Qosmio F10: nVidia GF Go 5700 - driver update fails

Similar Questions

• Pavilion g6-2002au: USB driver update failed

  I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

  This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

  http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

  And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

  

  There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

  

  Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

  I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

  This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

  

  Any ideas why this (the driver update failure) happens?

  Davidk10

  @Davidk10

  There is no update from HP, the prograns you are using is not supported by HP.

• The NVIDIA NDIS IO Control Driver service failed to start

  NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

  It's the correct driver.

  Ooohhh, you see in the event Log?

  I looked in the NVIDIA forums and found this:

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

  I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

  If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

  If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

  If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

• Qosmio F10 grafic card GForce 5700 128 MB has been replaced the GForce 6600 128 Mb

  Is everyone has the same problem for Toshiba Qosmio F10 after video card replaced
  Lines on the screen or the computer does not start properly only fan works but not the Windows logo on the screen appears

  Hello

  This sounds not really well I put t know what that service facts guys
  Either it forgot to plug something or there is a power failure.
  I think you should communicate with the guys again to clear this ridiculous situation.

  I already answered your other post. There you should find the link to the ASP database

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

  A long download and install driver for Nvidia ended with the message of this failure. What should I do?

  You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

  Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

  Hello

  I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

  Thank you very much, Rich

  Hello

  Follow the steps below to uninstall the driver:

  1. Press the Windows key + R
  2. Type devmgmt.msc
  3. Press Ok
  4. Right-click on the graphics card and select Uninstall
  5. Restart the computer

  After the computer restarts, run the Windows Update and the last update will be installed.

• The driver update failed

  When I try to update my drivers on hp.com, it says I need to download a file to automatically scan my computer. So I download and nothing happens, it opens, downloads, disappears and it is. I downloaded 5 times and I'm still not able to update my drivers.

  Im sure that I need to update, because my computer crashes randomly. Any suggestions would be helpful, but please make it easy for me to understand. I am not very computer

  Laptop HP G62 - 208CA

  captain_kirk_9,

  The error you received since the start of the test, is that the HARD drive has failed.

  Here is a link to a phone number to call HP and see what repair options, they may have for you.

  Also, here is a link to your service manual that has the part number for your disk and show you how to install a new HARD drive.

  Page 47.

  Your HARD drive is a reference number of 320 (7200 RPM) 599055-001

  Here is a link to the HP parts store

  I would like to know how everything goes.

  Nice day.

• Qosmio F10: What to do with the update tool CD after the replacement of the motherboard?

  Hi, hoping someone can help.

  My F10 had three new mother advice, since one broke down. Fortunately, I had paid for the extended warranty. However, when she came back this time they had formatted my drive was hard because they changed the chip set. Now he can't find a TV signal and the FN keys do not work. They sent me new CD-ROM entitled "Update Tool" and "Qosmio Player Update", but they do nothing to help the problem. Anyone has any ideas or will he be back again?

  Thanks in advance
  Chris

  It of very strange that you didn't receive the Instructions for use.
  Have you checked if there is any description how to upgrade the utilities?

  I think that if you have not received any operating instructions how to use the update of the Tools CD, you should ask the guy to service for such documents.

  In my opinion, the update of the tools is necessary because the new material and new chipset was installed and in this case the old drivers or utilities would not work.

• NVIDIA geforce GT 545 driver update

  Hi, I bought a product personalized Pavilion H8 - 1080t #: LP029AV #ABA. I opted to have a Nvidia Gforce GT545 with 3 GB of vram. Until recently, I have difficulties with all programs.

  Now Photoshop was crashing when you do heavy graphics manipulations. I was wondering where I can find a newer for my video card driver as others have said once they install newer drivers, photoshop has stopped crashing. It was also almost a year saince driver was last updated. last update was 14/03/12. Would apreciate any help. TIA

  Cyberwasp, welcome to the forum.

  Here is a link to the section of the driver from nVidia on their Web site.  You can also use their "Automatic Detection" function if you are uncomfortable with the manual process.

  If your problem is solved, please click "accept as a Solution.

• The NVIDIA NVS 3100 m driver update

  Microsoft Update recommend an update "in option Nvidia 3100 M driver".  The last update crashed my WIN7 64 bit system analysis "that crashed" requiring a full system restore & restore to the original 3100 M version 188.98.  Someone had problems with the version published in November 2010 and recommended as an update.

  Hi JumpingThruHoops,

  When Windows update offers any updated driver device, they are all optional, which means that they are not important or recommended.

  All the drivers that are released through Windows update are provided by the manufacturer of the device.

  For more information on the November published the version that you can contact Nvidia support.

  Support NVIDIA

  http://www.nvidia.com/page/support.html

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• The graphics driver update failed: 'WindowsUpdate_800705B4 '.

  I didn't know youre not suppose to install optional updates. How can I put an end to this problem: failed to update the graphics driver: "WindowsUpdate_800705B4" "WindowsUpdate_dt000"?

  I just download optional updates. Help!

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• IDT High-Definition Audio Driver Update Failed

  PC HP Pavilion p6-2378 - Windows 8.1

  Updated recommended audio driver may 12, 2014, and he could not install.

  SoftPaq number: SP66216

  Version: 6.10.6491.0Dp1

  Tried again several times, has failed every time.  Restarted three times - nope.   Checked cables.

  At a loss.  Help, please.

  Hello

  What is the error message? On my machine:

  

  Kind regards