Restore the snapshot control file

Similar Questions

• Identify the elements of L1 backup and restore the last control file

  DB version: 11.2
  Platform: Solaris 11
  
  We went to a database of development last month. But we kept backups rman Level0 and Level1 more archive logs generated after the last L1.
  Our N0 and N1 were planned with an interval of 4 days.
  
  The dev team now wants this DB restore in another machine. In a catalog schema, we did not keep the rman metadata. All we have is the backup pieces.
  

  stcdev_p4lor85q_1_1.bkp
  stcdev_yls3gkjl_3_7.bkp
  stcdev_mhfr8293_5_4.bkp
  stcdev_ipxsr8293_5_4.bkp
  .
  .
  .

  I don't know which of the backup are those who is from L0 and L1. If I managed to restore the last file to control the last backup of L1, then things will be easy. What happens if I am wrong to restore the old file of control of L0, which has no info on any new datafiles/tempfiles that I added after than L0.
  
  You guys, how such situations?

  After you restore the controlfile, simply ALTER DATABASE MOUNT, and delivers then a BACKUP of the LIST. The list will show you what knows the controlfile-if it shows the L0 and L1 of backups, you can use it. If it shows only the L0 backup, try to restore the 'other' controlfile.
  If you can see the timestamps of the backuppieces, which could help identify who's the backup "later."

  Hemant K Collette

• Retrieve by using the backup control file

  Hello

  I was reading a book called Pro Oracle Database Administration by Darl Kuhn. There, under the theme of "The valuation of the loss of all control files", noted that all data files and control files are restored from a backup, because if we do not restore the data files the RCS in control files would be lower than the data in these scenarios files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It is then mentioned to use 'recover the database by using the backup control file' then apply the logs (archive and redo if necessary).

  However I personally tested this script in a test environment and to bring all the backup control file could issue the same command as above and recover the database.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  Thank you

  If we do not restore the data files, the RCS in control files would be lower than the data files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.

  It would be incorrect you have determined. You can only restore the control files. You can manually create a control file and always do the restore.

  My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.

  The control file is updated as well.

  See you soon,.
  Brian

• to restore the msvcrt40.dll file

  to restore the msvcrt40.dll file

  If the file has been deleted, you can either try to

  (1) to perform a restore point system through the system restore feature

  'or '.

  (2) use a freeware call "recuva" and it will scan your drive for all deleted files are recoverable.

  be said in passing, do not try to download this dll from any Web site in order to replace your missing one.   If so, you will probably infect your system.

• Disable the break control file

  Please can someone tell me how to disable the breaking control file that is attached to a data definition, it is no longer necessary for this definition of data...

  I need an option without re-creating the data definition

  Concerning

  Check this https://community.oracle.com/thread/1027694

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• How to get the break control file in the xml editor

  Hi all
  
  I use oracle Apps r12 and Bi publisher 10g.
  
  I followed these steps to burst Xml reports
  
  http://apps2fusion.com/apps/21-technical/251-xmlp-concurrent-program-revisited-with-bursting.
  
  I created the definition of data and now I need to reach the break control file.
  
  If the system will generate burst control file after the creation of data definition, or to create a control file.
  
  Thanks and greetings
  Srikkanth.M

  You must create a control file and upload it.
  You can also check this blog for detailed steps http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html

• the multiplexing control file

  I tried to multiplex the control file, here are the steps I followed
  (1) normal stop
  (2) copy the controlfile to another location
  (3) to change the parameter file
  (4) start
  
  but my database is always the default control files 3 poster, what could be the problem?.,...
  
  Thanks in advance

  Here is an example how multiplex control files with Oracle XE (10.2.0.1) on Windows when the database uses SPFILE:

  c:\oraclexe\oradata\XE>sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Fri Feb 4 09:05:43 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  805306368 bytes
  Fixed Size                  1289996 bytes
  Variable Size             226492660 bytes
  Database Buffers          574619648 bytes
  Redo Buffers                2904064 bytes
  Database mounted.
  Database opened.
  SQL> show parameter spfile
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  spfile                               string      C:\ORACLEXE\APP\ORACLE\PRODUCT
                                                   \10.2.0\SERVER\DBS\SPFILEXE.OR
                                                   A
  SQL> show parameter control_file
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  control_file_record_keep_time        integer     7
  control_files                        string      C:\ORACLEXE\ORADATA\XE\CONTROL
                                                   .DBF
  SQL> alter system set control_files='c:\oraclexe\oradata\xe\control.dbf','c:\oraclexe\oradata\xe\controL2.dbf' scope=spfile;
  
  System altered.
  
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> exit
  Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  c:\oraclexe\oradata\XE>copy control.dbf controL2.dbf
          1 fichier(s) copié(s).
  
  c:\oraclexe\oradata\XE>sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Fri Feb 4 09:08:05 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  805306368 bytes
  Fixed Size                  1289996 bytes
  Variable Size             226492660 bytes
  Database Buffers          574619648 bytes
  Redo Buffers                2904064 bytes
  Database mounted.
  Database opened.
  SQL> show parameter control_files
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  control_files                        string      C:\ORACLEXE\ORADATA\XE\CONTROL
                                                   .DBF, C:\ORACLEXE\ORADATA\XE\C
                                                   ONTROL2.DBF
  SQL>
  

  Note the syntax with the required quotes for each control file:

  alter system set control_files= '' , '' scope=spfile;
  

  Edited by: P. Forstmann on 4 Feb. 2011 09:13

• How to restore the menu bar (file-editing-display) PDF?

  How to restore the menu bar (file-editing-display) PDF? I use version Adobe Acrobat 8.1.3. Any help would be appreciated. Thank you!
  
  Kolja

  I had a similar problem with Adobe Acrobat Pro X, where the menu bar would not appear.  I was able to get menu bar to appear if I resized the document by placing the pointer on the right, left, top or bottom of the document (you see a double arrow), and then by clicking and dragging.

  The problem was definitely solved for all documents by opening Adobe Acrobat without having to open a document.  Then click on Edit in the menu bar.  Then click on Preferences.  In the preferences of the box click on full screen at the top left.  Then find the section Navigation screen complete.  Check the box show the Navigation bar.  Finally click on OK at the bottom right.

  I hope this helps someone and saves a lot of frustration.

• Post in print, using the burst control file

  Hi all
  
  We use the break control file to print and send. Email option works very well. But when it comes to printing, printing "PDF file not printed. 128 MB of memory is necessary to allow a direct PDF printing"in printing.
  
  We use CUPS and this is the way that we use for printing.
  
  IPP://localhost:631/printers/YG_MAIN
  
  When we try to run the same program manually, giving the name of the printer and the number of copies at 1, then we are able to see the pdf output. Other reports are normal bi publisher also works well, w.r.t. this printer. We face this problem when we run xml program, with the option of printing bursting.
  
  Suggestions please...
  
  ---------------------------------------------------------------
  Here's the full breakdown control file,
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xapi:requestset xmlns:xapi = "http://xmlns.oracle.com/oxp/xapi" >
  < xapi:globalData location = 'stream' >
  < / xapi:globalData >
  < select xapi:request = ' / XX_IMB/LIST_G_PAT/G_PAT ">
  < xapi:delivery >
  < xapi:email id = "123" server = "XXXXXX.com" port = "25" from = "[email protected]" > "
  < xapi:message id = "123" to attachment = "${DESTINATION}" = "true" content-type = "text/html" subject = "Test email" > please find the attachment < / xapi:message >
  < / xapi:email >
  < xapi:print id = "print1" printer = copies "ipp://localhost:631 / printers / ${DESTINATION}" = "1" / >
  < / xapi:delivery >
  < xapi:document - output type = 'pdf' flow '123' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Email"]" > "
  < / xapi:template >
  < / xapi:document >
  < xapi:document - output type = 'pdf' flow 'print1' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Print"]" > "
  < / xapi:template >
  < / xapi:document >
  < / xapi:request >
  < / xapi:requestset >

  BI Publisher burst of CUPS printer uses no PASTA, out don't is converted from PDF to Postscript, it does when it is executed via simultaneous Manager.
  You can put an entry in the next $XDO_TOP/resource/xdodelivery.cfg (replace with your printer):
  

  
  
  
  
  ipp://mycupsserver.mydomain:631/printers/MYPRINTER
  
  /usr/local/bin/pdf2ps -paper A4 {infile} {outfile}
  
  
  
  

  Kind regards
  Gareth

• We can to restore the content of a game without the backup control file?

  Hello
  
  I went in earlier today, a situation when someone (it wasn't me this time!):
  (1) a to back up a database and its archivelogs, in a compressed backup sets;
  (2) pushed the files to another server and
  (3) deleted everything on the server source, including ALL control files and control files.
  
  As he tried to recover the control file was missing and asked for help... I worked around the issue by using the snapshot controlfile he had forgotten (lucky me!)
  
  Now I can not remove from my mind the idea that I won't be so lucky the next time... I wonder if there is another way to work around this problem?
  
  Does anyone have an idea how to restore the contents of a backupset when we lack ALL control files and their backups? I tried to save the backup in the controlfile to a different database, but it does not work. I didn't find anyway to recreate a controlfile with a specific dbid without data files (and those who are in the backupset...).
  
  Any other idea? Best regards
  
  Gregory

  Hi arkzoyd,
  Is the only way to restore data from a backup set files using rman an instance and a controlfile so the answer is no.
  Kind regards
  Tycho

• Cannot restore the emails and files that have been saved in an earlier version of Thunderbird

  Thunderbird Auto-setting to update to the new version today (32.x.x). In need of a deleted message, I tried and failed to restore a MozBackup file that was created when running the version of Thunderbird (31.1.2).
  Then, I downloaded and installed version of Thunderbird yesterday (31.1.2). I ran MozBackup restore and while he went at the end of Job without error, I do not see my older emails and local files. So now I'm totally lost and worried. I have the MozBackup.pcv file and a profile that seems to keep records, premises, etc, I need. But whenever I start Thunderbird, I am asked to set up a new e-mail account. After 7 hours of reading, searching and trying, I would appreciate guidance
  Thank you

  Good to hear your problem has been fixed. You can mark it as 'Resolved' Please?
  Thank you.

• HP C3180 printer: restore the backed up files

  Hello

  With the help of Sunshyn2005, I recently realized a system recovery to restore the HP Solution Center I had

  lost that has fortunately been successful, now I want to replace the backup files that have been put on a USB key.

  Sunshyn2005 told me to put the files on my desktop, find the backup folder and open then open an exe file to restore.

  My problem is I can not find this file to open and I have no idea of what we call the name of the file I'm looking for or where it could exist and I've done a search without success the only file I've met are theHP recovery Partition and this does not open upward to display this exe file that I need.

  I have windows 8.1 which at the moment I am lost on where things are except 'This PC' and that did not help me.

  I took the first step and copied the files on my desk if anyone can help me find this folder to restore these files and complete the task.

  Cordially Eject2

  See if the link below will help you

  http://support.HP.com/us-en/document/c03056985

• How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop computer)

  I have a desktop HP Pavilion P6540F under Windows 7 Home Premium. A few days ago there was a problem with windows that virtually wiped out my OS and I had to restore my computer to factory settings. Before restoring my computer I backed up all my files on a disk. After Reinstalling windows, I placed the drive with all my files recovery on it in my computer and running the recovery .exe file that has started downloading my files. All of this worked perfectly well but the problem is that these files only stored in a file on my desktop and has not been restored to its original location. Is it possible to get these files to restore to the correct locations on my computer without having to manually, drag the files to their old location? Honestly, I don't know where many of these files were located before the restoration and many items such as preferences for certain programs are impossible for me to move. Thanks for the help.

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?