The mouse disappears after using the touch screen

Similar Questions

• I use the touch screen of Windows 8, and after that I use it, my mouse pointer disappears

  My problem is similar to other positions, but not exact.

  When I use the touch screen of my computer in windows 8, the mouse disappears and does not come up until I restart the computer.  After the restart, if I use the touch screen, even once, the needle does not again.

  Hi Tony,.

  This problem is caused due to conflicts of device, you will not be able to use the touch cursor when a mouse is connected. You will be able to tap on the touch keyboard, but when you scroll or drag the mouse cursor disappears. I suggest you to disable one of the device and check if it helps.

  To disable the touch screen, refer to the following steps:

  a. click the Start button and click Control Panel.

  b. access the material and audio.

  c. click Pen and Touch.

  d. click on the contact tab.

  (e) uncheck the box use the finder as input, this disables touch and stylus.

  Otherwise, you will need to disconnect the mouse.

  Please reply with the status of the issue so that we can better help you.

• HP Paviliion cursor disappears after using the touch screen

  Hello

  So, I just bought a new laptop from HP Pavilion special edition beats 15z Touhscreen about two weeks ago. I was with the sliders and just decided to try some custom cursors. I have downloaded them (link to the page for the sliders below) and selected in the Control Panel, no problem. However, as soon as I use the touch screen, it disappears (which is normal), but when I try to use the touchpad or mouse, it doesn't come back, unless it's one of the other cursor types: link select, busy, etc.. Also, if I use custom to select all normal but the cursor jumps back. Finally, even if I click on a link that would otherwise use the selection cursor link using the touchscreen, the link selection cursor appears again when to switch it on touchpad.

  The other problem is happening sometimes just by default, for the most part in Google Chrome. However, with the custom cursor happens no matter what, and it's a major problem.

  Thanks for you help with anything that can give me.

  Data sheet:

  Windows 8

  AMD A8 - 5545M APU with Radeo HD Graphics, 1.7 GHz

  8 GB RAM

  processor 64-bit / x 64

  Full Windows touch support contact w/10 Points

  link to the download page for sliders: (if so, Im just trying to display all possible information)

  Slider Preview/download page

  Hello Tony,.

  I apologize for the inconvenience caused.

  Lets try the following methods and check if it helps.

  Method 1: As you said that it happened also with the default cursors as well, I suggest you to try the mouse setting in Windows 8.

  1. go in Control Panel.

  2. go in the mouse settings.

  3. uncheck the option for the mouse to disappear while typing.

  4. now check if the system built in the cursor disappears.

  Method 2: As you say it happens only with custom sliders, I would suggest that you check to see if the problem persists even after placing the computer in a clean boot state.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Hope this information can help, just reply to the State of the question for any other help.

• Bubbles of rogue IdeaPad S210 killing the use of the touch screen

  Hello

  I just bought a Lenovo Ideapad S210 a few months previously. When I start using the screen touch everything works for a few seconds and then bubbles randomly with about a half inch in diameter start popping up, usually horizontally across my screen. These bubbles I'm referering to are the Visual effect when a finger touches the screen. So far, these bubbles of thugs seem to reproduce every time that I start to use the touch screen and help control my cursor with my touch pad, touch screen, or an external mouse once they appear. The only thing that works is to stop the laptop, which is a big inconvenience.

  No idea how to resolve this please? It runs on Win 8 by default.

  Hello

  Yes it's the touch input indicator where it shows where a tactile contact is made through the screen.

  It cost the LCD touch screen is defective it is like being pressed detect entries of contact on the screen.

  I suggest calling technical support on this issue and I do not know that they will know what are the options to take in this regard.

  Best regards

  Solid Cruver

• How to detach the screen from the keyboard, and how do I use the touch screen without stylus?

  I have a gateway M285 ta6 t2300 clocked at 1.6 ghz dual core 1 GB 40 GB combo windows 7 tablet laptop 2-1 d. I don't have a pen for the touchscreen, but because I bought it used... I would like to know if I can use the touch screen using my fingers or do I have to buy a pen and if so what kind? Also, I would like to know how to detach the screen from the keyboard.

  Hello

  I suggest that you go to the Gateway Web site and download a manual for the model that will show you how to use it.

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  See you soon.

• The touch screen does not work after a reset.

  Original title: lost after factory reset touch screen

  I bought an acer aspire z1801 on the secondary market, the former owner has done a factory reset to delete personal data, but now there is no touch screen. If I look in the windows 7 Home premium, there is not a program for pen and touch, I learn that something happened when restarting a part of windows is missing? If I can add this section or I have to re install a new windows 7 on my computer, if I have to pay for the program I could go directly to the upgrade of windows 8 and that would be the missing piece?

  Thank you

  Hello

  Welcome to the Microsoft community.

  I see that contact drivers are missing on your computer.

  You can check this link to order tp download and install the drivers:

  http://support.Acer.com/us/en/product/default.aspx?modelId=3796

  Alternatively, you can contact Acer for assistance with the issue of touch, because the question has started to occur after performing a factory reset.

  Here is an article which described on 'Upgrade to Windows 8'.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this helps.

  If you need help with Windows let us know.

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• Using the touch screen and the touch pad at the same time on Windows 8

  How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

  Help, please!

  Hello green,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your PC Acer laptop?

  Thank you for your query details.

  I also like the fact that you want to use the touch screen and press the key at the same time.

  Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
  Reference:
  With the help of a precision touchpad
  http://Windows.Microsoft.com/en-us/Windows-8/touchpad

  You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Is there a Windows API that I can use to turn off the touch screen of WIndows 8?

  It makes sense for a Tablet have a touchscreen. A valve system, I would like to live without a touchscreen.

  I would like to disable the touchscreen disabled if a machine is not in tablet mode. However, I can't find any API to do it on Windows 8. in Windows Mobile, there are APIs such as DisableTouch and EnableTouch. I wish I had such somethings on Windows 8 Pro. When the touch screen is disabled, the OS will never be aware of activity on the touch screen.

  Is anyway to do this?

  Thank you

  Youssef

  Hello

  It seems that you want to disable the touch screen on a Tablet using the C++ programming language. I suggest that you post your question in the MSDN forums. The community on these forums is more experienced to answer questions related to the programming language.

  Here is the link for the same thing. Thank you.

• HP7500A printer use Visual indicators under the touch screen

  There are Visual indicators 'print' named 'fax' 'scan', 'copy' 'web '. below the touch screen of my HP7500A multifunction printer.

  Initially, I thought that these are the access keys; There is however no working when I press on them.

  What is the function of these buttons, or only for reasons of aesthetitcs?

  Kind regards

  KERO Mero

  Hello KeroMero,

  The words '' print' 'fax' "scan" "copy" "web" "describes the functions performed by the printer.

  They are not keys.

  Touch screen is the only place to interact with the printer.

  Kind regards

  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• use of the touch screen in windows 7

  HII. ! can I install the touch screen on my laptop lcd screen and my i know of it available price for the 15.6-inch screen and is the brand?

  Hello

  Thanks for the reply, in my experience, that you can not install this series Z, Lenovo people need to check with their system configuration IPS by your serial number of machine, you will need to take the serial number of your laptop and lenovo support calls,

• Disable the touch screen for a laptop Windows 8?

  I have a Dell XPS L702x infamous Ghost by clicking on issues where the touch screen randomly 'clicks' on arbitrary areas of the screen (mine seems to be in the lower right corner, often minimize all my open windows or opening calendar) and through the upgrade to Windows 8, it seems a former N-Trig driver who disappeared I would disable the touch screen. Now, I have no way to disable the touch screen, and while Google suggested release "Use your finger as input device" under the pen and touch, I don't even have this available to UN-click box on!

  So: How can I disable the touch screen on my laptop or y at - it a program that can do for me? I am indifferent in fact using the touchscreen - I'm more concerned with the ability to functionally use my laptop without sporadic clicks on my screen.
  Thank you.

  I had the same problem with XPS 17 my wife.    I needed to restore basic functionality so that disabling the touch screen was acceptable.     However, unlike samie (but like you) I didn't "Use your finger as input" option in the control panel.

  I tried to disable the device N-Trig driver in Device Manager, but the pilot did not appear to have be properly installed (after the upgrade from win7)

  I went on the N-Trig (http://www.n-trig.com/Content.aspx?Page=Downloads_Drivers) driver download site and download the new drivers for windows 8 (I have the feeling that they weren't here last week).

  I then when options "Device Manager" on the "Hardware and Sound" page of the control panel.

  In the Device Manager screen, I saw a node N-trig DuoSense digitizers with several below subnode (before dev driver install it there was only one).

  I right mouse button on the element at the top, with a name that ends by "between the roots" and select "disable."

  This touch screen successfully disabled.

  Pity to lose the touch screen, but my wife does not use it and I was in danger of my life, as it was.

• How to disable the touch screen of the Toshiba LX830 - 11 d

  Hello

  I managed to break the touch screen on a Toshiba LX830 - 11 d.

  The machine runs Win8 and always works with a USB keyboard and a mouse, although he thinks there are plenty of touch of the finger around the damaged area.

  Is it possible to disable the touch screen feature so that I can use it as a 'normal' PC or remove the screen touch himself leaving a simple LCD screen?

  Thanks for any advice.
  Dennis

  You see the touch screen in Device Manager? Maybe you can turn it off in there.

• Is there a way to disable the touch screen on a TouchSmart 520?

  One of my cats likes to stick his nose in the touchscreen.  Is there a way to simply turn off the touch screen on a 520-1020?

  Hi cs700,.

  Here's how:

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  The touch screen no longer works to the touch.  You should now use the mouse and keyboard, just like any other computer.

  Repeat these steps to reactivate it.  "You also have to check"Enable multi-touch and inking gestures", it turns off when the" use your finger... "is disabled.

  Hope that helps.

  If you like my answer, say thank you with a Kudo. ***

• Re Bios Update issues: how to disable the touch screen on the x 360 Pavilion

  I applied the recommended bios update yesterday and now the touchscreen active almost continuously when I do not use it.   which makes it pretty useless mouse too.   I know that HP will release a bios that resolves this problem later, but in the meantime how do I disable the touch screen?

  Thank you google for helping me solve my problem

  http://Lifehacker.com/disable-your-laptop-s-touch-screen-in-Windows-8-1-1588333600

  now can someone let me know once an another bios update solves the problems of touchscreen presented the last of them?