the multiplexing control file

Similar Questions

• Disable the break control file

  Please can someone tell me how to disable the breaking control file that is attached to a data definition, it is no longer necessary for this definition of data...

  I need an option without re-creating the data definition

  Concerning

  Check this https://community.oracle.com/thread/1027694

• Retrieve by using the backup control file

  Hello

  I was reading a book called Pro Oracle Database Administration by Darl Kuhn. There, under the theme of "The valuation of the loss of all control files", noted that all data files and control files are restored from a backup, because if we do not restore the data files the RCS in control files would be lower than the data in these scenarios files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It is then mentioned to use 'recover the database by using the backup control file' then apply the logs (archive and redo if necessary).

  However I personally tested this script in a test environment and to bring all the backup control file could issue the same command as above and recover the database.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  Thank you

  If we do not restore the data files, the RCS in control files would be lower than the data files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It would be incorrect you have determined. You can only restore the control files. You can manually create a control file and always do the restore.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  The control file is updated as well.

  See you soon,.
  Brian

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• How to get the break control file in the xml editor

  Hi all
  
  I use oracle Apps r12 and Bi publisher 10g.
  
  I followed these steps to burst Xml reports
  
  http://apps2fusion.com/apps/21-technical/251-xmlp-concurrent-program-revisited-with-bursting.
  
  I created the definition of data and now I need to reach the break control file.
  
  If the system will generate burst control file after the creation of data definition, or to create a control file.
  
  Thanks and greetings
  Srikkanth.M

  You must create a control file and upload it.
  You can also check this blog for detailed steps http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html

• Post in print, using the burst control file

  Hi all
  
  We use the break control file to print and send. Email option works very well. But when it comes to printing, printing "PDF file not printed. 128 MB of memory is necessary to allow a direct PDF printing"in printing.
  
  We use CUPS and this is the way that we use for printing.
  
  IPP://localhost:631/printers/YG_MAIN
  
  When we try to run the same program manually, giving the name of the printer and the number of copies at 1, then we are able to see the pdf output. Other reports are normal bi publisher also works well, w.r.t. this printer. We face this problem when we run xml program, with the option of printing bursting.
  
  Suggestions please...
  
  ---------------------------------------------------------------
  Here's the full breakdown control file,
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xapi:requestset xmlns:xapi = "http://xmlns.oracle.com/oxp/xapi" >
  < xapi:globalData location = 'stream' >
  < / xapi:globalData >
  < select xapi:request = ' / XX_IMB/LIST_G_PAT/G_PAT ">
  < xapi:delivery >
  < xapi:email id = "123" server = "XXXXXX.com" port = "25" from = "[email protected]" > "
  < xapi:message id = "123" to attachment = "${DESTINATION}" = "true" content-type = "text/html" subject = "Test email" > please find the attachment < / xapi:message >
  < / xapi:email >
  < xapi:print id = "print1" printer = copies "ipp://localhost:631 / printers / ${DESTINATION}" = "1" / >
  < / xapi:delivery >
  < xapi:document - output type = 'pdf' flow '123' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Email"]" > "
  < / xapi:template >
  < / xapi:document >
  < xapi:document - output type = 'pdf' flow 'print1' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Print"]" > "
  < / xapi:template >
  < / xapi:document >
  < / xapi:request >
  < / xapi:requestset >

  BI Publisher burst of CUPS printer uses no PASTA, out don't is converted from PDF to Postscript, it does when it is executed via simultaneous Manager.
  You can put an entry in the next $XDO_TOP/resource/xdodelivery.cfg (replace with your printer):
  

  
  
  
  
  ipp://mycupsserver.mydomain:631/printers/MYPRINTER
  
  /usr/local/bin/pdf2ps -paper A4 {infile} {outfile}
  
  
  
  

  Kind regards
  Gareth

• Restore the snapshot control file

  Hello
  
  The following configuration will create the snapshot control file as RMAN.
  
  CONFIGURE SNAPSHOT CONTROLFILE NAME to 'product/10.2.0/dbs/snapcf_PROD.f '; # by default
  
  My question is how to restore the control file of this snapshot to another location.
  
  Concerning
  Krishna

  VV of Krishna wrote:
  Hello

  The following configuration will create the snapshot control file as RMAN.

  CONFIGURE SNAPSHOT CONTROLFILE NAME to 'product/10.2.0/dbs/snapcf_PROD.f '; # by default

  My question is how to restore the control file of this snapshot to another location.

  Concerning
  Krishna

  HI. You actually mingle a few questions. You cannot restore controlfile from this snapshot controlfile. Snapshot controlfile goal being the other. At the resynchronization with recovery catalog RMAN must snapshot controlfile. That means and this purpose. You can restore controlfile from automatic backup or backup (controlfile) compatible.

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?

• We can to restore the content of a game without the backup control file?

  Hello
  
  I went in earlier today, a situation when someone (it wasn't me this time!):
  (1) a to back up a database and its archivelogs, in a compressed backup sets;
  (2) pushed the files to another server and
  (3) deleted everything on the server source, including ALL control files and control files.
  
  As he tried to recover the control file was missing and asked for help... I worked around the issue by using the snapshot controlfile he had forgotten (lucky me!)
  
  Now I can not remove from my mind the idea that I won't be so lucky the next time... I wonder if there is another way to work around this problem?
  
  Does anyone have an idea how to restore the contents of a backupset when we lack ALL control files and their backups? I tried to save the backup in the controlfile to a different database, but it does not work. I didn't find anyway to recreate a controlfile with a specific dbid without data files (and those who are in the backupset...).
  
  Any other idea? Best regards
  
  Gregory

  Hi arkzoyd,
  Is the only way to restore data from a backup set files using rman an instance and a controlfile so the answer is no.
  Kind regards
  Tycho

• Create the new control file

  I use oracle8i on windows XP. All the command deleted file and I couldnot create because of following erros:
  
  I wrote after a SQL command * more the worksheet:
  
  create controlfile
  student of the database
  noresetlogs
  
  I get the following erros when I run these commands:
  
  
  create controlfile
  *
  ERROR on line 1:
  ORA-01503: CREATE CONTROLFILE failed
  ORA-01565: error in file identification
  ' % ORACLE_HOME%\DATABASE\DBS1%ORACLE_SID%. ORA'
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  S/O-error: (OS 2) the system cannot find the file specified.
  
  
  It would be great if someone help me.
  Thank you.

  Hello

  You can paste the contents of the controlfile you are trying to create, and how is the db in nomount mode?

  Anand

• Identify the elements of L1 backup and restore the last control file

  DB version: 11.2
  Platform: Solaris 11
  
  We went to a database of development last month. But we kept backups rman Level0 and Level1 more archive logs generated after the last L1.
  Our N0 and N1 were planned with an interval of 4 days.
  
  The dev team now wants this DB restore in another machine. In a catalog schema, we did not keep the rman metadata. All we have is the backup pieces.
  

  stcdev_p4lor85q_1_1.bkp
  stcdev_yls3gkjl_3_7.bkp
  stcdev_mhfr8293_5_4.bkp
  stcdev_ipxsr8293_5_4.bkp
  .
  .
  .

  I don't know which of the backup are those who is from L0 and L1. If I managed to restore the last file to control the last backup of L1, then things will be easy. What happens if I am wrong to restore the old file of control of L0, which has no info on any new datafiles/tempfiles that I added after than L0.
  
  You guys, how such situations?

  After you restore the controlfile, simply ALTER DATABASE MOUNT, and delivers then a BACKUP of the LIST. The list will show you what knows the controlfile-if it shows the L0 and L1 of backups, you can use it. If it shows only the L0 backup, try to restore the 'other' controlfile.
  If you can see the timestamps of the backuppieces, which could help identify who's the backup "later."

  Hemant K Collette

• compare the version control file

  I installed the SVN server and makes the controls of the version to work.

  I tried to compare the version 2 and Dreamweaver asks me to select application to compare 2 files of versions.

  Dreamweaver has any application versions to compare?

  If this isn't the case, then can you please advise any program to download to install to compare the 2 versions?

  Also, I just found out that Dreamweaver allows any user to use two controls version or check-in and check out.

  Is it true that Dreamweaver can only use one of them at the same time?

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  Is it true that Dreamweaver can only use one of them at the same time?

  Right.  If you use version control, you don't have another option.

  Dreamweaver has compare applications version?

  N °

  Do a Google search for FileMerge, BBEdit or TextWrangler.

  Check out comparison of the differences files:

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WSc78c5058ca073340dcda9110b1f693f21-7edda .html

  Nancy O.

• ORA-00221: error on write in the control file

  Experts,

  Recently, I have been unable to connect to the console em12c and after reviewing the State of who, I got to know that my instance of database crashed.

  Status of the WHO
  . / emctl status SGD Oracle Enterprise Manager Cloud control 12 c Release 2 Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved. WebTier is in place Oracle Management Server does not work for the following reason: Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.

  I connected and checked the alert log which was below error e/s on the controlfile. I'm afraid to say that my control files are multiplexed not and I don't have a valid backup of controlfile.

  alert_log

  Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_lgwr_25655.trc file: ORA-00345: redo log write error block 39818 County 15 ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/TRCOEM/redo01.log' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 39818 Additional information:-1 Kill Jan 28 11:34:57 2014 Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file: ORA-00206: error in writing (block 3, block # 1) of the control file ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 3 Additional information:-1 Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file: ORA-00221: error about writing about a control file ORA-00206: error in writing (block 3, block # 1) of the control file ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl' ORA-27072: IO file error Linux-x86_64 error: 5: input/output error Additional information: 4 Additional information: 3 Additional information:-1 Kill Jan 28 11:34:57 2014 CKPT (ospid: 25659): put an end to litigation because of the error 221

  Please help me what should be the solution to fix this error. Is this just a mistake of e/s on the controlfile, or do I have a disk failure?

  var http://www.filedropper.com/messages

  Version of the OS: RHEL 5 (64-bit)

  Database Version: 11.2.0.3 (64-bit)

  Thank you

  Fran,

  Syslog does not display the IO error.

  I followed the steps below to solve the problem.

  1] stop the database

  [2] restore control01.dbf to the backup location.

  [3] mount the database
  [4] recover database until cancel

  [5] Alter database open resetlogs.

  Also, takes a full cold of RMAN backup of the database, the multiplex control files and recovery logs.

• ORA-01207: file is newer than the control file - old control file

  Hello

  Please indicate why I am facing this problem:

  SQL> startup
  ORACLE instance started.
  
  
  Total System Global Area 1068937216 bytes
  Fixed Size                  2233344 bytes
  Variable Size             641731584 bytes
  Database Buffers          419430400 bytes
  Redo Buffers                5541888 bytes
  Database mounted.
  ORA-01122: database file 1 failed verification check
  ORA-01110: data file 1: '/var/oracle/oradata/system.dbf'
  ORA-01207: file is more recent than control file - old control file
  
  

  I use Oracel XE 11g on CentOS

  Thank you in anticipation

  You have restored the old control file while your data files are recent. Restore the last control file and then recover your database to open it.

• DB not starting not due ORA-00205: error in the identification of 11GRAC control file

  Hello

  I have it configured in the OEL5 11 g RAC (11.2.0.1.0). When I tried to start the database using the command srvctl or by manually I get the below error. \

  RPRC-1079: failed to start of ora.rac.db resources

  ORA-00205: error in the identification of control files, see log alerts for more information

  CRS-2674: beginning of 'ora.rac.db', 'ractwo' failed

  CRS-2632: there is no more servers to try to place the "ora.rac.db" resource on which will achieve its investment policy

  ORA-00205: error in the identification of control files, see log alerts for more information

  CRS-2674: beginning of 'ora.rac.db', 'racone' failed

  The content of the alert below log.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ RACDG/rac/controlfiles/control02.ctl".

  ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control02.ctl

  ORA-15001: diskgroup 'RACDG' does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-27140: attach to post/wait installation failed

  ORA-27300: OS dependent operating system: invalid_egid failed with status: 1

  ORA-27301: OS Error Message: operation not permitted

  ORA-27302: an error occurred at: skgpwinit6

  ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ RACDG/rac/controlfiles/control01.ctl".

  ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control01.ctl

  ORA-15001: diskgroup 'RACDG' does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-27140: attach to post/wait installation failed

  ORA-27300: OS dependent operating system: invalid_egid failed with status: 1

  ORA-27301: OS Error Message: operation not permitted

  ORA-27302: an error occurred at: skgpwinit6

  ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)

  But my ASM instance is running and I am able to see the controlfiles.

  State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block

  EXTERN MOUNTED N 512 4096 1048576 20472 13772 0 13772 0 N RACDG.

  I don't know is there any problem of perission. Oracle cluster and DB is running as user 'oracle '.

  Nobody does face this problem before? Let me know where to check this error.

  Kind regards

  007

  Hello

  Check "the correct permission must be" - rwsr - s - x '.»»»

  Stop the CRS.
  Change the permissions of the file to GI_HOME/bin/oracle for "- rwsr - s - x":

  $su - grid
  $cd GI_HOME/bin
  $chmod 6751 oracle
  Oracle-l $ls

  Start the /CRS.

  Start your database.

  Thank you

  Sundar