latest drivers for the mouse on the computer.

  Also, make sure that all the settings of the mouse on the computer are correct.

  Customize your mouse settings

  http://www.Microsoft.com/windowsxp/using/Setup/personalize/mouse.mspx

  If the previous step fails, then check if the mouse works in safe mode, and then comes back with the details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• How to safely clean the mouse buttons? (Acer Aspire V3)

  My mother spilled coffee on his laptop Aspire V3, and now the mouse buttons do not work.  The touchscreen always moves the cursor, but the buttons do not respond.  How can I fix/clean these buttons safely?

  Only by removing the entire unit, until you are able to see if there are still coffee in the notebook. You can be sure that everything is dry now. It was enough to break something, especially a bad sign.

• Kensington Trackballworks sometimes has several icons in the tray system, exposed behavior, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected

  Original title: Kensington Trackballworks sometimes has several icons in the system tray

  Every so often from the start (no apparent reason) multiple Kensington TrackallWorks icons appear in the system tray and the unit behaves erratically until all but one of them are closed. Behavior exhibited, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected. I use a Kensington Expert Mouse and TrackballWorks 1.04 K64325 model number. Uninstall and reinstall the driver didn't help, or does uninstalling and reinstalling Windows.

  I checked with MSCONFIG, Autoruns and even when several copies work they show only one entry for the application. Any ideas /.

  Hello
   
  Since you've already tried to uninstall and reinstall the driver/windows, this could be a hardware problem. Please try to contact the manufacturer of the mouse for assistance on this issue.

  http://us.Kensington.com/HTML/1458.html (you can select the Technical Support of this link and then select Product Knowledge Base)
  http://us.Kensington.com/HTML/1445.html

• I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together.

  I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together. they are indervidual buttons. Have all the updates and service pack installed.

  I saw the screen shot, I think that Aero is disabled, or the Desktop Window Manager Session Manager service is disabled or stopped. Try to run the troubleshooter 'display the Aero effects. " And when firstly, you had the drivers that do NOT support Aero and then updates, Windows does NOT automatically update the settings. You must recaulculate the computer for Aero Performance Index is enabled.

  Or you can see more help on this page, which contains explanations of the Aero and a link to a Web page for downlading an application which solves the problems.

  Hope that helps!

  Marko Calasan.

• Can not change the mouse buttons

  I tried new mouse on my computer, and now my computer will not recognize the original mouse as a Microsoft mouse. The keyboard and the mouse still work, but I can't change the buttons of the mouse for left-handed people my family before I had no problem doing this. The original mouse is a Sony Vaio device that works wirelessly with a keyboard via a USB input device. Any ideas?

  See if that will help:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Delete my preferences file and restart the machine seem to have solved that problem.

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• y at - it a button to remove all the nuances that are not used in an file?

  Hey all,.

  I was wondering is there a button that removes all the nuances that are not used in an illustrator file?

  Any help would be great

  Look in the Actions Panel. It should be an action he who says to remove all unused items in the Panel.

  

• The membership tab IS on and still no button send and most of the other options are not the useablee

  Under file, display, editing and all the other tabs, most of the functions does not work. The Send button is not working either.

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• No KeyPress triggered if the mouse button is held on the control

  Hi all

  I am trying to catch the outfit/auto repeating keyboard inputs at the same time I'm clicking on a slide ring switch, to change the direction of the slide of entry as a Shift key.  (actually, I would like to use the SHIFT key, but apparently not raise events keypress at any time, so I resorted to letter keys).  I check for the KeyPress in the recall of Panel, it fires well if no mouse btns are in a hurry, or if they are pressed on indicator or decorations on the Panel.  But as soon as I click on any control with an active entry, all keypress events stop until the mouse button is up, then keypress starts shooting again, completely defeat the purpose of simultaneous inputs.  I put the test code in the callback of slide control, and it does not receive the keypress events or if the mouse button is pressed, if it does if it has focus, but the mouse button is up.

  Any ideas?  I'm still using ver 6.0 if it makes a difference, try to get it to improve myself to 8.0 but try to do something on the old version, while I wait.

  Ken

  I didn't understand exactly what Ken was referring to. Let's try another approach: a reminder of command triggers a LEFT_CLICK or COMMIT event even it the SHIFT key is pressed, to Ken can intercept the desired event and then test the State of the keyboard, in this way:

  If (event == EVENT_LEFT_CLICK) {}
  GetGlobalMouseState (NULL, NULL, NULL, NULL, NULL, &keys);)
  If (keys & VAL_SHIFT_MODIFIER) {}
  MessagePopup ('Event', "shift key is pressed.");

  }
  }

• my left mouse button does not

  HID SJ920MJ03802 REV A2 5 Windows 7 compatible mouse

  First of all welcome on the forums of axe!

  There are many things wrong with your mouse to the left button does not work. I suggest possibly making sure that there is nothing of clicking (e.g. dirt).

  And if you have a guarantee that I would come back, if not buy a replacement.

  Mike