The mouse cursor slows and freezes

Similar Questions

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?

  
  

• On-screen text is faded-unintelligible, audio playback is corrupt and the mouse cursor freezes erratically?

  Hello

  Suspecting a severe virus attack, I reinstalled my O.S. Win7x32.  I see now several faults, I.e. the mouse cursor freezes, corrupted - the text to audio playback screen is faded and illegible in places?

  Any help would be greatly appreciated.

  Thank you in advance,

  John B.

  Sorry, but, all that said... FAILURE OF THE MOTHERBOARD!

• Qosmio G20 - the mouse cursor freezes

  Play command and conquer tiberium wars a coupke of minutes in the game, the mouse cursor will feeze not allowing me to select units, etc.. I have to use Ctrl, alt, del to exit the game. This does not in all the other games that I used on the laptop. Is there something I can do?

  Details of my laptop are: the present report time: 24/03/2008, 09:49:38
  Machine name: YOUR-3CB2BF2DC5
  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227 - 2254)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Qosmio G20
  BIOS: v1.30
  : Processor Intel (r) Pentium (r) M 2.26 GHz
  Memory: 1024 MB RAM
  Page file: 508 MB used, 1952 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  Hello

  If I understand your game freeze but who knows why this happen. As you can see it happen with this game only.
  Have you tried to delete this game and make new facility?

• The mouse cursor freezes, Silverlight Plugin, Windows 7 Pro 64 bit.

  When activated, the plugin Silverlight 4 freezes my cursor of the mouse on the web pages with Silverlight. Disabling Silverlight plugin restores the function of the mouse cursor, but disables display Silverlight content. Occurs with the latest versions of Firefox and IE. The PS2 and USB Wacom input Tablet mouse freeze. Keyboard PS2 remains active, except the "Mouse keys" used in the cursor. Must press 'Back' key to get the silverlight content web page up the function of mouse cursor. Update drivers Wacom and drivers MS Intellimouse Optical. Uninstalled and reinstalled the Silverlight 4. Problem remains.

  Platform: MS Win 7 Pro 64-bit. All updates current. Material: Card mother Asus P6T, Core i7 930 CPU, 10 GB of RAM. Security through Zonealarm Extreme Security Suite with active Forcefield. No problem on my PC with Win XP Pro 32-bit.

  I can't determine if it's a bug with Silverlight/Win 7 64 bit or a problem with my computer/hardware. I don't have problems with my mouse cursor otherwise. The research of this question gave no solution. Suggestions to solve this problem would be appreciated.

  Hi DelgadoFlash,

  1. did you of recent changes on the computer?

  2. the problem persists both 32 and 64 bit browser explore?

  This can happen if you haveWacom Graphire Tablet input connected to the computer.

  You must disable Tablet PC Input Service in the Service Manager and check if the problem persists.

  (a) click Start menu and type services.msc in the search box and press enter

  (b) later in the list of services, locate Tablet PC input service.

  (c) make a right click on it and click Properties, set the Startup Type to disabled and press the Stop button.

  (d) close the services window

  After disabling the service above you won't be able to use the device.

  As a work plug the appliance only when you need to use.

  Rename an executable file calledWISPTIS.exe in the C:\Windows\syswow64 directory to something likeWISPTIS_old.exe.

  WoW64 is synonymous with "Windows on Windows 64-bit", and it contains all the files of 32-bitbinary required for compatibility.

  If the above step works, then you will need to contact Wacom to check if they have released an update on this issue.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• After recovering the Satellite L300 is slower and freezes

  Hello

  I just restored my 1DN back to factory settings L300 - but now I find that my computer is very slow and freezes for 1 second about every seconds frew. Certainly, it does not perform as it did before you restore the factory settings. For example videos etc. freeze every few seconds and do not play smoothly as they did.

  No idea why this is and if she has nothing to do with the restoration of factory settings? And how can I solve this problem?

  Thank you

  Hello

  After the laptop recovery procedure is certainly not up-to-date and I imagine that many Microsoft updates will be downloaded and installed. If you use the factory settings it is on automatic and several hours or maybe two updates will be downloaded and installed.

  While the installation of updates that I can imagine that the notebook is quite slow and you'll be noticed freezing or stopped video playback.

  Before you start using your laptop, install all updates and optimize the operating system preinstalled. Typical result of the new installation of the OS's slow start.
  Please check this thread. You can find a useful tip how make your computer faster.

  Good bye

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• My XI Acrobat Standard 11.0.09 lost menu bar (F9) and crazy jumps full screen, losing windows buttons high bar, passing just above the menu bar with the mouse cursor, without clicking.

  My XI Acrobat Standard 11.0.09 lost menu bar (F9) and crazy jumps full screen, losing windows buttons high bar, passing just above the menu bar with the mouse cursor, without clicking.

  Yes, it's important somehow. Kapersky broke it somehow and fixed. http://Forum.Kaspersky.com/index.php?showtopic=307391&HL=Adobe

• El Capitan slow and freezes.

  Hello

  Since Friday, June 3 of this year my iMac has been regularly making slower with the spinning beachball showing when I open an application and when playing iTunes, YouTube, Vimeo, VLC etc the system just freezes then starts again normally. I ran Intego Internet Security, run CleanMy Mac but also run the same Washing Machine, Intgeo reinstalled El Capitan, but its still slow and freezes. Also, the activity running monitor did not throw all the problems.

  No software has been downloaded or installed until this happened, just from appeared Friday and has gradually deteriorated since.  I bought the iMac in 2012 and its been a joy full every day since then. Even that by typing the text in the screen freezes then the rest of the sentence make it up a few seconds later. Also scroll, left and right mouse click can take up to 25 seconds to work, even if the mouse works no problem, if that's any help.

  My system is:

  iMac 27 inches (mid 2011)

  3.1 Ghz Inel Core i5

  16 GB at 1333 Mhz RAM

  1 TB HHD

  OS X Version of El Capitan 10.11.5

  Any assistance here for me would be really appreciated.

  First of all, get rid of all the software Intego and CleanMyMac.  They are not necessary and can only add to the problem of slow system and applications.  Do a Google search to find the developer instructions to uninstall.

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• do not move the mouse cursor

  Hi all. today I did something really stupid. I was in a chatroom without supervision earlier and another person and I'm in it and I could tell definently I makes him angry. I left the chat room and 15 minutes later im on another site and the cursor of the mouse is suddenly freezes and does not scroll on the page. everything else seems to work very well. so I restarted the computer, the mouse works when the windows password page appears, so I type the password and then loading this page and the home page comes (one with all programs, etc.) and appears as soon as that is when the mouse cursor freezes and not scroll or move. everything else continues to load and seems to work very well. If I restart the computer and put it in safe mode and the mouse works moves very well and everything. Anyway, the bottom line is I think the other person sent me a virus or something that is used to pass my cursor in normal mode. What should I do? also, I can't get the sound to work on my computer in safe mode. says low right volume icon ' audio service does not "and I want it running in safe mode, until I can get this cursor problem is resolved. any help is greatly appreciated and please explain in terms laymans, because I don't know anything about computers. Thank you very much for your time and have a great day.

  Hi crazyforfrance,
   
  As the mouse works properly in safe mode I suggest you try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:
   
  Clean clean boot.
   
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  Note: In safe mode you may not be able to hear the sound because the sound drivers and other drivers may not load and only essential drivers can handle, which are very important to run an operating system. and it's a way of diagonistic.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.