The NVIDIA NDIS IO Control Driver service failed to start
NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.
It's the correct driver.
Ooohhh, you see in the event Log?
I looked in the NVIDIA forums and found this:
I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...
If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any. Looks like you don't need to start.
If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like. (Do you know how?)
If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).
Tags: Windows
Similar Questions
-
Log name: SystemSource: Service Control ManagerDate: 17/07/2011-21:12:53Event ID: 7000Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: ivan-PCDescription:The BCM42RLY service failed to start due to the following error:The system cannot find the specified file.The event XML:
7000 0 2 0 0 0 x 80000000000000 203523 System Ivan-PC BCM42RLY%%d Kooriginal title: can someone please help...Hello
1. you are using a Dell computer?
2. What is the model number of your computer?
3. don't you make changes to your computer before the problem?BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.
-
original title: NETBios TCPIP of missing in Device Manager
I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7000
Date: 16/01/2012
Time: 12:31:17
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The NetBios over TCP/IP service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 12:31:17
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 13:32:01
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:
A device attached to the system does not work.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 16/01/2012
Time: 13:32:01
User: N/A
Computer: JARRIOUSSTUDIO
Description:
The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:
A device attached to the system does not work.
When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.
Hi Diddy Dell,
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
Windows wireless and wired network connection problems
-
What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000
Hello
1. Since when are you facing this problem?
2. What is the number of brand and model of the computer?
3. have you made changes on the computer recently?
BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspxHope the information is useful.
-
VCenter 6 Services fail to start on startup
Physical server 2012R2 6 VCenter server stopped for hardware maintenance and booted up fine afterwards.
During the shutdown, this event was logged in the application log:
The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event is on another computer, the display information had to be saved with the event.
The following information has been included in the event:
Launch of VMware VirtualCenter shutdown
the message resource is present, but the message is not in the string/message table
After starting most of the Vcenter services had not begun, nor could they be started manually. I it goes back to the first failure recorded in the system log:
The VMware HTTP Reverse Proxy service stopped with the following special service error:
Incorrect function.
I can't start this service manually, it fails with the same error. All other services fail with an error of dependence.
This is very frustrating, because we have upgraded this server from Server 2008R2 for the same reason, the service would not start. When there are Server 2008R2 his running 5.1, we tried the upgrade to 6 but it failed and we couldn't solve it, so we completely removed Vcenter and tried a new install, it didn't until I managed to 'wrong' Setup by changing the Manager of VMware vCenter workflow service to run as local system if not always failed. We have therefore installed and running, then after the first reboot comes to fail start services! So we fresh installed Windows 2012R2, installed VCenter without any AV or other "crust" to make sure it would work, which was the case. Now this 'thing' just continues to fail like that once!
DNS is fine functiong and the server has survived a number of reboots yesterday, no idea why it does not now!
James
Thanks to the Ram from VMware support we figured out that WWW Publishing service has been installed, the value manual start, but has been started. The VMware Reverse HTTP Proxy service is listening on port 80, so that caused a conflict.
This was due to an installation of Veeam One, which has been deleted, but left the installed IIS components. Gahh!
Required ports for vCenter Server 6.0
How to change the TCP port for Internet Information services
Ports: Veeam ONE Deployment Guide
Article KB of Veeam do not notify IIS components.
I do not think that this question concerns the problems we had on Server 2008R2, but given that this facility is gone, I can't confirm.
Solved
Thank you
-
The TOSHIBA for Bluetooth ACPI driver update failed
Hi all
I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.
When I tried to download the latest version of the driver it says that I have the latest version of the driver.
He also says that the device is functioning properly.It does not recognize my S4 where before he did.
I now can not get it to pair because he does not see.When I did the last update of MS that I noticed the results put BT update failed, as shown below.
Any ideas on a fix would be appreciated.
The TOSHIBA for Bluetooth ACPI driver update
Installation date: 08/08/2015-09:37
Installation status: failed
Error details: Code 80246005
Update type: recommendedThis driver has been provided by TOSHIBA for the support of Bluetooth ACPI
More information:
http://sysdev.Microsoft.com/support/default.aspxHelp and Support:
http://support.Microsoft.com/select/?target=hubBT is activated using the function keys?
What is the status of the Bluetooth technology in Device Manager?
You see errors, some yellow exclamation?What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
No doubt this has problem of BT -
Qosmio F10: nVidia GF Go 5700 - driver update fails
I have a problem:
I'm not able to update the driver for the nvidia card of the 6.14.10.6612 (which since 2004!)
I tried on the nvidia homepage, but none of the driver works with my laptop... (I've read that this is not recommended on other post, but it was my only chanche!)
I also tried to download, Toshiba, the drivers from nvidia F30... without success!I need to update this driver because when I try to install x9.c windows MCE direct give me an error, a this is due to the 6.14.10.6612 pilot who did not have WHQL certificate...
Please give me an answer...
I need to install it as soon as possible!Hello
If you n t find any new drivers on the Toshiba page then I guess there are no updates.
New laptops sometimes use the same graphics card. Therefore, you should check the books that could support the same graphics card. Then go into the areas of driver for the graphics drivers. But if you want to find anything so unfortunately, it updates of any pilot aren t.Optionally, you can find something useful on the omega driver page.
But be aware that the Toshiba drivers are NOT similar with the manufacture of graphics cards drivers. Drivers Toshiba supports a card protection against overheating and regulates the temperature of production because the computers laptops don't use modules of cooling for as desktop graphics cards
-
When you restart the XP machine, get the error 'search for floppy drive has failed.
When I restart I always get:
"Search for floppy drive has failed.
Press F1 to continue, F2 to run the configuration utility.
When I have strike F1 Windows loads but how do I get around this?
I am running Windows XP. I don't know what other information you need.* original title - startup problem.*
Hello
The BIOS is configured to boot from a floppy disk to 1.
/ Settings (BIOS/CMOS) often F2 so watch the screen you start for the key - set the
First start stopped on the hard drive.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Dependency or service failed to start. / Loss permission on the Admin account
I recently started getting this message every time I try to run programs or services. I can't run anything with admin privelages, nor that I can UN - do the last change I made, which was to allow the activity of user controls.
What I can do: connect to the Internet. Play games or run programs that do not have the windows icon of security around them.
I can not do: run a program as administrator. Update Windows Defender. Start programs that have to do with my antivirus. Change or open security or system settings.
Any ideas on what went wrong past and how to solve this would be wonderful.
I just finished check that something based on the installation of another program. In doing so, I noticed that my system, administrator and user permissions have been limited, and a TrustedInstaller got all permissions. All I am allowed to do is read run, or read. How can I get my return authorizations?
Hi Balduron04,
You did it changes on your computer before the problem?
I suggest you start in safe mode and do a System Restore in safe mode until your computer was working normally and check if the problem persists.
Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
When you try to connect to my Vista account download the above, m essage. Other accounts work, but as is the VDP administrator who does not open a session cannot make changes.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I'm not able to install a hp psc 1610 all in one Windows xp on one of my computer. Once I plug the Hardware Wizard take control and finally Miss installation
I do installation even on my second computer and done everything very well. I don't know what the problem is! both are wxp 2002 sp3Hello
· You receive an error message or error code?
You can see the link and search for troubleshooting steps about the error message or error code that you receive the printer.
-
Satellite P100: HARD drive sometimes fails to start or just not responding
I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.
Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.
Although it seems not take a long time.
Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.
any ideas or help greatly received.
DavidPost edited by: daviddean
Hello David
It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.
It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).
Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.
-
Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll. Three event log entries are created, as indicated under my signature. Can someone help me please?
Thank you
Jeff
Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c
The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68
Exception code: 0xc000001d
Offset: 0x00000000020f5fa3
ID of the process failed: 0 x 1280
Start time of application vulnerabilities: 0x01d0cb85de3cf6e8
The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe
Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll
Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5
--------------------
Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.
Program: Adobe Photoshop Lightroom
File:
The error value is listed in the additional data section.
User action
1. open the file again. This could be a temporary problem that can be corrected when the program runs again.
2. If the file is still not accessible and
-C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.
-C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.
3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.
Additional data
Error value: 00000000
Disc type: 0
--------------
Fault of type 166477209, bucket 20
Event name: APPCRASH
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: lightroom.exe
P2: 6.0.0.10
P3: 5523190c
P4: libcef.dll
P5: 3.1750.1805.0
P6: 53eb9d68
P7: c000001d
P8: 00000000020f5fa3
P9:
P10:
Attached files:
C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML
These files are available here:
C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46
Symbol of the analysis:
Recheck for solution: 0
Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5
State: 0
Hi Jeffrey,.
Please refer: " Lightroom 6 crashes when I try and open it." Signing off CC does not help :-(
I hope this helps.
Concerning
Megha Rawat
-
I CAN'T DO FILE/PRINTER SHARING.
I GET a MESSAGE SHOW "SERVER SERVICE NOT STARTED" I ALSO TRIED WINDOWS HELP AND IT SAYS HELP AND SUPPORT NOT START. HOW CAN I GET THESE TO START AUTOMATICWhat version of Windows, including the service pack is installed? (Do right click my computer and select Properties, if you do not know)
The method 1 and method 2 in this article--> http://support.microsoft.com/kb/885859
If you're in the Services applet according to method 1, also make sure that the Startup Type is set to automatic (to resolve, double-click the entry in the Services; Startup type is under the general tab).
You can also start Help and Support by using the Services applet (its Startup Type can be manual or automatic).
If you receive error messages when you try to follow the steps above, report completely, without paraphrasing.
The fact that two fairly common services do not work can mean that something more sinister is happening. What antivirus application do you use? What's his current subscription? Its subscription has already been authorized expiration?
You can download, install, update and run MalwareBytes AntiMalware (it of free and can be removed later if you wish).
-
Original title: Start-up aid
Well, then I got the bluescreen 0cx000021c yesterday and got during windows startup. I think it is a blue screen of material, if I'm wrong?
Which is probably my HARD drive that I got a response from here somewhere, and the guy said it was probably a faulty HARD drive.
I had to get my data from the school of my pc, so I can send my laptop MSI for repairs. I could not find a way to copy my D drive on my drive externel but tried Diskpart to clean everything first, and maybe put it on the C drive D drive, hoping that I could do a clean install without losing the files of my D drive.
Now to the problem. I feel really stupid to do so, especially to be a 1st year in a COMPUTER at the College course. I use Diskpart and I accidentally this is cleaned up, and I cleaned my table of partition or something like that. So now all my partitions are parties, I have read that maybe my files still on my laptop just my scores have disappeared.
Now I can't get to the CMD, at the start of my laptop, it says there is no media and then goes to BIOS. I tried a cd Hirensboot, but he repeats to me without media present I also put on Cd/DVD boot first priority
Hi TonSchepers,
You deleted the partition, it would be extremely difficult to recover data. You may need to use some third-party data recovery software to get your data.
Third party WARNING: Using third-party software can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
If your computer is under warranty, please consider the manufacturer. If this is not the case, try these suggestions.
Remove the hard drive of this computer and connect it to a working computer. Check if it detects the hard drive. If it detects, see if you can back up your data on this computer.
Try to format the hard drive using another computer and connect it to your computer and check if detects also in the computer.
Note: Formatting the hard drive, you erase the data on this subject.
Hope that the information provided is useful. Do not respond if you need more help.
Maybe you are looking for
-
Possible to delete the pix of Photos &; keep about iCloud?
I'm a jump and move photos to another management/editing software. I want 90 GB free on my Macbook Pro by deleting all my photos photos, but I want to KEEP all my photos (30,000 of them) in iCloud. It is an intermediate movement until I am sure that
-
Battery Bluetooth & type of connections with a Satellite P100
Dear all,before buying my new laptop that I used an other brand laptops, and they came with a supporting more Com and file transfer bluetooth applications. But when I start using Toshiba P100-221 I lost all.Maybe I don't know how to activate them or
-
What is this mean:MVI_3165 ~ 1.wmv is not indexed and cannot be imported?
What is this mean:MVI_3165 ~ 1.wmv is not indexed and cannot be imported?
-
Magic jack does not work on Vista
Please help, I have tried everything with the Magic Jack support team and has even received a replacement and it does not work with windows.What can I do to fix this and get my Magic jack to work?
-
dirty scan image when using the charger - m225 printer
use of m225dw printer for 4 months now. scan of the magazine images have vertical lines all over the place in the document. Please advise how to clean the part of the supply. I don't think I have the same problem when scanning using the glass. Pleas